1976 Avanti II Camshafts
More 1976 Avanti II Camshafts
Find your specific 1976 Avanti II original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1976 Avanti II Camshafts
Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)
from
$533.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)
from
$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam for Chevrolet Small Block (Part No.12-433-8)
from
$522.99
HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
- 288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)
from
$529.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.CL12-205-2)
from
$1257.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-433-8)
from
$1097.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)
from
$366.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8 (Part No.22015)
from
$1566.99
Edelbrock part #22015 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde
Product Features:
See More
Product Features:
- Iron Camshaft Material
- 0.539 in. Intake Valve Lift with Factory Rocker Arm Ratio
- Roller Lifter Type
- Valve Springs Required
- Assembly Lubricant Included
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)
from
$334.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)
from
$287.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit for Chevrolet Small Block (Part No.K12-205-2)
from
$1482.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – CAM AND LIFTER KIT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.CL12-250-3)
from
$326.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy 212/218 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-412-8)
from
$1097.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Popular 1976 Avanti II Camshafts Categories
1976 Avanti II Camshafts
Maybe you’re in the middle of a full rebuild of that 1976 Avanti II. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 5 different Camshafts in our inventory ranging from $287.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1976 Avanti II running smoothly.
Camshafts are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Avanti II. Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1976 Avanti II, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Camshafts to keep your 1976 Avanti II rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1976 Avanti II Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Avanti II demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your II the best it can be. Be sure to browse some of our top Camshafts brands and parts.
Popular Edelbrock Camshafts
We carry Edelbrock parts in our stock across Camshaft and Lifter Kits categories, plus more. For a 1976 Avanti II, our most popular Edelbrock Camshafts include:
from
$334.99
(1)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
FAQs for 1976 Avanti II Camshafts
What are the most purchased Camshafts for the 1976 Avanti II?
Out of 5 Camshafts for the 1976 Avanti II, the most popular in our inventory are:
from
$366.99
This product is not rated
Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8
Camshaft and Lifter Kits
from
$1566.99
This product is not rated
Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8
Camshaft and Lifter Kits
from
$441.99
This product is not rated
Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8
Camshafts
