1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products
More 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1975 Oldsmobile Cutlass Salon, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products
Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)
from
$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
Carquest Premium – Ignition Switch Connector (Part No.PTA1273)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, FR45 (Part No.3686)
from
$4.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
- OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and optimal performance.
- V-Groove Tip Design: The unique V-Groove tip design of the FR45 model enhances ignitability and overall engine efficiency.
Delphi – Ignition Control Module (Part No.DS10062)
from
$61.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- OE quality replacement parts for the right fit, form and function
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8006)
from
$59.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8111)
from
$39.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)
from
$129.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Carquest – Distributor Cap Cover (Part No.C185)
from
$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD SELECT® caps have solid brass terminals for better conductivity and greater resistance to electrical pitting and erosion for a longer service life
- The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)
from
$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Distributor Rotor (Part No.D448X)
from
$16.49
ACDelco Professional Distributor Rotor is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket rotor is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
MSD Ignition – Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572 (Part No.8468)
from
$14.49
This bracket allows you to easily remove the vacuum advance from MSD distributors that are CW rotation (except PN 8365 and PN 8362).
Product Features:
See More
Product Features:
- Vacuum Advance Lockout
- Distributor Accessories
- For Use On PN[8360/8361/8572]
- Size Can Be Used w/Distributor PN[8360/8361/8572]
Driveworks – Distributor Cap (Part No.24052)
from
$17.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
ACDelco – Ignition Distributor Cap (Part No.D336X)
from
$26.49
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
PerTronix – D8012 Flame-Thrower GM HEI Tune Up Buick/Oldsmobile/Pontiac/Corvette Kit Blue (Part No.D8012)
from
$175.99
Performance Tune-up KitsEverything you need to “wake up” your stock Chevy, Olds, Pontiac, Cadillac or Buick distributor. Kits include street-strip 4-pin module and coil combination, premium rotor and cap, custom Flame-Thrower coil cover, adjustable vacuu
Product Features:
See More
Product Features:
- PerTronix D8012 Flame-Thrower GM HEI Tune Up Buick/Oldsmobile/Pontiac/Corvette Kit Blue
- Kits include street-strip 4-pin module and coil combination.
PerTronix – D8010 Flame-Thrower GM HEI Tune Up Buick/Oldsmobile/Pontiac/Corvette Kit Black (Part No.D8010)
from
$175.99
Performance Tune-up KitsEverything you need to “wake up” your stock Chevy, Olds, Pontiac, Cadillac or Buick distributor. Kits include street-strip 4-pin module and coil combination, premium rotor and cap, custom Flame-Thrower coil cover, adjustable vacuu
Product Features:
See More
Product Features:
- PerTronix D8010 Flame-Thrower GM HEI Tune Up Buick/Oldsmobile/Pontiac/Corvette Kit Black
- Kits include street-strip 4-pin module and coil combination.
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8102)
from
$35.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8126)
from
$39.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Delphi – Ignition Coil (Part No.F3000204504DEL)
from
$60.40
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.
Product Features:
See More
Product Features:
- Improved dwell accuracy decreases module and coil temperatures for greater reliability
- Noise abatement material between laminations reduces audible coil noise
- Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
- Lower primary inductance provides high-speed performance
- Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
- Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
- Direct connection to spark plugs (via small boot) eliminates spark plug wires
- Composite iron coils provide programmable energy
- Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
- Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
- Radio frequency interference (RFI) suppressor optional
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Carquest Premium – Distributor Connector (Part No.FAA1133)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Ignition Switch (Part No.D1404B)
from
$31.99
An ACDelco GM Original Equipment Ignition Starter Switch is a GM-recommended replacement for your vehicle’s original component. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. This original equipment ignition starter switch has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Work with vehicle electronics to help optimize vehicle capabilities
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Ignition Switch (Part No.CS84)
from
$24.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
MSD Ignition – Distributor; V8; Late Model GM HEI; External Coil (Part No.8366)
from
$463.99
GM late-model performance enthusiasts will be happy to see this Pro-Billet distributor. The distributor, PN 8366, is a drop-in. Replacement for GM V8s using the small cap distributor with a dual connector coil found in cars from 1987-1993 and trucks from 1987 to 1995. The entire housing is CNC-machined to exact tolerances for incredible strength (Not to mention cool looks). For improved lubrication there is an extra oil tract machined into the bottom of the housing that delivers oil directly to the cam and distributor gears. Inside, a polished steel shaft receives guidance from a sealed ball bearing and an extra-long sintered bushing adds stability. This 0.500 In. shaft also receives a QPQ coating for increased friction reduction and corrosion resistance. A factory-style ignition module is supplied with the distributor so your factory wiring will plug directly in triggering this module is the responsibility of a high output magnetic pick-up.
Product Features:
See More
Product Features:
- Drop-in billet replacement for GM dist. w/small cap/external coil
- Factory style ignition module accepts factory wiring
- CNC machined billet aluminum housing and billet aluminum base
- Maintenance-free magnetic pickup and precision reluctor
- Oversized steel shaft is QPQ coated
- Guided by sealed ball bearing and an extra long sintered bushing
- Special oil tract improves lubrication to the dist./cam gear
- O-ring seals can be installed for oil press. control (Mods only)
- Supplied w/Late Model Distributor Cap And Rotor
- Legal to install in all 50 states
Carquest Premium – Distributor T1895: 100% New, With Cap and Rotor (Part No.T1895)
from
$172.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
Carquest Premium – Ignition Coil Ground Strap (Part No.DLA1034)
from
$4.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed to meet or exceed OE specifications in form, fit and function
- Attaching hardware provided (where applicable)
Popular 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products Categories
1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products
You count on your 1975 Oldsmobile Cutlass Salon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 87 Ignition and Tune-Up Products ranging in price from $2.49 to $647.99, you’re sure to find everything you need for your 1975 Oldsmobile Cutlass Salon.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 15 different brands like ACDelco, E3, and Carquest. 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 413 extensive product reviews on 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Distributor Rotor with 4.9 stars and Ignition Distributor Cap with 4.0 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1975 Oldsmobile Cutlass Salon below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1975 Oldsmobile Cutlass Salon
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Oldsmobile Cutlass Salon running right for years to come. In our inventory you’ll find brands like ACDelco, E3, Carquest, and even more.
Popular Autolite Ignition and Tune-Up Products
You’ll find popular Autolite brand products across Spark Plugs. All are waiting to get your 1975 Oldsmobile Cutlass Salon back on the road. Some of the top-rated Autolite products in these categories are:
from
$3.49
(1)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
Top-Rated Accel Ignition and Tune-Up Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Ignition and Tune-Up Products for your 1975 Oldsmobile Cutlass Salon, and some of our most reviewed Accel parts include:
from
$63.99
(25)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
Optional Spark Plug Wires
FAQs for 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1975 Oldsmobile Cutlass Salon?
Out of 87 Ignition and Tune-Up Products for the 1975 Oldsmobile Cutlass Salon, the most popular in our inventory are:
from
$5.99
(4)
RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability
Spark Plugs
What are the top-rated 1975 Oldsmobile Cutlass Salon Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1975 Oldsmobile Cutlass Salon based on customer reviews/ratings are:
from
$91.99
(5)
8Mm Super Stock Spiral Uni Bk
“I’m very happy with my 8mm spiral wires from Accel. Installed in a 94 deville 4.9 and it looks like a factory install other than the labeled wires. My”
