1975 Ford Gran Torino Valve Cover and Cylinder Heads
More 1975 Ford Gran Torino Valve Cover and Cylinder Heads
Find your specific 1975 Ford Gran Torino original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1975 Ford Gran Torino Valve Cover and Cylinder Heads
Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)
from
$107.99Product Features:
- Highest Quality Head Bolts
- Cold-Formed/Heat Treated
- Ensures Molecular Integrity
- Reduced Diameter Bolt Heads
- Hardened/Parallel-Ground Washers Included
- Rated At 170000 psi
- Manufactured By ARP
Mr. Gasket – Ultra Seal: Cylinder Head Bolts (Part No.950G)
from
$32.99
These grade 8 alloy steel, longer length bolts are designed to compensate for thread length lost when using head bolt washers. This allows increased torque and clamping. Set of 10 does one cylinder head.
Product Features:
See More
Product Features:
- Cylinder Head Bolts
- Longer-Than-Stock
- High Quality Grade 8 Alloy
- Increase Torque Settings
- Higher Clamp Loads On Gasket
Competition Cams – SUPER VALVE LOCKS, 3/8" 1 ST (Part No.612-16)
from
$553.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
ARP Auto Racing – 1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In (Part No.134-7124)
from
$7.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 Psi
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Sold As A Pair
- 1″ Adjuster Thread Length
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application with Roller Rockers
ARP Auto Racing – For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16 (Part No.134-7104)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 Psi
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- 1″ Adjuster Thread Length
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application with Roller Rockers
Sealed Power – Engine Valve Lifter (Part No.HT-900)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2083)
from
$10.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7364)
from
$141.99
Product Features:
See More
- Head: 4.100″ Bore/0.045″ Thick/9.8cc Vol.
- Intake: 1.20″x2.00″ Port/.060″ Thick
- Exhaust: 1.25″x1.48″ Port
- 5/16″ Valve Cover
- Multi Piece Configuration
Felpro – Cylinder Head Gasket Set (Part No.HS 8265 PT-1)
from
$88.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8548 PT-2)
from
$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8347 PT-1)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)
from
$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pipe Plug C.S. Square 3/8-18 Npt, Head Size 5/16 In. (sold by each) (Part No.090-019)
from
$2.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pipe Plug C.S. Hex 3/4-14 Npt X 5/8 In. (sold by each) (Part No.090-072)
from
$3.49
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1823)
from
$0.72
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)
from
$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Edelbrock – Victor Jr Small-Block Ford Cylinder Head (Part No.77169)
from
$744.99
Affordable, top quality. 500+ HP potential. High-flow 210cc intake ports. CNC gasket-matched part entries and exits.
Product Features:
See More
Product Features:
- Affordable; Top Quality
- 500+ hp Potential
- High-Flow 210cc Intake Ports
- CNC Gasket-Matched Part Entries/Exits
- Spark Plugs/Valves In The Stock Location
Edelbrock – Small-Block Ford E-Street Cylinder Heads 2.02" (Part No.5025)
from
$1268.99
The Edelbrock #5025 E-Street cylinder heads are designed for Ford 289-351 W V8 applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for e
Product Features:
See More
Product Features:
- Complete Pair
- 60cc Combustion Chamber Volume
- 170cc Intake/60cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Sealed Power – Engine Rocker Arm Kit (Part No.R-855)
from
$8.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- 1 Arm
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-847)
from
$8.99
Sealed Power Vintage parts provide coverage for applications over 35 years old, restoring classics with like-new performance. Leading-edge materials and ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Mr. Gasket – Valve Cover (Part No.9804)
from
$72.39
These valve covers are constructed of a heavy gauge steel that will also help to prevent leaks around sealing flanges. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford small block
- Chrome plated steel construction
- Sold as a pair
- Chrome Plated
Spectre – Valve Cover (Part No.5018)
from
$249.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for Ford Small Block 260-289-302-351W, this valve cover features polished aluminum construction and a smooth design. Sold in pairs, this tall profile cover includes baffles to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for Ford Small Block 260-289-302-351W engines
- Baffled for breather system compatibility
- Sold in pairs
- Polished aluminum construction
- Tall profile
- Features OEM style sealing edge
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9736)
from
$89.99
Product Features:
See More
- Use W/ Valve Springs Part #5797, 5845, 5712
- Use W/ Locks Part #9611
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Sealed Power – Engine Push Rod (Part No.RP-3186)
from
$1.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Push Rod (Part No.RP-3184)
from
$2.99
Sealed Power Vintage parts provide coverage for applications over 35 years old, restoring classics with like-new performance. Leading-edge materials and ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- State-of-the-art manufacturing
- Exceptional material quality
- Exacting tolerances
- Heat treated tips
- Stock or mild modified replacement
- Made in USA
Sealed Power – Engine Push Rod (Part No.RP-3167)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Push Rod (Part No.RP-3252)
from
$2.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Popular 1975 Ford Gran Torino Valve Cover and Cylinder Heads Categories
1975 Ford Gran Torino Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1975 Ford Gran Torino. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 50 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $1,751.99. That means you can find the exact parts or products you need to keep that 1975 Ford Gran Torino running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Ford Gran Torino. Sealed Power, Felpro, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1975 Ford Gran Torino, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 312 reviews in this category, some of the top rated parts include 289-302 Ford Head Bolt Kit with 2.0 stars and Engine Push Rod with 5.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1975 Ford Gran Torino rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1975 Ford Gran Torino Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Ford Gran Torino demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Gran Torino the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Felpro Valve Cover and Cylinder Heads
We carry Felpro parts in our stock across Cylinder Head Gaskets categories, plus more. For a 1975 Ford Gran Torino, our most popular Felpro Valve Cover and Cylinder Heads include:
Top 1975 Ford Gran Torino Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1975 Ford Gran Torino. Popular Sealed Power parts include:
FAQs for 1975 Ford Gran Torino Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1975 Ford Gran Torino?
Out of 50 Valve Cover and Cylinder Heads for the 1975 Ford Gran Torino, the most popular in our inventory are:
from
$8.49
This product is not rated
Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each)
Rocker Arm Shaft Plugs
What are the top-rated 1975 Ford Gran Torino Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 1975 Ford Gran Torino based on customer reviews/ratings are:
from
$107.99
(7)
289-302 Ford Head Bolt Kit
“Great quality bolts. They include thread locker. Would definitely recommend to anyone replacing their heads.”
from
$72.39
(1)
Valve Cover
“When I replaced the engine in my 94 F150, I wanted to replace the valve covers due to some rust on the originals. The limited availabilty and cost of ”
