1975 Ford Bronco Exhaust System Kits

Flowmaster introduces our Flow FX axle-back exhaust system for the 2021-2026 Ford Bronco with the 2.3 or 2.7-Liter engine. This system uses a Flow FX style muffler for a deep exhaust tone with an aggressive to moderate sound level and increased performance. Maximum dyno gains of 17 hp and 18 lb-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Dual 4.00-inch black ceramic coated tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our Flow FX cat-back exhaust system for the 2021-2026 Ford Bronco with the 2.3 or 2.7-liter engine and 4 doors. This system uses a Flow FX style muffler for a deep exhaust tone with an aggressive to moderate sound level and increased performance. Maximum dyno gains of 12 hp and 13 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The over-axle section is also routed to help gain an additional 2.0-inches of clearance from the axle when used on applications with modified suspensions. This allows for better suspension travel when used in extreme off-road situations. Dual 4.00-inch black ceramic coated tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

“The MagnaFlow Ford Bronco Overland Series Cat-Back Performance Exhaust system No:19556 is the perfect solution to further improve the off-road utility of your already-capable Ford Bronco equipped with the 2.3L turbo I-4. This cat-back, direct-fit exhaust kit is designed to install easily and fit perfectly thanks to the hard work of the engineers at MagnaFlow’s Tech Center, who made detailed 3D scans of the entire vehicle in order to ensure perfect fitment. The advantage of such precise tolerances is that the entire performance exhaust system is mounted closer to the undercarriage of the vehicle than the stock system, resulting in significantly improved ground clearance. No:19556 also features 3″” main piping that leads to a straight-through muffler before terminating in a single 2.5″” high-clearance side exit, which further improves the rear departure angle versus the standard tailpipe. The result of this upgrade is improved rock crawling capability and the ability to get out of tricky situations on the trail more easily. This Ford Bronco exhaust system utilizes a tunable NDT (No Drone Technology) quarter-wave resonator to eliminate unwanted noises at cruising speeds en route to your destination, with the added benefit of improving situational awareness when you’re out exploring or camping in the middle of nowhere. Exhaust kit No:19556 is engineered to produce MagnaFlow’s deep signature exhaust tone at mild interior and moderate exterior sound levels, ideal for enjoying the character of your engine without scaring Mother Nature away. This performance exhaust system is made of durable stainless steel backed by MagnaFlow’s limited warranty.”

The MagnaFlow Ford Bronco Street Series Crossmember-Back Performance Exhaust System 15344 brings enhanced engine sound and dyno-proven performance to your 2.8L, 3.3L, 3.9L, 4.7L, 5.0L Ford Bronco with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Bronco exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Bronco’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit with 2.5in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15344 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Flowmaster introduces our Outlaw High Clearance axle-back exhaust system for the 2021-2026 Ford Bronco with the 2.3 or 2.7-liter engine. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 15 hp and 16 lb-ft. were measured at the rear wheels. 2.50-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. This system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off reading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

This axle-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This axle-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2026 Ford Bronco 2 door with the 2.3 or 2.7-liter engine. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 12 hp and 13 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off-roading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2026 Ford Bronco with the 2.3 or 2.7-liter engine and 4 doors. This system uses an Outlaw style muffler for an aggressive exhaust tone and increased performance. Maximum dyno gains of 6 hp and 7 lb-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The over-axle section is also routed to help gain an additional 2.0-inches of clearance from the axle when used on applications with modified suspensions. This allows for better suspension travel when used in extreme off-road situations. Dual 4.00-inch black chrome tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2026 Ford Bronco 2 door with the 2.3 or 2.7-liter engine. This system uses an Outlaw style muffler for an aggressive exhaust tone and increased performance. Maximum dyno gains of 6 hp and 7 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. Dual 4.00-inch black chrome tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our Outlaw High Clearance cat-back exhaust system for the 2021-2026 Ford Bronco with the 2.3 or 2.7-liter engine and 4 doors. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 12 hp and 13 lb-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. This system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off reading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.