1990 Ford Bronco Exhaust System Kits

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

The MagnaFlow Ford Bronco Overland Series Cat-Back Performance Exhaust system No:19559 is the perfect solution to further improve the off-road utility of your already-capable 2021-2026 Ford Bronco equipped with the 2.7L twin-turbo V6. This cat-back, direct-fit exhaust kit is designed to install easily and fit perfectly thanks to the hard work of the engineers at MagnaFlow’s Tech Center, who made detailed 3D scans of the entire vehicle in order to ensure perfect fitment. The advantage of such precise tolerances is that the entire performance exhaust system is mounted closer to the undercarriage of the vehicle than the stock system, resulting in significantly improved ground clearance. No:19559 also features 3″ main piping that leads to a straight-through muffler before terminating in a single 2.5″ high-clearance side exit, which further improves the rear departure angle versus the standard tailpipe. The result of this upgrade is improved rock crawling capability and the ability to get out of tricky situations on the trail more easily. This Ford Bronco exhaust system utilizes a tunable NDT (No Drone Technology) quarter-wave resonator to eliminate unwanted noises at cruising speeds en route to your destination, with the added benefit of improving situational awareness when you’re out exploring or camping in the middle of nowhere. Exhaust kit No:19559 is engineered to produce MagnaFlow’s deep signature exhaust tone at mild interior and moderate exterior sound levels, ideal for enjoying the character of your engine without scaring Mother Nature away. This performance exhaust system is made of durable stainless steel backed by MagnaFlow’s limited warranty.

Product Features:

• High clearance exit
• Dyno proven performance
• No-Drone-Technology allows for a quiet cabin

The MagnaFlow Ford Bronco Street Series Axle-Back Performance Exhaust System No:19555 is engineered to make your 2021-2026 Ford Bronco sound as awesome as it looks. Conquer highways and trails alike with ease in your modern body-on-frame SUV thanks to the dyno-tested performance of exhaust kit No:19555. Mandrel bent 2.5″ main piping channels exhaust gases into a large straight-through muffler before exiting through dual 4″ black powder coated tips. The result is an exhaust kit that maintains mild levels of interior sound while allowing for moderate levels of exterior sound, all improved with MagnaFlow’s deep, signature performance exhaust tone. This combination of sound levels brings out the character of your Bronco’s engine both on and off-road without sacrificing interior comfort. CNC precision manufacturing and state-of-the-art 3D scanning techniques guarantee that No:19555 has a direct-fit design that will install easily and fit any 2021-2026 Ford Bronco equipped with the 2.3L turbo I-4. Exhaust system No:19555 features durable stainless-steel construction backed by MagnaFlow’s limited warranty.

Product Features:

• Dyno-proven performance
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0381 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0381’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0381 includes (3) 2.25in. U-Bolt Clamps and interchanges with OE parts F4TZ-5230-E, F5TZ-5230-BAA, F5TZ-5230-BDA. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0381 features durable Aluminized Steel construction and is covered by a 2 year warranty.

Product Features:

• Two year, unlimited mileage warranty
• Leaves all emissions equipment intact, maintaining emissions compliance
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability

This Hooker 2.25-inch exhaust system uses 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Product Features:

• Mandrel Bent Tubing Eliminates Restrictions in Bends and Improves Exhaust Flow
• Reduces Backpressure
• Improves Engine Efficiency
• Hardware Included
• Instructions Included

The MagnaFlow Ford Bronco Overland Series Cat-Back Performance Exhaust system No:19556 is the perfect solution to further improve the off-road utility of your already-capable 2021-2026 Ford Bronco equipped with the 2.3L turbo I-4. This cat-back, direct-fit exhaust kit is designed to install easily and fit perfectly thanks to the hard work of the engineers at MagnaFlow’s Tech Center, who made detailed 3D scans of the entire vehicle in order to ensure perfect fitment. The advantage of such precise tolerances is that the entire performance exhaust system is mounted closer to the undercarriage of the vehicle than the stock system, resulting in significantly improved ground clearance. No:19556 also features 3″ main piping that leads to a straight-through muffler before terminating in a single 2.5″ high-clearance side exit, which further improves the rear departure angle versus the standard tailpipe. The result of this upgrade is improved rock crawling capability and the ability to get out of tricky situations on the trail more easily. This Ford Bronco exhaust system utilizes a tunable NDT (No Drone Technology) quarter-wave resonator to eliminate unwanted noises at cruising speeds en route to your destination, with the added benefit of improving situational awareness when you’re out exploring or camping in the middle of nowhere. Exhaust kit No:19556 is engineered to produce MagnaFlow’s deep signature exhaust tone at mild interior and moderate exterior sound levels, ideal for enjoying the character of your engine without scaring Mother Nature away. This performance exhaust system is made of durable stainless steel backed by MagnaFlow’s limited warranty.

Product Features:

• High clearance exit
• Dyno proven performance
• No-Drone-Technology allows for a quiet cabin

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

• COMPATIBILITY — Designed for the 1980-96 Ford Bronco and a variety of F-150, F-250 and F-350 trucks
• BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
• FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
• IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
• SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on passenger side behind rear tire; dual kit runs down right-hand side between frame and driveshaft; does not fit one-ton 4×4 trucks
• COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
• PREMIUM MATERIALS — Made from quality aluminized steel for durability and long life
• BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
• WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use