1975 Checker Marathon Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 1975 Checker Marathons

ACDelco – Ignition Distributor Cover (Part No.1875960X)

Ignition Distributor Cover

from

$19.49
ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

NGK – NGK Wire Set (Part No.51417)

NGK Wire Set

from

$29.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Ignition Module (Part No.CBE1012)

Ignition Module

from

$52.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Carquest – Ignition Coil (Part No.E43)

Ignition Coil

from

$40.99
BWD SELECT® replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Manufactured using high-quality materials to provide superior durability and long service life
  • Designed and engineered to ensure precise performance
  • The BWD SELECT® HEI/DIS ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)

Distributor Cap Carbon Button

from

$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Coil Ground Strap (Part No.DL66)

Ignition Coil Ground Strap

from

$5.05
Product Features:
  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
See More

Carquest Premium – Ignition Coil Ground Strap (Part No.DLA1034)

Ignition Coil Ground Strap

from

$4.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
  • Attaching hardware provided (where applicable)
See More

Driveworks – Distributor Rotor (Part No.23045)

Distributor Rotor

from

$11.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest – Distributor Rotor (Part No.D157)

Distributor Rotor

from

$13.05
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
  • Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6118)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$40.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – NGK Wire Set (Part No.51369)

NGK Wire Set

from

$39.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – NGK Wire Set (Part No.51339)

NGK Wire Set

from

$41.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – NGK Wire Set (Part No.51355)

NGK Wire Set

from

$32.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

E3 – DiamondFIRE HEI Racing Distributor (Part No.E3.1414)

DiamondFIRE HEI Racing Distributor

from

$140.99
The E3’s DiamondFIRE Racing HEI Distributor is engineered to withstand the harsh motorsports environment regardless of what you race. The HEI distributor features a CNC machined 6061-T6 aluminum housing that has O-ring grooves, a necessity when using a fully machined race engine block. Other features that separate E3.1414 from the competition include:

Product Features:
  • Special hot forging process – eliminates weak spots and porosity
  • Coil in-cap design
  • High performance 6 Amp dwell limit module
  • GM 4-pin configuration
  • High performance wound coil
  • HEI Coil-in-Cap is available separately
  • Precision stamped & blanked cam plate & weights
  • Proprietary nitrocarburized surface treatment
  • Nylon rub pads
  • Centerless ground shaft rides on an upper sealed roller bearing
  • Fully adjustable mechanical advance
  • TIG welded throughout
  • Hardened iron drive gear
  • Comes complete with: cap, rotor and a wire retainer
  • Crosses to MSD 8362
See More

Carquest Premium – Distributor T1612: 100% New, With Cap and Rotor (Part No.T1612)

Distributor T1612: 100% New, With Cap and Rotor

from

$73.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
See More

PerTronix – 91181 Ignitor II Adaptive Dwell Control Delco 8 cyl (Part No.91181)

91181 Ignitor II Adaptive Dwell Control Delco 8 cyl

from

$171.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
  • Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
  • Synchronized peak current and spark timing reduces heat build-up.
  • Senses startup and develops more energy for quicker, easier starting.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

PerTronix – 1162A Ignitor Delco 6 cyl with Vacuum Advance (Part No.1162A)

1162A Ignitor Delco 6 cyl with Vacuum Advance

from

$124.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over “points” in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1786)

Distributor Cap and Rotor Kit

from

$13.79
Distributor Cap and Rotor Kit

Carquest Premium – Distributor Cap (Part No.CAE1064)

Distributor Cap

from

$33.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP25)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.46)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$7.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.46 is a 14mm, 0.750 reach plug with a gasket seat. It fits a wide variety of applications from the 60s to early 90s, especially import. E3.46 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
  • Wide Compatibility: The E3.46 spark plugs are 14mm with a 0.750 reach and a gasket seat, making them suitable for a wide range of applications from the 1960s to early 1990s, especially for import vehicles.
  • Widely Available: The E3.46 spark plugs are widely stocked in automotive retail stores, ensuring easy availability for consumers.
See More

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red

from

$82.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Cap; under Manif (Part No.5564)

Wire Set; Street Fire; SBC; Socket Cap; under Manif

from

$65.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Accel – 8Mm Super Stock Graphite Cust (Part No.4048)

8Mm Super Stock Graphite Cust

from

$58.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Carquest Premium – Radio Capacitor (Part No.GAC1095)

Radio Capacitor

from

$32.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Radio Capacitor (Part No.GAA1085)

Radio Capacitor

from

$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Radio Capacitor (Part No.GAA1239)

Radio Capacitor

from

$11.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 1975 Checker Marathon with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1975 Checker Marathon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Checker or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Marathon functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Ignition and Tune-Up Products for the 1975 Checker Marathon, designed to meet your needs without breaking the bank. From Spark Plug replacements to Ignition Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1975 Checker Marathon at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.29 to $290.99, with an average price of $48.56. Our 73 Ignition and Tune-Up Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1975 Checker Marathon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Checker Marathon, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like ACDelco, Champion, E3, and more. ACDelco Ignition and Tune-Up Products start at just $4.99 and boast an impressive 5 stars average rating from customers. Champion and E3 also bring quality to the table, with Ignition and Tune-Up Products available starting at $2.49, and at an average 5 stars rating. With 675 customer reviews and counting, our 1975 Checker Marathon Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1975 Checker Marathon is always ready to roll. We’re committed to providing you with everything you need to keep your Marathon in top shape, all in one place. Start shopping confidently below for your 1975 Checker Marathon!

Best-Selling Spark Plugs for 1975 Checker Marathons

Enhance the driving experience in your Checker with 17 quality Spark Plug components, starting at $2.49.

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RV15YC4 (Part No.18)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, RV15YC4

from

$3.49
Dependable Performance, OE Replacement, RV15YC4. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
  • Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the plug’s life.
  • Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug ensures enhanced reliability and optimal engine performance.
See More

NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, UR45 (Part No.6945)

OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, UR45

from

$4.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
See More

ACDelco – Copper Core Spark Plug (Part No.R44TX)

Copper Core Spark Plug

from

$4.99
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
  • Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
  • Available for use in Marine applications
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

NGK – Platinum Spark Plug – Enhanced Durability & Fuel Efficiency (Part No.3207)

Platinum Spark Plug - Enhanced Durability & Fuel Efficiency

from

$5.99
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
  • Improved Fuel Efficiency: Designed to improve fuel efficiency, helping you save on fuel costs over time.
  • Lower Emissions: These spark plugs contribute to lower emissions, making them an environmentally friendly choice.
  • Faster Starts and Quicker Acceleration: Experience faster starts and quicker acceleration, enhancing your vehicle’s overall performance.
See More

DENSO – PTF16TT Platinum TT Spark Plug (Part No.4509)

PTF16TT Platinum TT Spark Plug

from

$5.79
Twin-Tip design enables faster flame propagation for more complete combustion.
See More

ACDelco – RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability (Part No.2)

RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability

from

$6.79
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
  • Pure copper core provides great heat transfer and helps maximize plug durability
  • Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
  • Ribless insulator helps optimize plug to boot seal
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • High-Quality Suppressors: ACDelco Gold RAPIDFIRE Spark Plugs feature high-quality suppressors that help prevent misfiring, ensuring reliable performance for everyday use.
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.42)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$7.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.42 is a 14mm, 0.460 reach plug with a taper seat. It fits domestic applications in the 80s to early 90s, and is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.40)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$6.99
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.40 is a 14mm, 0.460 reach plug with a taper seat. It fits domestic applications in the 60s to early 90s, and is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITF16 (Part No.5330)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITF16

from

$10.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000░ Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
  • Superior Performance: Designed for maximum performance under extreme conditions, this spark plug delivers more horsepower, faster and easier starts, and fewer misfires under heavy loads.
  • Enhanced Fuel Efficiency: The advanced iridium technology of the DENSO Iridium Power spark plug contributes to better fuel efficiency, making it an economical choice for your vehicle.
  • Low Voltage Requirement: This spark plug requires 5,000 volts less to fire compared to conventional spark plugs, ensuring reliable ignition with lower energy consumption.
See More

ACDelco – Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability (Part No.41-905)

Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability

from

$9.79
ACDelco Professional Double Platinum Spark Plugs are premium aftermarket plugs, and are a high quality replacement for many vehicles on the road today. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Tapered Seat Design: The tapered seat type ensures a secure fit and optimal sealing in the engine.
  • High-Quality Aftermarket Replacement: Manufactured to meet high standards of fit, form, and function, making it a reliable replacement for many vehicles on the road today.
See More

Champion – Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RV17PMC4 (Part No.3018)

Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RV17PMC4

from

$4.99
Champion Platinum Power spark plugs deliver powerful performance. Made from exclusive Heat-Active alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.

Product Features:
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITF16TT (Part No.4715)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITF16TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000░ Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Tapered Seat Type for optimal performance and durability.
See More

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, UR45IX (Part No.7559)

Iridium IX Spark Plug: Single Iridium Fine Wire, UR45IX

from

$9.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
  • Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhanced fuel efficiency, making them ideal for performance enthusiasts.
  • Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
  • High-Performance Upgrade Option: For those seeking even greater performance, NGK recommends upgrading to their Ruthenium HX plugs.
See More

Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RV17PMP4 (Part No.7018)

Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RV17PMP4

from

$3.99
Champion® Double Platinum Power¿ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active¿ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active┐ alloy allows electrodes to reach optimal temperature
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.685)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$2.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.147)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$2.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

Champion – Copper Plus- Boxed – RV17YC6 (Part No.37)

Copper Plus- Boxed - RV17YC6

from

$2.49
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance.
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
  • Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
  • Built to ISO and SAE standards for proven performance
See More

Most Popular 1975 Checker Marathon Ignition Boots

Customize your Checker with 4 Ignition Boots products like Spark Plug Boots, all priced under $193.99.

NGK – NGK Wire Set (Part No.51363)

NGK Wire Set

from

$26.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Accel – GM Sb Hei 86-75 Over Vlv Cvr (Part No.9011CK)

GM Sb Hei 86-75 Over Vlv Cvr

from

$193.99
Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.

Product Features:
  • Black Ceramic boots withstand up to 2,000░ Fahrenheit
  • Black Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Stainless Steel Plug Terminals
See More

Accel – GM Sb Hei 86-75 Under Vlv Cvr (Part No.9018C)

GM Sb Hei 86-75 Under Vlv Cvr

from

$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

NGK – NGK Wire Set (Part No.51374)

NGK Wire Set

from

$41.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Top Picks for 1975 Checker Marathon Ignition Coils and Boots

Upgrade Checker Marathons with top-quality Ignition Coils and Boots parts, including 11 OEM and aftermarket selections for your 1975 model.

Driveworks – Electronic Ignition Coil (Part No.26196)

Electronic Ignition Coil

from

$31.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)

Wire Set; Street Fire; SBC; Socket Distributor Cap over VC

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1483)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$33.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1065)

Ignition Coil: Meets OE Specifications, 1 Count

from

$29.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

ACDelco – Ignition Coil (Part No.D504A)

Ignition Coil

from

$99.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1497)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$38.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Coil Ground Strap (Part No.DL66)

Ignition Coil Ground Strap

from

$5.05
Product Features:
  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
See More

Carquest Premium – Ignition Coil Ground Strap (Part No.DLA1034)

Ignition Coil Ground Strap

from

$4.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
  • Attaching hardware provided (where applicable)
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6142)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – GM Sb Hei 86-75 Under Vlv Cvr-Black (Part No.9018CK)

GM Sb Hei 86-75 Under Vlv Cvr-Black

from

$175.99
Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.

Product Features:
  • Black Ceramic boots withstand up to 2,000░ Fahrenheit
  • Black Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Stainless Steel Plug Terminals
See More

E3 – High Output DiamondFIRE HEI Racing Coil (Part No.E3.623)

High Output DiamondFIRE HEI Racing Coil

from

$65.99
The E3 HEI Coil in Cap features a superior design that works with aftermarket performance 4-pin modules and high performance electronic controls. The coil’s resistance and inductance values have been optimized to match the high amperage dwell circuits of performance ignition modules for faster charging and full coil saturation at higher RPM levels, translating into better performance. High temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring long service life. Specially designed to work with E3.1414 HEI Distributor.

Product Features:
  • Designed to with aftermarket 4-pin modules and high performance electronic controls
  • High temperature epoxy provides excellent thermal conductivity and long life
  • Maximum voltage of 48,000 volts
  • Crosses to MSD 8225
See More

In-Demand Ignition Wires for 1975 Checker Marathons

Select from 9 premium Ignition Wires parts for your 1975 Checker Marathon, with prices ranging from $39.99 to $181.99.

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Cap; under Manif (Part No.5564)

Wire Set; Street Fire; SBC; Socket Cap; under Manif

from

$65.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Accel – 8Mm Super Stock Graphite Cust (Part No.4048)

8Mm Super Stock Graphite Cust

from

$58.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8105)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red

from

$82.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
See More

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8009)

Spark Plug Wire Set: Carbon Core, 8 Wire Set

from

$62.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Accel – GM Sb Hei 86-75 Over Vlv Cvr (Part No.9011C)

GM Sb Hei 86-75 Over Vlv Cvr

from

$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

Accel – 8Mm Super Stock Spiral Cust Bu (Part No.5048B)

8Mm Super Stock Spiral Cust Bu

from

$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • High-strength Fiberglass Braid Construction
  • 8mm High Gloss Silicone Jacket
See More

Most Sold 1975 Checker Marathon Distributors

Explore our best-selling Checker parts for the 1975 Marathon among 24 OEM and aftermarket options starting from $2.29.

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

ACDelco – Distributor Rotor (Part No.D448X)

Distributor Rotor

from

$16.49
ACDelco Professional Distributor Rotor is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket rotor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Driveworks – Distributor Rotor (Part No.23045)

Distributor Rotor

from

$11.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Driveworks – Distributor Cap (Part No.24052)

Distributor Cap

from

$17.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest – Distributor Rotor (Part No.D157)

Distributor Rotor

from

$13.05
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
  • Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits
See More

Accel – HEI Distributor Cap & Rotor Kit with Arc-Thru Protection (Part No.8122)

HEI Distributor Cap & Rotor Kit with Arc-Thru Protection

from

$42.49
ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:
  • Features Protection From Arc Thru And Crossfire
  • Features 60k V Rated Alkyd Compound
  • Brass Terminals Inserts And Steel Rotor Springs
  • High Spark Energy Flow
See More

ACDelco – Ignition Distributor Cap (Part No.D336X)

Ignition Distributor Cap

from

$26.49
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Distributor Cap (Part No.C197)

Distributor Cap

from

$19.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Each anti-lock speed sensor uses OE connectors and terminals ensuring an accurate water-tight connection to the engine wire harness
  • Grommets and wire clips are included on the harness ensuring proper mounting and routing within the car chassis for a cost effective repair solution
  • High-quality glass reinforced plastic resin provides both high temperature and environmental protection resistance
  • Each direct replacement wire harness comes with a protective sleeve preventing wires from chafing and creating short circuits
  • All ABS sensors are 100% tested for proper fit, form and function
See More

Carquest Premium – Distributor Rotor (Part No.DAA1001)

Distributor Rotor

from

$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Cap (Part No.24E1007)

Distributor Cap

from

$15.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest – Distributor Rotor (Part No.23A1006)

Distributor Rotor

from

$7.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Cap (Part No.CAE1055)

Distributor Cap

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor T1895: 100% New, With Cap and Rotor (Part No.T1895)

Distributor T1895: 100% New, With Cap and Rotor

from

$172.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest – Distributor Cap Cover (Part No.C185)

Distributor Cap Cover

from

$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD SELECT® caps have solid brass terminals for better conductivity and greater resistance to electrical pitting and erosion for a longer service life
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Distributor Rotor (Part No.DAA1029)

Distributor Rotor

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap (Part No.CAE1095)

Distributor Cap

from

$17.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Ignition Distributor Cover (Part No.1875960X)

Ignition Distributor Cover

from

$19.49
ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

E3 – DiamondFIRE HEI Racing Distributor (Part No.E3.1414)

DiamondFIRE HEI Racing Distributor

from

$140.99
The E3’s DiamondFIRE Racing HEI Distributor is engineered to withstand the harsh motorsports environment regardless of what you race. The HEI distributor features a CNC machined 6061-T6 aluminum housing that has O-ring grooves, a necessity when using a fully machined race engine block. Other features that separate E3.1414 from the competition include:

Product Features:
  • Special hot forging process – eliminates weak spots and porosity
  • Coil in-cap design
  • High performance 6 Amp dwell limit module
  • GM 4-pin configuration
  • High performance wound coil
  • HEI Coil-in-Cap is available separately
  • Precision stamped & blanked cam plate & weights
  • Proprietary nitrocarburized surface treatment
  • Nylon rub pads
  • Centerless ground shaft rides on an upper sealed roller bearing
  • Fully adjustable mechanical advance
  • TIG welded throughout
  • Hardened iron drive gear
  • Comes complete with: cap, rotor and a wire retainer
  • Crosses to MSD 8362
See More

Carquest Premium – Distributor Cap Cover (Part No.CAC1073)

Distributor Cap Cover

from

$17.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Accel – Ignition/Electrical (Part No.130120)

Ignition/Electrical

from

$16.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:
  • Max stability for all RPM ranges
  • Heavy duty for maximum energy transfer
See More

Carquest Premium – Distributor T1692: 100% New, With Cap and Rotor (Part No.T1692)

Distributor T1692: 100% New, With Cap and Rotor

from

$127.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

MSD Ignition – Distributor Cap; Crab Cap; HEI Terminal; fits PN8486/PN 8489 (Part No.8541)

Distributor Cap; Crab Cap; HEI Terminal; fits PN8486/PN 8489

from

$96.99
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont(R) rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the rynite material is extremely strong.

Product Features:
  • Rynite molded cap
  • HEI style spark terminals
  • Designed w/Performance In Mind
  • High quality; voltage insulating material
  • Used For MSD PN[8567/84673]
  • Fits In Extremely Tight Areas
  • Red
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1787)

Distributor Cap and Rotor Kit

from

$15.99
Distributor Cap and Rotor Kit

Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)

Distributor Cap Carbon Button

from

$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top-Rated Ignition and Tune-Up Products Brands For Your 1975 Checker Marathon

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1975 Checker Marathons. Below you’ll find some of our best rated Ignition and Tune-Up Products from ACDelco, Champion, and E3, and more. Ignition and Tune-Up Products from these brands that fit a 1975 Marathon start at just $2.49 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 1975 Checker Marathon Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1975 Checker Marathon, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Ignition and Tune-Up Products, specifically designed for the 1975 Checker Marathon. With over 8 ACDelco brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $31.13. Plus, with over 30 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Ignition Distributor Cover
from
$19.49
This product is not rated

Ignition Distributor Cover

“”

Ignition Coil
from
$99.99
This product is not rated

Ignition Coil

“”

Popular Champion 1975 Checker Marathon Ignition and Tune-Up Products

Champion auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1975 Checker Marathon owner should feel confident when installing genuine Champion parts in their vehicle. To ensure the best fit and performance for your 1975 Marathon, Advance Auto Parts carries a full inventory of 4 Champion Ignition and Tune-Up Products. Plus you will be keeping your Checker in peak condition while saving money because prices on these Champion Ignition and Tune-Up Products range from $2.49 to $4.99, plus, with more than 5 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

Copper Plus- Boxed - RV17YC6
from
$2.49
This product is not rated

Copper Plus- Boxed – RV17YC6

“”

FAQs for 1975 Checker Marathon Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1975 Checker Marathons?

Out of 73 Ignition and Tune-Up Products that fit 1975 Checker Marathons, the following parts are the top sellers:

What’s the price range for 1975 Checker Marathon Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1975 Checker Marathon start at $2.29 and go up to $290.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1975 Checker Marathon?

The average price for Ignition and Tune-Up Products for the 1975 Checker Marathon is $48.56. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Checker Marathon model years?

Yes, we currently carry Ignition and Tune-Up Products for 21 model years of Checker Marathons between 1961 and 1982. Ignition and Tune-Up Products are bought most frequently for the following model years: 1982, 1981, 1980, 1979, 1978, 1977, 1976, 1974, and 1973.

What are the cheapest Ignition and Tune-Up Products for my 1975 Checker Marathon?

The cheapest 1975 Checker Marathon Ignition and Tune-Up Products we carry in stock are:

What are the top-rated Ignition and Tune-Up Products that fit the 1975 Checker Marathon?

Out of 675 reviews by customers, our 1975 Checker Marathon Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1975 Checker Marathon and their top-rated products:

What types of Ignition and Tune-Up Products do you sell for my 1975 Checker Marathon?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1975 Checker Marathon:

Can I get help with 1975 Checker Marathon Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Checker Ignition and Tune-Up Products and more.

What is your return policy for Checker Marathon Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Checker Marathon Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.