1974 Plymouth Barracuda Drivetrains
More 1974 Plymouth Barracuda Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1974 Plymouth Barracuda, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1974 Plymouth Barracuda Drivetrains
Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)
from
$177.99
Product Features:
See More
- Clutch kit
- Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
- Smooth design
MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)
from
$14.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 315G, 317, 319 & 457
- Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)
Yukon Gear – Cross Pin Bolt (Part No.33067)
from
$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.
Product Features:
See More
Product Features:
- Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
Motive Gear – Differential Ring and Pinion (Part No.C8.25-456)
National – Shaft Repair Sleeve (Part No.99112)
from
$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
National – Bearings (Part No.382S)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.3638)
from
$12.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$4.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)
from
$182.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)
from
$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.
Product Features:
See More
Product Features:
- Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.59016)
from
$427.99
Product Features:
See More
- Fits Chrysler Dana Spicer 60 with 35 spline axles
- 4.10 and down ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Bearing Install Kit For Chrysler 8.75" Four Pinion (#89) Differential (Part No.11010)
from
$289.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’89’ case housing with 25520 carrier races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)
from
$633.99
89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- ’89’ case design
- Nodular iron for added strength
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Dorman – Spindle Washer – I.D. 16.7 mm O.D. 34.0 mm Thickness 3.2 mm (Part No.618-021.1)
from
$8.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)
Motive Gear – Differential Crush Sleeve (Part No.3102)
Powertrax – Lock Right Locker (Part No.1240-LR)
from
$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Spicer – Differential Ring and Pinion (Part No.25127-5X)
from
$549.99
All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
See More
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$198.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Pinion Seal (Part No.6808N)
from
$24.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – 0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35 (Part No.33334)
from
$5.99
0.260″ diameter cross pin roll pin for 8.75″ Chrysler, 8″, 9″ Ford, and Model 20 and 35.
Product Features:
See More
Product Features:
- Roll pin for Chrysler 8.75″, Ford 8″ and 9″, AMC Model 20 and Model 35
- 0.260″ diameter
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21041)
from
$252.99
Yukon 1541H alloy rear axle for Chrysler 8.75″ measuring 28″ with 30 splines and 5×4.5 bolt pattern. for use with A-Body only. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- 28″ long
- 5 x 4.5″ bolt pattern
Popular 1974 Plymouth Barracuda Drivetrains Categories
1974 Plymouth Barracuda Drivetrains
You count on your 1974 Plymouth Barracuda to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 338 Drivetrains ranging in price from $2.49 to $1,487.99, you’re sure to find everything you need for your 1974 Plymouth Barracuda.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like National, DriveWorks, and Yukon Gear. 1974 Plymouth Barracuda Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 663 extensive product reviews on 1974 Plymouth Barracuda Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.8 stars and Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1974 Plymouth Barracuda below to get started!
Top-Rated Drivetrains Brands For Your 1974 Plymouth Barracuda
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Plymouth Barracuda running right for years to come. In our inventory you’ll find brands like National, DriveWorks, Yukon Gear, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Drive Shafts and Axles and Universal Joints. All are waiting to get your 1974 Plymouth Barracuda back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1974 Plymouth Barracuda, and some of our most reviewed National parts include:
FAQs for 1974 Plymouth Barracuda Drivetrains
What are the most purchased Drivetrains for the 1974 Plymouth Barracuda?
Out of 338 Drivetrains for the 1974 Plymouth Barracuda, the most popular in our inventory are:
What are the top-rated 1974 Plymouth Barracuda Drivetrains?
Top-rated Drivetrains for your 1974 Plymouth Barracuda based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
“Fit just like the original.”
