1974 GMC K35/K3500 Pickup Performance Engines

Essential 1974 GMC K35/K3500 Pickup Performance Engines

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$85.09
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

Edelbrock – Water Pump for Small-Block Chevy in Satin Finish (Long) (Part No.8811)

Water Pump for Small-Block Chevy in Satin Finish (Long)

from

$307.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6081)

Super Intake Manifold Bolts

from

$38.99
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More

Spectre – Water Neck; Chevy 90 Degree (Part No.4933)

Water Neck; Chevy 90 Degree

from

$50.99
Spectre’s Chevrolet water neck fits Chevy V8 engines and features a 90 degree neck with a 360 degree swivel design for a custom look and fit. This water neck has been designed around the OEM specifications, has a height of 2-7/8 inches and has a polished aluminum finish for a lasting look that fits great. This water neck includes the allen bolts and sealing O-ring.

Product Features:
  • Fits Chevy V8 engines
  • 90 degree neck with a 360 degree swivel design
  • 2-7/8 inch height
  • Includes sealing O-ring and allen bolts
  • Polished aluminum finish
  • Easy to install
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2904)

PERFORMANCE REAR MAIN SEAL SET

from

$16.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1884 R)

PERFORMANCE OIL PAN GASKET SET

from

$64.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
  • Not intended for use in emission controlled vehicles.
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYD 1 EA (Part No.11-208-3)

CAMSHAFT, BBC 280 MAGNUM HYD 1 EA

from

$247.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that

Product Features:
  • Best with aftermarket torque converters and 9.5:1 compression.
  • Great high RPM power.
  • Easy on valve train parts.
  • Can be used with mild ratio rocker arms and traditional performance valve springs.
See More

Mr. Gasket – Lts Throttle Cable Brkt Chev (Part No.9885)

Lts Throttle Cable Brkt Chev

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.90)

Timing Cover Gasket Set

from

$21.99
Mr. Gasket Performance Timing Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)

Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet

from

$1009.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 64cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Mr. Gasket – Intake Gasket (Part No.143)

Intake Gasket

from

$42.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
See More

Competition Cams – CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT (Part No.CL12-206-2)

CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT

from

$323.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Mr. Gasket – Intake Bolt Kit (Part No.5004)

Intake Bolt Kit

from

$61.99
Finish your custom engine job with these show quality grade 5 chromed bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1-1/4 inch bolts and (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
  • Ideal For Street Rods/Machines
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9730)

Performer Series Retainer (Qty 16)

from

$99.99
Product Features:
  • Use W/ Valve Springs Part #5703, 5794
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Mr. Gasket – Precision Timing Tape (Part No.1589)

Precision Timing Tape

from

$17.79
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:
  • 7″ diameter
  • 1965-71, 396-427 cu. in. big block
  • 1970, 400 cu. in. small block
  • Set Valve Lash At Proper Time
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$27.49
Secure the harmonic balancer or dampener on your Chevy. Works on original equipment, high performance street, drag or circle track applications. Features a heat treated black oxide coated Grade 8 alloy steel bolt for strength with a tall hex head to prevent wrench from slipping. An extra thick parallel ground washer provides accurate, uniform torque, and a lock washer is also included.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Tall hex head bolt to prevent wrench from slipping
  • Extra thick parallel ground washer provides accurate, uniform torque
  • Washers Provides More Accurate And Uniform Torque
  • Grade 8 Alloy Steel
See More

B & M – Holeshot 2000 (Part No.20416)

Holeshot 2000

from

$369.99
HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

B & M – Holeshot 3600 (Part No.20425)

Holeshot 3600

from

$825.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
  • Dual Pattern Drive Lugs
  • New Turbine Hub
  • New Springs/Rollers In Stator
See More

Competition Cams – Engine Valve Spring Kit (Part No.911-16)

Engine Valve Spring Kit

from

$759.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757

Product Features:
  • Seat pressure: 122 lbs. @ 1.900″, Open Pressure: 309 lbs. @ 1.400″
  • O.D.: 1.524″, I.D.: 1.110″
  • Single valve springs with damper
See More

Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)

VALVE SPRINGS, 1.509" DUAL 1 ST

from

$788.99
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

Product Features:
  • Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
  • O.D.: 1.509″, I.D.: 0.697″
  • Dual valve springs with damper
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – Valve Cover Gasket Set (Part No.179)

Valve Cover Gasket Set

from

$36.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .312 inch thick. That’s substantially thicker than stock which can allow for additional valve train clearance. brbrFits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:
  • Provides Excellent Flange Sealing And Durability
  • For High-Performance Street, Drag Race & Oval Track Use
See More

Spectre – Valve Cover Gasket Steel reinforced (Part No.585)

Valve Cover Gasket Steel reinforced

from

$34.99
This Spectre valve cover gasket is an OEM replacement part that fits small block Chevrolet 265-400 engines. The gasket is made from extra thick rubber with a steel reinforced core that maintains its shape under pressure which helps to provide a superior seal.

Product Features:
  • Fits 265-400 small block Chevy engines
  • OEM replacement
  • Extra thick rubber with steel reinforced core
  • Provides a superior seal
See More

Competition Cams – Hi-Tech Roller Race Timing Set for Chevrolet 396-454 Big Block (Part No.3110)

Hi-Tech Roller Race Timing Set for Chevrolet 396-454 Big Block

from

$141.99
COMP Cams Hi-Tech Roller Race Timing Sets include cast iron camshafts gears, induction hardened billet steel crank sprockets, and pre-stretched, heat-treated double roller chains with heavy-duty large pin design. They feature 3 keyway crank sprockets for

Product Features:
  • Cast iron camshaft gear and induction hardened billet steel crank sprocket
  • Pre-stretched, heat-treated true double roller chain with heavy-duty large pin design; chain available separately
  • Ideal for all street performance and race applications
  • Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
  • Dynamically balanced and quality checked for run-out tolerances
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7800)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$62.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
  • Not for OEM Hydraulic Roller-Lifter Camshaft Eng.
See More

1974 GMC K35/K3500 Pickup Performance Engines

Maybe you’re in the middle of a full rebuild of that 1974 GMC K35/K3500 Pickup. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 115 different Performance Engines in our inventory ranging from $7.99 to $1,009.99. That means you can find the exact parts or products you need to keep that 1974 GMC K35/K3500 Pickup running smoothly.

Performance Engines are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1974 GMC K35/K3500 Pickup. Mr. Gasket, Edelbrock, and FEL-PRO Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1974 GMC K35/K3500 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 555 reviews in this category, some of the top rated parts include Action Plus Water Pumps with 3.7 stars and Performer-Link Adjustable True-Roller Timing Chain Set with 3.3 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1974 GMC K35/K3500 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1974 GMC K35/K3500 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 GMC K35/K3500 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your K35/K3500 Pickup the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular B & M Performance Engines

We carry B & M parts in our stock across Performance Torque Converters categories, plus more. For a 1974 GMC K35/K3500 Pickup, our most popular B & M Performance Engines include:
Tork Master 2400
from $339.99
(1)
Tork Master 2400
Performance Torque Converters

Top 1974 GMC K35/K3500 Pickup Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1974 GMC K35/K3500 Pickup. Popular Mr. Gasket parts include:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Ultra-Seal Intake Manifold Gasket with Silicone Beading
from $31.99
(18)
Ultra-Seal Intake Manifold Gasket with Silicone Beading
Performance Engine Intake Manifold Gaskets
Intake Manifold Bolts
from $32.09
(5)
Intake Manifold Bolts
Performance Intake Manifold Hardware

FAQs for 1974 GMC K35/K3500 Pickup Performance Engines

What are the most purchased Performance Engines for the 1974 GMC K35/K3500 Pickup?

Out of 115 Performance Engines for the 1974 GMC K35/K3500 Pickup, the most popular in our inventory are:
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
from $195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
Performance Intake Manifolds
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Lower Intake Manifold Gasket Set: 9 Piece Set
from $27.49
This product is not rated
Lower Intake Manifold Gasket Set: 9 Piece Set
Performance Engine Intake Manifold Gaskets

What are the top-rated 1974 GMC K35/K3500 Pickup Performance Engines?

Top-rated Performance Engines for your 1974 GMC K35/K3500 Pickup based on customer reviews/ratings are:
Action Plus Water Pumps
from $215.99
(3)
Action Plus Water Pumps
“I bought this item for my 1979 Camaro SBC for Street/Strip application. Water pump weighs 4 LBS less than factory, comes with its own cork gaskets. N”
Performer-Link Adjustable True-Roller Timing Chain Set
from $62.99
(3)
Performer-Link Adjustable True-Roller Timing Chain Set
“Bolted right on, instructions were spot on. Great purchase. Hard to go wrong with an Edelbrock company product”
Engine Crankshaft Seal Kit
from $21.49
(2)
Engine Crankshaft Seal Kit
“Seals properly”