1974 Ford F-100 Pickup Suspension Parts

Essential 1974 Ford F-100 Pickup Suspension Parts

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Firestone Ride-Rite – Double Bellows, 8.3"H Extended, 2.8"H Compressed, 6.6"Dia, 1/4" NPT Port, Single (Part No.6781)

Double Bellows, 8.3"H Extended, 2.8"H Compressed, 6.6"Dia, 1/4" NPT Port, Single

from

$203.99
Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:
  • Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
  • Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
  • Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
  • Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
  • Limited Lifetime Warranty
See More

Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors (Part No.2097)

Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors

from

$813.99
While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:
  • Designed To Provide Inflation Control Of Your Air Helper Springs
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

MOOG – Coil Spring Set (Part No.CC820)

Coil Spring Set

from

$168.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Energy Suspension – Bushing Kit (Part No.4.7106R)

Bushing Kit

from

$95.99
Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Maintain Proper Caster Alignment
See More

Timbren SES – Rubber Spring, Frame Mount, 6,000Lb, Aeon Hollow Rubber, With Helper Springs (Part No.FR250SDE)

Rubber Spring, Frame Mount, 6,000Lb, Aeon Hollow Rubber, With Helper Springs

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Skyjacker – Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.N8041)

Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single

from

$69.99
NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:
  • 150 PSI Pressurized Nitrogen Gas
  • Multi Stage Velocity Sensitive Valving
  • Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
  • Bonded Iron Piston For Durability And Longer Shock Life
  • Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
  • Orifice Disk For Axle Control In Any Condition
  • Red Polyurethane Bushings
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34803)

Gas-Magnum Shock Absorber

from

$56.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

MOOG – Leaf Spring Shackle Bushing (Part No.SB340)

Leaf Spring Shackle Bushing

from

$23.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Spring Bushing (Part No.RP36124)

Spring Bushing

from

$17.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

MOOG – Coil Spring Set (Part No.CC822)

Coil Spring Set

from

$188.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.CC808)

Coil Spring Set

from

$170.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Leaf Spring Shackle Bracket (Part No.K150410)

Leaf Spring Shackle Bracket

from

$179.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Rancho – RS5000 Shock Absorber (Part No.RS5117)

RS5000 Shock Absorber

from

$69.99
The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:
  • Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
  • 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
  • 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
  • Protective boot included – Protects the shock rod and oil seal
See More

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37186)

OESpectrum Light Truck Shock Absorber

from

$42.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Firestone Ride-Rite – Air Spring, Frame Mount, 3200 To 5000 Pound Leveling Capacity (Part No.2071)

Air Spring, Frame Mount, 3200 To 5000 Pound Leveling Capacity

from

$519.99
Ride-Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200 to 5,000 Pounds per set.

Product Features:
  • Level The Vehicle Front-To-Rear And Side-To-Side
  • Adjustability 5 To 100 PSI
  • Stabilize The Vehicle While Loaded
  • Maximize Vehicles Load Carrying Capacity
  • Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
See More

Skyjacker – 2In. B/Ub Kt: 66-96 Bro: F1502W (Part No.BUK2071)

2In. B/Ub Kt: 66-96 Bro: F1502W

from

$152.99
Skyjacker(R) Blocks and U bolts: Skyjacker(R) utilizes blocks and U bolts in its kits to provide rear lift. The Skyjacker(R) U bolts are e coated for corrosion resistance. These U bolts are offered in various shapes and sizes such as square, round, and semi round in lengths ranging from 1.75 Inch To 19 Inch. The blocks used in Skyjacker(R) kits are ductile iron with fixed center pins. They are also tapered to correct pinion angle and prevent driveline vibrations. Available in 1.25, 2, 3.5, 4.5 and 5 Inch. Rear block and U bolt kits are usually used to make a ‘kit’ in a Skyjacker(R) suspension lift. But a ‘kit’ could also be a combination of blocks and U bolts or Add A Leafs

Product Features:
  • Skyjacker(R) Utilizes Blocks And U Bolts In Its Kits To Provide Rear Lift
  • Skyjacker(R) U Bolts Are E Coated For Corrosion Resistance
  • These U Bolts Are Offered In Various Shapes And Sizes Such As Square, Round, And Semi Round In Lengths Ranging From 1.75 Inch To 19 Inch
  • Rear Block And U Bolt Kits Are Usually Used To Make A ‘Kit’ In A Skyjacker(R) Suspension Lift
See More

Whiteline – Shock Absorber Upper Bushing (Part No.W31408)

Shock Absorber Upper Bushing

from

$22.99
Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whiteline’s superior formulation shock bushings enhance the performance of new and used shock absorbers.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
See More

Whiteline – Shock Absorber Upper Bushing (Part No.W31487)

Shock Absorber Upper Bushing

from

$22.99
Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whiteline’s superior formulation shock bushings enhance the performance of new and used shock absorbers.

Product Features:
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Energy Suspension – C-Bushing (Part No.4.7101R)

C-Bushing

from

$60.99
Energy’s C-bushings for Ford trucks are a firmer durometer than O.E.M. rubber ones. They maintain proper caster alignment during all adverse conditions. Three degree styles are available to accommodate various vehicle lift configurations. They are available in 2, 4 and 7 degree positive caster, for stock and two height altered suspension configurations.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Maintain Proper Caster Alignment
  • Maximum Tensile Strength
See More

Energy Suspension – C-Bushing (Part No.4.7103G)

C-Bushing

from

$60.99
Energy’s C-bushings for Ford trucks are a firmer durometer than O.E.M. rubber ones. They maintain proper caster alignment during all adverse conditions. Three degree styles are available to accommodate various vehicle lift configurations. They are available in 2, 4 and 7 degree positive caster, for stock and two height altered suspension configurations.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Maintain Proper Caster Alignment
  • Maximum Tensile Strength
See More

Rare Parts – Shackle Assembly (Part No.RP35760)

Shackle Assembly

from

$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with shackle plates and bushings
  • No Squeak
  • Rubber or Heat Treated bushings
  • Restores ride height
See More

MOOG – Leaf Spring Shackle (Part No.K150411)

Leaf Spring Shackle

from

$81.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

1974 Ford F-100 Pickup Suspension Parts

You count on your 1974 Ford F-100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 78 Suspension Parts ranging in price from $12.29 to $1,217.99, you’re sure to find everything you need for your 1974 Ford F-100 Pickup.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 11 different brands like Monroe, Rancho, and Moog. 1974 Ford F-100 Pickup Suspension Parts start as low as $12.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,246 extensive product reviews on 1974 Ford F-100 Pickup Suspension Parts. Some of the top-rated Suspension Parts products we carry are RS5000 Shock Absorber with 3.9 stars and RS5000 Shock Absorber with 4.8 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1974 Ford F-100 Pickup below to get started!

Top-Rated Suspension Parts Brands For Your 1974 Ford F-100 Pickup

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Ford F-100 Pickup running right for years to come. In our inventory you’ll find brands like Monroe, Rancho, Moog, and even more.

Popular MOOG Suspension Parts

You’ll find popular MOOG brand products across Coil and Leaf Springs. All are waiting to get your 1974 Ford F-100 Pickup back on the road. Some of the top-rated MOOG products in these categories are:
Coil Spring Set
from $170.99
(1)
Coil Spring Set
Front Coil Springs

FAQs for 1974 Ford F-100 Pickup Suspension Parts

What are the most purchased Suspension Parts for the 1974 Ford F-100 Pickup?

Out of 78 Suspension Parts for the 1974 Ford F-100 Pickup, the most popular in our inventory are:
Gas-Matic Truck Shock Absorber
from $37.99
(5)
Gas-Matic Truck Shock Absorber
Front Shock and Struts
RS5000X Shock Absorber
from $85.99
(2)
RS5000X Shock Absorber
Front Shock and Struts
Gas-Magnum Shock Absorber
from $73.99
(4)
Gas-Magnum Shock Absorber
Front Shock and Struts

What are the top-rated 1974 Ford F-100 Pickup Suspension Parts?

Top-rated Suspension Parts for your 1974 Ford F-100 Pickup based on customer reviews/ratings are:
RS5000 Shock Absorber
from $66.99
(7)
RS5000 Shock Absorber
“Installed on 1988 Ford F-150. Easy to install and all parts needed were included.”
RS5000 Shock Absorber
from $68.99
(5)
RS5000 Shock Absorber
“Quality shocks. You won’t be disappointed”
Gas-Matic Truck Shock Absorber
from $42.49
(3)
Gas-Matic Truck Shock Absorber
“Awesome quality. Great price and ride!”