1974 Ford Custom Performance and Racing Products

Name: Valve Cover Gasket Set
Brand: Mr. Gasket
SKU: 276
Price: 35.99 USD

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1974 Custom. Advance Auto Parts has popular Custom parts like Performance Ignition Products, Performance Exhaust Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Custom model years including 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1975, 1976 and more. Select a category of 1974 Ford Custom Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1974 Ford Custom Performance and Racing Products Categories

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Fuel Pumps

Performance Coils

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Engine Water Pumps

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Engine Harmonic Balancers

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Points and Condensers

Performance Sway Bar Link Kits

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Brake Bleeders

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Strut Rods and Kits

Performance Engine Push Rod Guideplates

Performance Clutch Pivot Balls

Performance Wheel Bearing Dust Caps

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Engine Valve Stem Seal Sets

Performance Engine Rebuild Kits

Essential Performance and Racing Products for 1974 Ford Customs

from

$35.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$113.99

Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

Product Features:

Put And End To High Maintenance Point Ignitions
Specialized Electronic Circuitry
Stabalizes Ignition Timing From 1 To 10000 RPM
Improves Performance And Fuel Efficiency
Easy To Install With Hand Tools
Thermal Clad Based Surface Mount Construction
Utilizes Specialized Electronic Circuitry
Ignition Timing Is Stable From 1 To 10000rpm

from

$230.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with stock guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$869.99

MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.

Product Features:

Now includes built-in Rev Limiter
No CARB Exemption Order Number
Does not require an MSD Ignition Control
Built-in module produces a 7.5 amp single spark through high rpm
Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.

from

$141.99

Product Features:

Use W/ Valve Springs Part #5722, 5796
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$186.99

Product Features:

Mechanical Operation
Fuel Sending Unit Not Included
For Small-Block 289-351 Ford Engines
In Tank Mounting Type
110 GPH

from

$33.99

It’s easy to overlook the small details. For engine builders focused on the larger components like camshafts, cylinder heads and pistons, small parts are often forgotten until the final stages of engine assembly. COMP Cams Engine Finishing Kits include those often missing parts like woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics and timing cover and oil pump dowel pins that are so crucial to properly assembling your engine.

Product Features:

Includes parts such as woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics, timing cover and oil pump dowel pins
Available for various engine applications

from

$382.99

The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:

Ratchet Action Shifter
Cable Operated
Quick Installation
Accurate Shifting
Reverse Lockout Feature

from

$19.29

Distributor Condenser

from

$531.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$27.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$473.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

from

$171.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications

from

$1095.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$35.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

from

$54.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$379.99

The Edelbrock part #41603 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications and have a Black finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:

Small Block Ford 221-351W 62-95
Tall
Black Aluminum
Set Of Two

from

$212.99

Flexplt: Bb Ford 70-97 (164T)

from

$42.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
Complete with manifold end seals and distributor gasket where applicable
For OE replacement, high performance street, drag race and oval track use

from

$40.49

Brake Bleeder Screws

from

$178.99

Use the B&M Transpak to recalibrate your automatic transmission for optimum performance. With the Transpak you will be able to downshift into low at any speed, and keep it in low to any speed that you want.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required

from

$55.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Alkyd tower w/high dielectric properties lessens carbon tracking

from

$198.99

Product Features:

9.5 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$34.49

These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:

Made from HYPER-Flex Polyurethane

from

$34.49

Made from HYPER-Flex Polyurethane

from

$49.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$51.99

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

Upgrade your 1974 Ford Custom with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1974 Ford Custom, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Custom functioning at its best. At Advance Auto Parts, we offer a wide selection of 244 Performance and Racing Products for the 1974 Ford Custom, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1974 Ford Custom at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,266.99, with an average price of $259.40. Our 244 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1974 Ford Custom without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1974 Ford Custom, we stock popular OEM and aftermarket Performance and Racing Products from top names like FEL-PRO Performance, B & M, Competition Cams, and more. FEL-PRO Performance Performance and Racing Products start at just $28.99 and boast an impressive 4.2 stars average rating from customers. B & M and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $33.99, and at an average 4.1 stars rating. With 432 customer reviews and counting, our 1974 Ford Custom Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1974 Ford Custom is always ready to roll. We’re committed to providing you with everything you need to keep your Custom in top shape, all in one place. Start shopping confidently below for your 1974 Ford Custom!

Best-Selling Performance Ignition Products for 1974 Ford Customs

Enhance the driving experience in your Ford with 9 quality Performance Ignition Product components, starting at $19.29.

show more show less

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$89.99

Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:

High Performance Points and Condenser
With Integral Conductor

from

$55.99

Improved output coil for electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Alkyd tower w/high dielectric properties lessens carbon tracking

from

$113.99

Put And End To High Maintenance Point Ignitions
Specialized Electronic Circuitry
Stabalizes Ignition Timing From 1 To 10000 RPM
Improves Performance And Fuel Efficiency
Easy To Install With Hand Tools
Thermal Clad Based Surface Mount Construction
Utilizes Specialized Electronic Circuitry
Ignition Timing Is Stable From 1 To 10000rpm

from

$80.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$53.99

Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

Product Features:

Extra Thick Contact Arms
Large Radius Tungsten Contacts
High Strength Phenolic Rubbing Blocks
Prevents Points Float
Moisture-Proof Buna-N Condenser

from

$19.29

Distributor Condenser

Most Popular 1974 Ford Custom Performance Exhaust Products

Customize your Ford with 8 Performance Exhaust Products products like Performance Exhaust Manifold Gaskets, all priced under $71.99.

show more show less

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$71.99

Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

Product Features:

Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
.051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
Provides excellent sealing and durability
Conforms to and seals minor surface irregularities
For high performance street, drag race, oval track and turbocharged (extreme heat) applications

from

$45.99

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$60.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
For use with SVO square port cylinder heads
Easy Removal For Disassembly

from

$39.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$45.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$30.99

Product Features:

Designed To Match Port Openings Of Cylinder Heads
Excellent Free-Flowing Seal

from

$29.99

Product Features:

Designed To Match Port Openings Of Cylinder Heads
Excellent Free-Flowing Seal

Top Picks for 1974 Ford Custom Performance Fuel Systems

Upgrade Ford Customs with top-quality Performance Fuel Systems parts, including 9 OEM and aftermarket selections for your 1974 model.

show more show less

from

$509.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$394.99

The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$716.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$186.99

Product Features:

Mechanical Operation
Fuel Sending Unit Not Included
For Small-Block 289-351 Ford Engines
In Tank Mounting Type
110 GPH

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$437.99

The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

from

$819.99

The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

Product Features:

Gold Dichromate Finish For Extreme Off Road Environments
Single Feed Fuel Inlet For Ease Of Installation
Optimized Off-Road Calibration That Works Out-Of-The-Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
One Piece Off-Road Vent Tube Eliminates Fuel Spillover
Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
Limited Lifetime Warranty Defects In Material/Workmanship

from

$255.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 130 gph Free Flow
Shutoff Pressure Pre-Set From 7.5 To 9 PSI
Fuel Pressure Regulator Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Redesigned High Flow Valves Ensure Adequate Fuel Delivery
Inlet And Outlet Tapped For 3/8 in. NPT

from

$407.99

Product Features:

Satin Finish
4 Barrel
Annular Booster Type
Manual Choke Type
750 cfm Maximum Flow Rating

In-Demand Performance Distributors for 1974 Ford Customs

Select from 6 premium Performance Distributors parts for your 1974 Ford Custom, with prices ranging from $81.99 to $635.99.

show more show less

from

$635.99

MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.

Product Features:

Simple And Clean Installation w/Only Three Wires To Connect
Built-in module produces a 7.5 amp single spark through high rpm
Easy-to-adjust mech. advance w/supplied springs and stop bushings
Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
Maintenance-free magnetic pickup and precision reluctor
Polished steel shaft is guided by a sealed ball bearing

from

$614.99

The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:

Improved Combustion And Economy
Increased Spark Plug Life
Improved Cold Weather Starting
Maintenance Free Operation
Accurate Spark Timing
Self-Lubricating Bushings
Years Of Trouble-Free Service

from

$607.99

When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also quip-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a special gear to work with the?factory camshafts.

Product Features:

Drop in billet replacement for late model Ford TFI 5.8L dist.
Supplied w/steel gear to work w/factory roller camshafts
Factory style ignition module connector accepts factory wiring
CNC machined billet aluminum housing and billet aluminum base
QPQ coated polished steel shaft; guided by sealed ball bearings
Supplied w/Late Model Distributor Cap And Rotor
Legal to install in all 50 states

from

$158.99

A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$81.99

Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:

Replacement Distributor Gear

from

$81.99

Replacement Distributor Gear

Most Sold 1974 Ford Custom Performance Engines

Explore our best-selling Ford parts for the 1974 Custom among 180 OEM and aftermarket options starting from $7.99.

show more show less

from

$35.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$50.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
Not intended for use in emission controlled vehicles.

from

$30.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$51.99

Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
Complete with manifold end seals
For OE replacement, high performance street, drag race and oval track use
Creates Tight Leak proof Seal

from

$33.99

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$399.99

Product Features:

High Rise/Dual Plane Design For Maximum Torque
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability
Permanent Mold Casting Process
Lighter/Smoother/Better Looking
More Consistent Castings

from

$297.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$52.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$42.99

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are .187 inch thick.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$33.99

Includes parts such as woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics, timing cover and oil pump dowel pins
Available for various engine applications

from

$23.79

Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:

Chrome Plated
This Is A 45 Degree Neck
Comes With O-ring And Bolts
Has Small Hose Fitting On It

from

$386.99

New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.

Product Features:

Low Rise/Dual Plane Design For Maximum Torque
Permanent Mold Casting Process
Lighter/Smoother/Better Looking/Consistent Casting
Dyno Proven To Make 25hp Over Competition
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability

from

$23.79

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers

Product Features:

Hex Head
Zinc Plated
Ideal For Minimal Space
12-Point Head And Flange
Zinc Plated For Protection

from

$249.99

The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

from

$395.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$32.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$45.49

Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:

Heat treated black oxide coated Grade 8 alloy steel
Thick parallel ground washer provides more accurate, uniform torque
Hex Prevents Socket Slippage
Accurate And Uniform Torque
Black Plated Finish

from

$38.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$35.99

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$30.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$27.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$39.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
1970-82; w/2 Bbl. Cylinder heads
Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
Not intended for use in emission controlled vehicles.

from

$35.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

from

$24.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

Top-Rated Performance and Racing Products Brands For Your 1974 Ford Custom

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1974 Ford Customs. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, B & M, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1974 Custom start at just $28.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular FEL-PRO Performance 1974 Ford Custom Performance and Racing Products

When it comes to maintaining or upgrading your 1974 Ford Custom, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1974 Ford Custom. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $38.66. Plus, with over 6 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $35.99

(4)

Lower Intake Manifold Gasket Set: 11 Piece Set

“Great overall intake gasket!!”

from $50.99

(1)

Engine Valve Cover Gasket Set

“good”

from $28.99

(1)

Exhaust Manifold Gasket Set

“Works good no leaks on headers”

Popular B & M 1974 Ford Custom Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1974 Ford Custom owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1974 Custom, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $349.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

FAQs for 1974 Ford Custom Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1974 Ford Customs?

Out of 244 Performance and Racing Products that fit 1974 Ford Customs, the following parts are the top sellers:

Lower Intake Manifold Gasket Set: 11 Piece Set (5991277) – $35.99
Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99

What’s the price range for 1974 Ford Custom Performance and Racing Products?

Performance and Racing Product prices for the 1974 Ford Custom start at $5.99 and go up to $1,266.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1974 Ford Custom?

The average price for Performance and Racing Products for the 1974 Ford Custom is $259.40. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford Custom model years?

Yes, we currently carry Performance and Racing Products for 16 model years of Ford Customs between 1949 and 1976. Performance and Racing Products are bought most frequently for the following model years: 1976, 1975, 1973, 1972, 1971, 1970, 1969, 1968, and 1967.

What are the cheapest Performance and Racing Products for my 1974 Ford Custom?

The cheapest 1974 Ford Custom Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
High Energy 8.152" Long, 5/16" Diameter Pushrod (50289279) – $7.99
Flat 1 Piece Guide Plate for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (50288866) – $8.99

What are the top-rated Performance and Racing Products that fit the 1974 Ford Custom?

Out of 432 reviews by customers, our 1974 Ford Custom Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1974 Ford Custom and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1974 Ford Custom?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1974 Ford Custom:

Can I get help with 1974 Ford Custom Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford Custom Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford Custom Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1974 Ford Custom Performance and Racing Products

Mr. Gasket – Valve Cover Gasket Set (Part No.276)

Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)

Competition Cams – Valve Seals, Umbrella 11/32" 1 St (Part No.502-16)

MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)

Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)

Competition Cams – FINISHING KIT, SMALL BLOCK FORD 1 EA (Part No.235)

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Mallory – Distributor Condenser (Part No.401)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam (Part No.34-422-9)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)

Edelbrock – Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish (Part No.8849)

MSD Ignition – Wire Set; Super Conductor; Ford 289-302 with HEI Cap (Part No.35399)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL35-218-3)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Water Neck (Part No.2664)

Energy Suspension – Control Arm Bushing Set (Part No.4.3111R)

Edelbrock – Classic Series Valve Covers: Small Block Ford 221-351W 62-95, Black Aluminum (Part No.41603)

Hays – Flexplt: Bb Ford 70-97 (164T) (Part No.12-055)

Mr. Gasket – Intake Gasket (Part No.203G)

Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)

B & M – Transpak, 67-91 C6 Transmission (Part No.40228)

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Edelbrock – Pushrod Set for Ford 351M/400 (Part No.9633)

Energy Suspension – Strut Rod Bushing Set (Part No.4.7117R)

Energy Suspension – Strut Rod Bushing Set (Part No.4.7117G)

FEL-PRO Performance – Performance Main Seal Set (Part No.2948)

Mr. Gasket – Rear Main Seal Gasket (Part No.1965)

Mallory – Unilite Ignition Module (Part No.605)

Accel – Contact And Condenser Kit (Part No.8203)

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)

MSD Ignition – Wire Set; Street Fire; Ford 351C-460; Socket (Part No.5542)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Accel – Contact Set Hp 32 Oz (Part No.110228)

Mallory – Distributor Condenser (Part No.401)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)

Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7160)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7262)

Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7228)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)

Holley – Off Road Carbs (Part No.0-90670)

Holley – Mechanical Fuel Pump (Part No.12-460-13)

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3755401)

MSD Ignition – Distributor; Ford TFI; 351W (Part No.8453)

MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)

Mallory – Distributor Drive Gear (Part No.29420)

Mallory – Distributor Drive Gear (Part No.29421PD)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Weiand – High-Rise Dual Plane Intake Manifold for Maximum Torque (Part No.8012)

Competition Cams – Magnum 253/253 Hydraulic Flat Cam (Part No.35-331-4)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5870)

Competition Cams – FINISHING KIT, SMALL BLOCK FORD 1 EA (Part No.235)

Mr. Gasket – Water Neck (Part No.2662)

Weiand – Action +Plus; Intake Manifold (Part No.8010)

Mr. Gasket – Intake Manifold Bolts (Part No.958G)

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

Competition Cams – Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam (Part No.32-602-5)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)

Mr. Gasket – Valve Cover Gasket Set (Part No.276)