1974 Chrysler Imperial Drivetrains
More 1974 Chrysler Imperial Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1974 Chrysler Imperial, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1974 Chrysler Imperial Drivetrains
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#42) Differential (Part No.13006)
from
$359.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’42’ case
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Motive Gear – Differential Pinion Seal (Part No.5126B)
from
$9.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Powertrax – Lock Right Locker (Part No.1240-LR)
from
$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10047)
from
$142.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing with inner and outer seals (one side) for 8.75″ Chrysler. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ rear
- Includes axle bearing and inner and outer axle seals
- Services one side
Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)
from
$263.99
Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 29 spline
- Round companion flange
Motive Gear – Differential Carrier Gear Kit (Part No.C8.25BI)
Powertrax – Grip LS Traction System (Part No.LS308229)
from
$505.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Carrier Case For Chrysler 8.25", 29 Spline, 2.56 & Up, 1997 & Up Only (Part No.20011)
from
$634.99
Product Features:
See More
- Standard open carrier case
- Does not include spider gears
- Fits Chrysler 8.25″
- 29 spline only
- ABS and non-ABS compatible
Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)
from
$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Side adjuster for Chrysler 9.25″ rear
Motive Gear – Differential Carrier Gear Kit (Part No.C7.25BI)
Dorman – Differential Pinion Yoke Assembly (Part No.697-541)
from
$231.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25" (Part No.33278)
from
$98.99
Six piece side gear thrust washer kit for Chrysler 8″ and 9.25″.
Product Features:
See More
Product Features:
- Side gear thrust washer kit
- Fits Chrysler 8″ and 9.25″
Yukon Gear – Ring Gear Bolt For Chrysler 9.25" Rear (Part No.33033)
from
$9.99
Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Chrysler 9.25″ rear
Yukon Gear – Set Up Bearing (Part No.56041)
from
$152.99
Set-up bearing (one bearing). HM803149. No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits HM803149 pinion bearing
- Easily slips on and off pinion journal to allow for pinion depth adjustment
Yukon Gear – Steel Cover For Chrysler 9.25" Rear (Part No.32314)
Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7260 U/Joint Size (Part No.41003)
from
$279.99
Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 7.25″ and 8.25″
- 27 spline
- 7260 u-joint size
- Inside snap ring design
- 2.125″ snap ring span
- 1.078″ cap diameter
- Strap style
Dorman – Differential Ring And Pinion Set (Part No.697-310)
from
$208.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
- Effective fix – eliminates grinding and whining from failed original bearings
- Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
- Trustworthy quality – backed by team of designers and engineers in the United States
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Tapered Roller Bearing (Part No.S-JLM-704610)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Motive Gear – Differential Gear Install Kit (Part No.C8.75IKL)
Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)
from
$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chrysler 9.25″
- Standard open carrier only
- Notched
Yukon Gear – Pinion Nut (Part No.33142)
from
$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.
Product Features:
See More
Product Features:
- Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
- 7/8″ x 14 thread
Yukon Gear – Carrier Installation Kit For Chrysler 9.25" Rear Differential (Part No.57001)
from
$173.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Chrysler 9.25″ rear differential. This kit contains carrier bearings and races.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- Includes carrier bearings and races
Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)
from
$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Popular 1974 Chrysler Imperial Drivetrains Categories
1974 Chrysler Imperial Drivetrains
You count on your 1974 Chrysler Imperial to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 201 Drivetrains ranging in price from $1.99 to $883.99, you’re sure to find everything you need for your 1974 Chrysler Imperial.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like National, Felpro, and Yukon Gear. 1974 Chrysler Imperial Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 442 extensive product reviews on 1974 Chrysler Imperial Drivetrains. Some of the top-rated Drivetrains products we carry are Axle Repair Bearing with 2.5 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1974 Chrysler Imperial below to get started!
Top-Rated Drivetrains Brands For Your 1974 Chrysler Imperial
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Chrysler Imperial running right for years to come. In our inventory you’ll find brands like National, Felpro, Yukon Gear, and even more.
Popular Yukon Gear Drivetrains
You’ll find popular Yukon Gear brand products across Differentials. All are waiting to get your 1974 Chrysler Imperial back on the road. Some of the top-rated Yukon Gear products in these categories are:
Top-Rated Felpro Drivetrains
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Drivetrains for your 1974 Chrysler Imperial, and some of our most reviewed Felpro parts include:
FAQs for 1974 Chrysler Imperial Drivetrains
What are the most purchased Drivetrains for the 1974 Chrysler Imperial?
Out of 201 Drivetrains for the 1974 Chrysler Imperial, the most popular in our inventory are:
What are the top-rated 1974 Chrysler Imperial Drivetrains?
Top-rated Drivetrains for your 1974 Chrysler Imperial based on customer reviews/ratings are:
