1973 Honda Civic Car Parts & Accessories

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4″ x 11″ x 7-1/2″
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 6″
• Sub-compact to compact cars
• GVWR up to 18,000 lbs.
• Compatible with OEM cooler systems

Product Features:

• Imperial mounting kit system
• For installation of transmission coolers and electric fans
• Provides quick, effective installation of Imperial products
• Contains nylon mounting rods, foam pads and locking buttons
• Atermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 15-7/8″
• Compact and mid-size cars
• GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 12-1/2″
• Sub-compact to compact cars
• GVWR up to 12,000 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 9-1/2″
• Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
• GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
• 33% more efficient than a comparable tube and fin design

Product Features:

• Mid-size and full-size cars, pickups
• GVWR up to 18,000 lbs.; towing up to 3,500 lbs
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

Product Features:

• Brand may vary by location

Product Features:

• Brand may vary by location

The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.

Converter Housing Seal

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Oil Drain Plug Gasket

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations.

Product Features:

• OE Quality
• Direct fit application
• Noise and vibration reduction technology reduces gear noise providing a quite smooth ride
• Wide angle damper design enables the clutch disc to hold more torque with less force
• Quiet pre-damper mechanism reduces gear noise during engine idle

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

FLYWHEEL SHIM

The INA pilot bearing is manufactured in accordance to strict OEM specifications for performance and durability.

Product Features:

• OE Quality and direct fit application
• Original Equipment Supplier
• Sealed for life with high performance, application-specific grease
• High axial load carrying capacity

Product Features:

• Brand may vary by location

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

• Easy to install
• Will fit many custom applications
• Low cost alternative

This brake pedal stop pad is designed to match the fit and function of the original pad on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this brake pedal stop pad is designed to match the fit and function of the original pad on specified vehicles
• Restores functionality – reliable replacement for an original pad that is missing, cracked or damaged from wear
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

• Use To Install All Classic, Challenger Or Signature Series Wheels
• Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig
• Use with all Grant Classic/Challenger/Signature Steering Wheels

Original equipment replacement horn that delivers a powerful 130 dB of sound that ensures you’ll be heard over surrounding noise! This horn features high durability, water & corrosion resistant steel housing. The HK 9 disc horn that meets or exceeds SAE & O.E.M. specifications for a wide range of cars, trucks & motorcycles. Quick & Easy installation kit included. Features high durability, water & corrosion resistant steel housing with aluminium tone disc and universal mounting bracket. 12V, 130 dB @ 4″

Accelerator Pedal St

The MTC Clutch Pedal Stop Pad is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications