1973 Ford M-400 Performance and Racing Products
Find Your Specific 1973 Ford M-400 Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1973 M-400. Advance Auto Parts has popular M-400 parts like Performance Transmissions, Performance Distributors, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other M-400 model years including
1971
1972 and more. Select a category of 1973 Ford M-400 Performance and Racing Products below and start saving instantly.
Popular 1973 Ford M-400 Performance and Racing Products Categories
Essential Performance and Racing Products for 1973 Ford M-400s
B & M – Holeshot 2400 (Part No.40412)
from
$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
MSD Ignition – Distributor; Ford FE; Ready-to-Run (Part No.8595)
from
$620.99
MSD is excited to offer two Ready-to-Run distributors for two classic Ford engines! These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run distributors is their simple installation! All you need to do is connect three wires and you’ll be cruising!
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)
from
$77.99
The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Mr. Gasket – Valve Cover (Part No.9412)
from
$99.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Edelbrock – Classic Series Valve Covers: Ford FE V8 1958-76, Polished Aluminum, Set Of 2 (Part No.4162)
from
$465.99
The Edelbrock #4162 Classic Series Valve Covers are designed for Ford FE V8 1958-1976 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Ford FE V8 1958-76
- Tall
- Polished Aluminum
- Set Of Two
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Distributor Wiring Harness (Part No.29349)
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Upgrade your 1973 Ford M-400 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1973 Ford M-400, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your M-400 functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Performance and Racing Products for the 1973 Ford M-400, designed to meet your needs without breaking the bank.
From
Performance Transmission
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1973 Ford M-400 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $33.99 to $823.99, with
an average price of $275.66.
Our 8 Performance and Racing Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1973 Ford M-400 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1973 Ford M-400, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Competition Cams, and more.
Competition Cams Performance and Racing Products
start at just $33.99 and boast an impressive 4.1 stars average rating from customers.
With 4 customer reviews and counting, our 1973 Ford M-400 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1973 Ford M-400 is always ready to roll. We’re committed to providing you with everything you need to keep your M-400 in top shape, all in one place.
Start shopping confidently below for your 1973 Ford M-400!
Best-Selling Performance Transmissions for 1973 Ford M-400s
Enhance the driving experience in your Ford with 1 quality Performance Transmission components, starting at $77.99.
B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)
from
$77.99
The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Most Popular 1973 Ford M-400 Performance Distributors
Customize your Ford with 1 Performance Distributors products
like Performance Distributors, all
priced under $620.99.
MSD Ignition – Distributor; Ford FE; Ready-to-Run (Part No.8595)
from
$620.99
MSD is excited to offer two Ready-to-Run distributors for two classic Ford engines! These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run distributors is their simple installation! All you need to do is connect three wires and you’ll be cruising!
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
Top Picks for 1973 Ford M-400 Performance Ignition Products
Upgrade Ford M-400s with top-quality Performance Ignition Products parts, including 1 OEM and aftermarket selections for your 1973 model.
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
In-Demand Performance Engines for 1973 Ford M-400s
Select from 2 premium Performance Engines parts for your 1973 Ford M-400, with prices ranging from $33.99 to $823.99.
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
B & M – Holeshot 2400 (Part No.40412)
from
$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Most Sold 1973 Ford M-400 Performance Valve Covers
Explore our best-selling Ford parts for the 1973 M-400 among 2 OEM and aftermarket options starting from $99.99.
Mr. Gasket – Valve Cover (Part No.9412)
from
$99.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Edelbrock – Classic Series Valve Covers: Ford FE V8 1958-76, Polished Aluminum, Set Of 2 (Part No.4162)
from
$465.99
The Edelbrock #4162 Classic Series Valve Covers are designed for Ford FE V8 1958-1976 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Ford FE V8 1958-76
- Tall
- Polished Aluminum
- Set Of Two
Top-Rated Performance and Racing Products Brands For Your 1973 Ford M-400
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1973 Ford M-400s. Below you’ll find some of our best rated Performance and Racing Products from Competition Cams, and more. Performance and Racing Products from these brands that fit a 1973 M-400 start at just $33.99 and are rated as high as 4.1 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Competition Cams 1973 Ford M-400 Performance and Racing Products
When it comes to maintaining or upgrading your 1973 Ford M-400, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Competition Cams ticks all of those boxes. We offer a wide selection of Competition Cams Performance and Racing Products, specifically designed for the 1973 Ford M-400. With over 1 Competition Cams brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.99. Plus, with over 1 customer reviews and an average rating of 4.1 stars, you can trust that our Competition Cams Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1973 Ford M-400 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1973 Ford M-400s?
Out of 8 Performance and Racing Products that fit 1973 Ford M-400s, the following parts are the top sellers:
- Thermocap Radiator Cap (10648773) – $54.99
- Valve Cover (17360596) – $99.99
- Distributor; Ford FE; Ready-to-Run (22360329) – $620.99
What’s the price range for 1973 Ford M-400 Performance and Racing Products?
Performance and Racing Product prices for the 1973 Ford M-400 start at $33.99 and go up to $823.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1973 Ford M-400?
The average price for Performance and Racing Products for the 1973 Ford M-400 is $275.66. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford M-400 model years?
What are the cheapest Performance and Racing Products for my 1973 Ford M-400?
The cheapest 1973 Ford M-400 Performance and Racing Products we carry in stock are:
- VALVE SEALS, TEFLON 3/8" 1 ST (10214807) – $33.99
- Thermocap Radiator Cap (10648773) – $54.99
- Shift Improver Kit, 67-91 C6 Transmission (6121217) – $77.99
- Valve Cover (17360596) – $99.99
- Promaster Classic Series; Ignition Coil (17350082) – $199.99
What are the top-rated Performance and Racing Products that fit the 1973 Ford M-400?
Out of 4 reviews by customers, our 1973 Ford M-400 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1973 Ford M-400 and their top-rated products:
- Performance Engines
- VALVE SEALS, TEFLON 3/8" 1 ST (10214807) – $33.99
What types of Performance and Racing Products do you sell for my 1973 Ford M-400?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1973 Ford M-400:
Can I get help with 1973 Ford M-400 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford M-400 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford M-400 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
