1972 Pontiac Ventura Cooling and Climate Controls

Essential 1972 Pontiac Ventura Cooling and Climate Controls

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle (Part No.902-1017)

Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle

from

$21.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1045)

Temperature Sender With Gauge

from

$15.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Factory Air – Reman GM Frigidaire/Harrison A6 Clutch Assembly w/ Coil (Part No.48284)

Reman GM Frigidaire/Harrison A6 Clutch Assembly w/ Coil

from

$119.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • All pulleys and hubs are machined and trued to ensure an even surface
  • Twelve point hub weld
  • Coated to prevent corrosion
See More

Felpro – Engine Water Pump Gasket (Part No.35059)

Engine Water Pump Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Help – Drain Cock-Brass-Screw In Style-3/8 In. NPT (Part No.61102)

Drain Cock-Brass-Screw In Style-3/8 In. NPT

from

$7.79
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

KAI – Rad Mount Bushing (Part No.GMK4012326682S)

Rad Mount Bushing

from

$22.99
New Goodmark 4 Piece Set Of Radiator Mount Cushions, For Models With 4 Row Radiators

Product Features:
  • For Models With 4 Row Radiators
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)

Engine Coolant Temperature Sending Unit Switch Connector

from

$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed for the OE distributor as a direct replacement part
See More

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14556)

Belt-Driven Fan Spacer Kit

from

$22.99
Belt-Driven Fan Spacer Kit

Carquest Premium – HVAC Vacuum Closed Non-Bypass Heater Valve (Part No.T74610)

HVAC Vacuum Closed Non-Bypass Heater Valve

from

$35.49
Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.
See More

ARP Auto Racing – For Use With All V8 Chevy, Hex Style Head Type, Black Oxide, Chrome Moly (Part No.130-3202)

For Use With All V8 Chevy, Hex Style Head Type, Black Oxide, Chrome Moly

from

$17.99
ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so that is why ARP came up with these super tough bolts. The stainless has the added advantage of being rust and corrosion resistant. it is the fastener of choice.

Product Features:
  • Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Made In USA
  • Sold As A Kit
See More

Factory Air – 12" Reversible Fan Kit (Part No.36896)

12" Reversible Fan Kit

from

$141.99
880 CFM
See More

Carquest Premium – Heater Core (Part No.399087)

Heater Core

from

$63.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Thermocap Radiator Cap

from

$47.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:
  • Indicates Coolant Temperature
  • Helps to Prevent Injuries from coolant or steam burns
  • Integrated Coolant Reclamation Valve
  • Improves Underhood Appearance
  • Fahrenheit and centigrade readings
  • Various valve pressures available
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

MAHLE Original – ADHESIVE WTR OUT (Part No.C24109)

ADHESIVE WTR OUT

from

$1.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Motorad UltraStats – Thermostat: 195 Degrees (Part No.5200-195)

Thermostat: 195 Degrees

from

$18.29
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:
  • Heavy gauge stainless steel components offer increased reliability and long-lasting durability
  • Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
  • Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
  • AccuSpring Design for stable temperature control and increased cabin comfort
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Felpro – WATER PUMP MOUNTING GASKET SET (Part No.ES 73030)

WATER PUMP MOUNTING GASKET SET

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – A/C New; w/ Clutch; w/ A6 Compressor (Part No.T58096)

A/C New; w/ Clutch; w/ A6 Compressor

from

$408.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – Green Round O-Ring (Part No.24623)

Green Round O-Ring

from

$1.49
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10236)

Engine Coolant Reservoir Cap

from

$9.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – A/C Accumulator Tank (Part No.T33205)

A/C Accumulator Tank

from

$33.49
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAC1537)

Multi Purpose Relay

from

$15.79
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

1972 Pontiac Ventura Cooling and Climate Controls

You count on your 1972 Pontiac Ventura to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 115 Cooling and Climate Controls ranging in price from $1.49 to $569.99, you’re sure to find everything you need for your 1972 Pontiac Ventura.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 20 different brands like Carquest Premium, Permatex, and Felpro. 1972 Pontiac Ventura Cooling and Climate Controls start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 6,410 extensive product reviews on 1972 Pontiac Ventura Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Coolant Outlet Gasket with 4.8 stars and Electric Fan – 12" Diameter with 3.5 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1972 Pontiac Ventura below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1972 Pontiac Ventura

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 Pontiac Ventura running right for years to come. In our inventory you’ll find brands like Carquest Premium, Permatex, Felpro, and even more.

Popular Flex A Lite Cooling and Climate Controls

You’ll find popular Flex A Lite brand products across Engine Cooling Parts. All are waiting to get your 1972 Pontiac Ventura back on the road. Some of the top-rated Flex A Lite products in these categories are:
Belt-Driven Fan Spacer Kit
from $22.99
(1)
Belt-Driven Fan Spacer Kit
Radiator Fan Spacers

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1972 Pontiac Ventura, and some of our most reviewed Carquest Premium parts include:
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
Radiator Cap: 16 PSI
from $9.79
(103)
Radiator Cap: 16 PSI
Radiator Caps
Radiator Cap: 16 PSI
from $13.49
(65)
Radiator Cap: 16 PSI
Coolant Reservoir Caps

FAQs for 1972 Pontiac Ventura Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1972 Pontiac Ventura?

Out of 115 Cooling and Climate Controls for the 1972 Pontiac Ventura, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated 1972 Pontiac Ventura Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1972 Pontiac Ventura based on customer reviews/ratings are:
Engine Coolant Outlet Gasket
from $3.99
(100)
Engine Coolant Outlet Gasket
“Perfect fit”
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Standard Thermostat: 180 Degrees
from $9.99
(36)
Standard Thermostat: 180 Degrees
“It worked as it should.”