1972 Oldsmobile Cutlass Steering and Chassis Parts
Find Your Specific 1972 Oldsmobile Cutlass Steering and Chassis Parts
Below you will find various in-demand Oldsmobile Steering and Chassis Parts, components and accessories for your 1972 Cutlass. Advance Auto Parts has popular Cutlass parts like Power Steering Parts, Tie Rods, Gear Boxes and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Cutlass model years including
1979,
1980,
1981,
1982,
1983,
1988,
1997,
1998,
1999 and more. Select a category of 1972 Oldsmobile Cutlass Steering and Chassis Parts below and start saving instantly.
Popular 1972 Oldsmobile Cutlass Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 1972 Oldsmobile Cutlasses
Lares – New Steering Coupling Assembly (Part No.200)
from
$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
Lares – PS PUMP-NEW (Part No.12017)
from
$252.99
PS PUMP-NEW
National – Multi-Purpose Seal (Part No.474131)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
MOOG – Alignment Caster / Camber Shim (Part No.K100189)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Rare Parts – Ball Joint (Part No.RP10410)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-423)
from
$10.49
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
National – Multi-Purpose Seal (Part No.313842)
from
$13.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Lares – Remanufactured Power Steering Gear Box (Part No.970)
from
$356.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Dorman – Help – GM Power Steering Cap (Part No.82605)
from
$25.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
National – Multi-Purpose Seal (Part No.351267)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)
from
$15.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6649)
from
$23.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)
from
$40.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$29.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Idler Arm (Part No.RP20267)
from
$74.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
National – Bearing Race (Part No.M804010)
from
$22.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Power Steering Return Hose Assembly, 3/8" Male Inv. Flare x 3/8" I.D. Hose (Part No.36364)
from
$45.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Rare Parts – Center Link (Part No.RP25953)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Forged steel
- Heat treated components
- Improves steering response
Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)
from
$18.99
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Rare Parts – Pitman Arm (Part No.RP21031)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
National – Multi-Purpose Seal (Part No.7013S)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Lares – New Steering Coupling Assembly (Part No.201)
from
$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
MOOG – Steering Tie Rod End (Part No.ES314RL)
from
$68.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Powercraft – Pump Seal Kit (Part No.8755)
from
$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)
from
$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Upgrade your 1972 Oldsmobile Cutlass with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 1972 Oldsmobile Cutlass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Cutlass functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Steering and Chassis Parts for the 1972 Oldsmobile Cutlass, designed to meet your needs without breaking the bank.
From
Power Steering Part
replacements to
Tie Rods
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1972 Oldsmobile Cutlass at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $3.29 to $868.99, with
an average price of $101.58.
Our 89 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1972 Oldsmobile Cutlass without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Oldsmobile Cutlass, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog, Carquest Premium, National, and more.
Moog Steering and Chassis Parts
start at just $12.49 and boast an impressive 4.5 stars average rating from customers.
Carquest Premium and National also bring quality to the table, with Steering and Chassis Parts available starting at $11.99, and at an average 4.4 stars rating.
With 11,900 customer reviews and counting, our 1972 Oldsmobile Cutlass Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1972 Oldsmobile Cutlass is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass in top shape, all in one place.
Start shopping confidently below for your 1972 Oldsmobile Cutlass!
Best-Selling Power Steering Parts for 1972 Oldsmobile Cutlasses
Enhance the driving experience in your Oldsmobile with 27 quality Power Steering Part components, starting at $3.29.
National – Bearing Race (Part No.M802011)
from
$14.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-0058F)
from
$50.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$39.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$32.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$29.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Help – Power Steering Cap (Part No.82581)
from
$6.49
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Quick Connect Coupler (Part No.240250)
from
$7.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
- Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
- Compatible with OEM cooler systems
- Made of brass
- Quality construction
Carquest Premium – 3/8" ID Return Hose (J189) (Sold by foot) (Part No.35001)
from
$8.79
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – 3/8" ID Return Hose (Sold by each) (Part No.34995)
from
$3.29
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Cardone – Power Steering Filter (Part No.20-P038F)
from
$35.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Remanufactured Power Steering Pump (Part No.20-140)
from
$98.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100 percent tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Carquest Premium – Power Steering Return Hose Assembly, 3/8" Male Inv. Flare x 3/8" I.D. Hose (Part No.35325)
from
$79.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)
from
$52.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$34.99
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Lares – Remanufactured Power Steering Pump (Part No.2009)
from
$112.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Lares – PS PUMP-NEW (Part No.12120)
from
$225.99
PS PUMP-NEW
Lares – PS PUMP-NEW (Part No.12009)
from
$168.99
PS PUMP-NEW
Lares – Remanufactured Power Steering Pump (Part No.2120)
from
$136.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)
from
$91.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
- Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures
Most Popular 1972 Oldsmobile Cutlass Tie Rods
Customize your Oldsmobile with 6 Tie Rods products
like Tie Rod Ends,
Tie Rod End Sleeves, and
Tie Rod End Boots, all
priced under $96.99.
MOOG – Steering Tie Rod End (Part No.ES406R)
from
$96.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)
from
$18.99
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)
from
$27.99
Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Hex formed studs and/or wrench flats for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Inner tie rod ends are supplied with thread locking compound
- Hardware included for easier installation (where applicable)
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Steering Tie Rod End (Part No.ES406L)
from
$91.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT: Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Rare Parts – Tie Rod End (Part No.RP25526)
from
$67.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Top Picks for 1972 Oldsmobile Cutlass Gear Boxes
Upgrade Oldsmobile Cutlasses with top-quality Gear Boxes parts, including 13 OEM and aftermarket selections for your 1972 model.
Lares – Remanufactured Manual Steering Gear Box (Part No.1275)
from
$269.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Cardone – Remanufactured Steering Gear (Part No.27-6537)
from
$201.99
The steering gear box is the heart of the vehicle’s steering system. It guides the wheels’ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
- 100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
- All critical components are tested to ensure product reliability.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
- Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Powercraft – Steering Gear Major Seal Kit (Part No.7860)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
National – Multi-Purpose Seal (Part No.351267)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Lares – New Power Steering Gear Box (Part No.10970)
from
$619.99
New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.
See More
Lares – Remanufactured Power Steering Gear Box (Part No.972)
from
$494.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
PWR – New Power Steering Gear (Part No.61-5770)
from
$868.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Power Steering Gear Boxes are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- PWR does not consolidate turn ratios, ensuring OE quality replacement performance
- Includes: NEW housings, internal components, ball bearings, shafts, bushings, and are precision machined and matched for optimum performance and duarability
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Input and Output Shaft Spilne Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a New Output Shaft Nut and all required Installation Seals and Washers
Edelmann – Factory New Power Steering Gear (Part No.3025)
from
$746.99
Edelmann Elite power steering gears represent a step up in quality and performance over typical aftermarket brand power steering gears and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each gear is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every gear has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.
Product Features:
See More
Product Features:
- Every component is 100% completely new, never reused
- Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
- Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
- Includes necessary hardware where applicable (o-ring, washers, etc…)
- U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance
Lares – PS GEAR-NEW (Part No.10972)
from
$623.99
PS GEAR-NEW
Lares – PS GEAR BOX-RMFD (Part No.974)
from
$553.99
PS GEAR BOX-RMFD
Lares – MAN STG GEAR BX-NEW (Part No.11472)
from
$452.99
MAN STG GEAR BX-NEW
Lares – Manual Steering Gear Box (Part No.11276)
from
$424.99
Manual Steering Gear Box
Lares – Remanufactured Power Steering Gear Box (Part No.970)
from
$356.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
In-Demand Sway Bars for 1972 Oldsmobile Cutlasses
Select from 16 premium Sway Bars parts for your 1972 Oldsmobile Cutlass, with prices ranging from $8.79 to $32.99.
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K8266)
from
$12.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K700535)
from
$22.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- The Grade 8 coated bolt makes the link extremely durable
- Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
- Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
- Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
- Black phosphate barrel nut and washers provide corrosion protection.
Driveworks – Sway Bar Link Kit (Part No.DW-K8266)
from
$11.99
Driveworks sway bar link kits are made to meet or exceed OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks chassis parts help ensure improved steering response and durability.
See More
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K5253)
from
$13.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K5241)
from
$8.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Rare Parts – Sway Bar Link Kit (Part No.RP15645)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Energy Suspension – SwyBarLink (Part No.9.8165R)
from
$30.49
SwyBarLink
Rare Parts – Sway Bar Link Kit (Part No.RP22197)
from
$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Energy Suspension – SwyBarLink 1 EA ENRGY (Part No.9.8165G)
from
$30.49
SwyBarLink 1 EA ENRGY
Rare Parts – Sway Bar Bushing (Part No.RP15791)
from
$21.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Bushing (Part No.RP15311)
from
$30.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – SWAY BAR BUSHING (Part No.RP15269)
from
$20.99
SWAY BAR BUSHING
Rare Parts – Sway Bar Bushing (Part No.RP18028)
from
$19.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link Kit (Part No.RP15742)
from
$15.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-425)
from
$13.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-423)
from
$10.49
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Most Sold 1972 Oldsmobile Cutlass Ball Joints
Explore our best-selling Oldsmobile parts for the 1972 Cutlass among 7 OEM and aftermarket options starting from $10.49.
MOOG – Suspension Ball Joint (Part No.K5108)
from
$46.49
Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
MOOG – Suspension Ball Joint (Part No.K5103)
from
$53.99
Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Driveworks – Ball Joint (Part No.DW-K5103)
from
$35.99
Product Features:
See More
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Driveworks – Ball Joint (Part No.DW-K5108)
from
$29.99
Product Features:
See More
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13125R)
from
$10.49
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Rare Parts – Ball Joint (Part No.RP10307)
from
$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP10403)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Top-Rated Steering and Chassis Parts Brands For Your 1972 Oldsmobile Cutlass
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1972 Oldsmobile Cutlasses. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and National, and more. Steering and Chassis Parts from these brands that fit a 1972 Cutlass start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 1972 Oldsmobile Cutlass Steering and Chassis Parts
When it comes to maintaining or upgrading your 1972 Oldsmobile Cutlass, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1972 Oldsmobile Cutlass. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $32.32. Plus, with over 18 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 1972 Oldsmobile Cutlass Steering and Chassis Parts
Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1972 Oldsmobile Cutlass owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1972 Cutlass, Advance Auto Parts carries a full inventory of 2 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $39.99 to $46.99, plus, with more than 18 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 1972 Oldsmobile Cutlass Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 1972 Oldsmobile Cutlasses?
Out of 89 Steering and Chassis Parts that fit 1972 Oldsmobile Cutlasses, the following parts are the top sellers:
- 3/8" ID Return Hose (J189) (Sold by foot) (5190122) – $8.79
- New Power Steering Filter (10417593) – $32.99
- Steering Tie Rod End Adjusting Sleeve (15510347) – $18.99
What’s the price range for 1972 Oldsmobile Cutlass Steering and Chassis Parts?
Steering and Chassis Part prices for the 1972 Oldsmobile Cutlass start at $3.29 and go up to $868.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 1972 Oldsmobile Cutlass?
The average price for Steering and Chassis Parts for the 1972 Oldsmobile Cutlass is $101.58. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Oldsmobile Cutlass model years?
What are the cheapest Steering and Chassis Parts for my 1972 Oldsmobile Cutlass?
The cheapest 1972 Oldsmobile Cutlass Steering and Chassis Parts we carry in stock are:
- 3/8" ID Return Hose (Sold by each) (18070570) – $3.29
- Tie Rod Dust Boot (22906874) – $6.29
- Power Steering Cap (6090435) – $6.49
- Quick Connect Coupler (15230008) – $7.99
- 3/8" ID Return Hose (J189) (Sold by foot) (5190122) – $8.79
What are the top-rated Steering and Chassis Parts that fit the 1972 Oldsmobile Cutlass?
Out of 11,900 reviews by customers, our 1972 Oldsmobile Cutlass Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1972 Oldsmobile Cutlass and their top-rated products:
- Steering Hardware
- Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
- Steering Center Link (20973543) – $96.99
- New Steering Coupling Assembly (18340126) – $52.99
- Sway Bars
- Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
- Steering Center Link (20973543) – $96.99
- New Steering Coupling Assembly (18340126) – $52.99
- Tie Rods
- Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
- Steering Center Link (20973543) – $96.99
- New Steering Coupling Assembly (18340126) – $52.99
What types of Steering and Chassis Parts do you sell for my 1972 Oldsmobile Cutlass?
As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 1972 Oldsmobile Cutlass:
Can I get help with 1972 Oldsmobile Cutlass Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Steering and Chassis Parts and more.
What is your return policy for Oldsmobile Cutlass Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
