1972 Oldsmobile Custom Cruiser Performance Engines
More 1972 Oldsmobile Custom Cruiser Performance Engines
Find your specific 1972 Oldsmobile Custom Cruiser original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1972 Oldsmobile Custom Cruiser Performance Engines
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$717.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Spectre – Aluminum Flywheel Dust Shield (Part No.5462)
from
$81.99
Spectre’s transmission cover for Chevy and GM TH350 transmissions is a great looking cover to help protect your flex plate while on the road. This cover is designed to fit GM and Chevy engines that have the starter on the passenger side. It has a 3-7/8 inch start slot to accommodate the majority of starters. This cover will not work on Pontiac or Oldsmobile engines.
Product Features:
See More
Product Features:
- Polished aluminum
- For GM TH350 transmissions
- For Chevy and GM engines with the starter on the passenger side
- Has a 3-7/8 inch starter slot
- Does not fit Pontiac or Oldsmobile engines
- Easy to install with no special tools or skills required
B & M – Traveler Converter (Part No.30423)
from
$375.99
Torque Converter – Traveler Converter (SUV and Light Truck) for GM 1968 to 1981 TH350, TH375B APPLICATION: GM 1968 to 1981 TH350, TH375B (6) (will not fit TH-350C) Provides slightly higher stall speed than stock to improve pulling power at low speeds. New
Product Features:
See More
Product Features:
- Ideal For Motor Homes
- Ideal For Towing Applications
- Precision Pump Drive Tube
- Heavy Duty Needle Bearings
- Furnace Brazed
Edelbrock – Performer Series; Intake Manifold (Part No.37011)
from
$513.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes and Accepts EGR
Edelbrock – Street Tunnel Ram; Intake Manifold Base (Part No.7067)
from
$385.99
Intake manifold base only. Match with top. For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine. For PN(7115). Not for sale or use on pollution controlled motor vehicles.
Product Features:
See More
Product Features:
- Base Only-See PN[7110] for Complete or TopPN[7032]
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- HEI Ignition Will Not Clear Manifold
- For Street Machines; Street Rods; Pro-Street;
- Good Choice for High-Performance Boats Also
- Not for 1987 and later Cast Iron Heads
Edelbrock – Performer Olds 350 Intake Manifold for 307-330-350-403 Small-Block Oldsmobile (Part No.2711)
from
$473.99
Edelbrock part #2711 Performer Oldsmobile 350 intake manifold is designed for 1964-85, 307-330-350-403 c.i.d. Oldsmobile V8 applications. For non-EGR, the #2711 manifold comes with a universal pad to fit most carburetors with electric chokes. Will fit 198
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Satin Finish
- Non-EGR
Edelbrock – Side-Mount Throttle Linkage for S/B Chevy #7110 Street Tunnel Ram Manifold (Part No.7071)
from
$213.99
Throttle linkage kit for street tunnel ram. Use for sideways mounted carburetors only. Use Holley PN(0-9776) for sideways mounted applications. Not legal for sale or use on pollution controlled motor vehicles.
Product Features:
See More
Product Features:
- Throttle Linkage Kit for Street Tunnel Ram
- Use for Sideways Mounted Carburetors Only
- Use Holley PN[0-9776] For Sideways Mount Apps
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1356)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Spectre – In Gasket Comp Sb Chev S (Part No.400)
from
$34.49
The K&N PreCharger® filter wrap is specially designed to extend the service interval of your K&N Filtercharger filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The PreCharger will stop small dirt particles with minimal restriction to the airflow of the filter.
Product Features:
See More
Product Features:
- Cellulose nitrile composition
- Silicone beading on both sides
- Create a leak proof seal
- Double beaded, includes EGR restrictor plate
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 12 Piece Set (Part No.1233)
from
$34.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – GSKT INTAKE (Part No.5812)
from
$46.99
GSKT INTAKE
Edelbrock – TIMING CHAIN (Part No.7844)
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7813)
from
$97.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
Edelbrock – Performer-Plus Camshaft Kit for Pontiac 350-403 V8 (Part No.2157)
from
$358.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)
from
$334.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Oldsmobile 400-425-455 V8 (Part No.2152)
from
$359.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1016)
from
$67.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Head Gasket (Part No.1134G)
from
$56.99
With the ever-increasing technology in performance and racing engines, supercharged, turbo charged, nitrous-oxide and extreme compression ratios, a demand was created for stronger, more durable engine gaskets. Mr. Gasket, the originator of high performance gaskets, has met the challenge and developed performance gaskets in a variety of materials for all applications to meet the sealing demands of these engines. Mr. Gasket engine gaskets are the most advanced, tested and proven in the performance market today and earned the respect of many professional and sportsman racers.
Product Features:
See More
Product Features:
- Steel shimmed for perfect sealing
- Increases engine compression
- High temp silicone coated to prevent leaks
- Stress formed embossments
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1155)
from
$76.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Weiand – Supercharger Remote Thermostat Housing (Part No.7134P)
Spectre – Water Neck; Chevy Late Model (Part No.4730)
from
$23.79
Spectre’s Chevrolet late model water neck offers the normal angled water neck and a 1/2 inch NPT threaded hole for a by-pass hose. This water neck has a chrome plated finish for a lasting look great and includes the bolts.
Product Features:
See More
Product Features:
- Fits Chevy engines
- Includes a 1/2 inch NPT threaded hole for by-pass hose
- Includes bolts
- Chrome plated
- Easy to install
- O-ring/gasket not included
Weiand – Emission System Water Outlet (Part No.6201WIN)
from
$161.99
Features two threaded bosses for temp control switch satin finish.
Product Features:
See More
Product Features:
- Emission System Water Outlet
Weiand – Emission System Water Outlet (Part No.6200)
from
$174.99
Features two threaded bosses for temp control switch satin finish.
Product Features:
See More
Product Features:
- Emission System Water Outlet
Popular 1972 Oldsmobile Custom Cruiser Performance Engines Categories
1972 Oldsmobile Custom Cruiser Performance Engines
Maybe you’re in the middle of a full rebuild of that 1972 Oldsmobile Custom Cruiser. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 12 different Performance Engines in our inventory ranging from $26.99 to $796.99. That means you can find the exact parts or products you need to keep that 1972 Oldsmobile Custom Cruiser running smoothly.
Performance Engines are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Oldsmobile Custom Cruiser. Spectre, Edelbrock, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1972 Oldsmobile Custom Cruiser, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1972 Oldsmobile Custom Cruiser rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1972 Oldsmobile Custom Cruiser Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Oldsmobile Custom Cruiser demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Custom Cruiser the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
FAQs for 1972 Oldsmobile Custom Cruiser Performance Engines
What are the most purchased Performance Engines for the 1972 Oldsmobile Custom Cruiser?
Out of 12 Performance Engines for the 1972 Oldsmobile Custom Cruiser, the most popular in our inventory are:
from
$28.99
This product is not rated
Intake Manifold Gasket for 1965-76 400-425-455 Oldsmobile engines
Performance Engine Intake Manifold Gaskets
