1972 Mercury Colony Park Performance and Racing Products
Find Your Specific 1972 Mercury Colony Park Performance and Racing Products
Below you will find various in-demand Mercury Performance and Racing Products, components and accessories for your 1972 Colony Park. Advance Auto Parts has popular Colony Park parts like Performance Engines, Performance Fuel Systems, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Colony Park model years including
1970,
1971,
1973,
1974,
1987,
1988,
1989,
1990,
1991 and more. Select a category of 1972 Mercury Colony Park Performance and Racing Products below and start saving instantly.
Popular 1972 Mercury Colony Park Performance and Racing Products Categories
Essential Performance and Racing Products for 1972 Mercury Colony Parks
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Lakewood – Clutch Fork Pivot Ball-Adj:GM (Part No.15501)
from
$54.99
Designed to allow additional adjustment of the clutch fork height to eliminate clutch release problems when installing a high performance clutch. Recommended for use with Lakewood safety bell housings. Available for most GM, Ford, and Mopar applications. Adjustable dowel pins correct for improper register bore alignment of bell housing.
Product Features:
See More
Product Features:
- Allows Additional Adjustment
- Eliminates Clutch Release Problems
Edelbrock – Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish (Part No.8849)
from
$473.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Maximum Cooling for Street and Racing Engines
- Internal Passages Are Balanced for Maximum Flow
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution to Both Sides of Block
- Only Flows in One-Direction for Optimum Efficiency
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7821)
from
$86.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
Mr. Gasket – Water Neck (Part No.2662)
from
$23.79
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Chrome Plated
- This Is A 45 Degree Neck
- Comes With O-ring And Bolts
- Has Small Hose Fitting On It
Mallory – Distributor Drive Gear (Part No.29420)
from
$81.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
Edelbrock – Performer-Plus camshaft for Ford 351M-400 V-8 (Part No.2172)
from
$363.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)
from
$113.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Put And End To High Maintenance Point Ignitions
- Specialized Electronic Circuitry
- Stabalizes Ignition Timing From 1 To 10000 RPM
- Improves Performance And Fuel Efficiency
- Easy To Install With Hand Tools
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Mr. Gasket – Rear Main Seal Gasket (Part No.1965)
from
$51.99
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Silicone Rubber to Withstand Extreme Engine Oil Temperatures
- Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
- Injection Molded for Precise Fit
Edelbrock – Pushrod Set for Ford 351M/400 (Part No.9633)
from
$198.99
Product Features:
See More
- 9.5 in. Length
- 0.312 in. Diameter
- 4130 Chromoly Steel Material
- Black Oxide Finish
- Made In The USA
Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7314)
from
$133.99
Product Features:
See More
- 4.5 in. Cylinder Bore Diameter
- 0.048 in. Thickness
- 12.5cc Volume
- Gray Color
- Two Piece Configuration
Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)
from
$186.99
Product Features:
See More
- Mechanical Operation
- Fuel Sending Unit Not Included
- For Small-Block 289-351 Ford Engines
- In Tank Mounting Type
- 110 GPH
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Edelbrock – RPM Air-Gap Dual-Quad Small Block Ford 351W Intake Manifold (Part No.7585)
from
$595.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available In EnduraShine Finish PN[75254]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Accel – Contact And Condenser Kit (Part No.8203)
from
$89.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – Valve Cover (Part No.9412)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Mallory – Distributor Wiring Harness (Part No.29349)
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Competition Cams – Thumpr 227/241 Hydraulic Roller Cam (Part No.35-600-8)
from
$549.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$23.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)
from
$869.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- No CARB Exemption Order Number
- Does not require an MSD Ignition Control
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
MSD Ignition – Wire Set; Street Fire; Ford 351C-460; Socket (Part No.5542)
from
$80.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5835)
from
$44.49
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1228)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-74; w/4 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Upgrade your 1972 Mercury Colony Park with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1972 Mercury Colony Park, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Performance and Racing Products are key to keeping your Colony Park functioning at its best. At Advance Auto Parts, we offer a wide selection of 162 Performance and Racing Products for the 1972 Mercury Colony Park, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Fuel Systems
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1972 Mercury Colony Park at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $1,245.99, with
an average price of $239.91.
Our 162 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1972 Mercury Colony Park without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Mercury Colony Park, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, FEL-PRO Performance, Holley, and more.
Edelbrock Performance and Racing Products
start at just $30.99 and boast an impressive 4.4 stars average rating from customers.
FEL-PRO Performance and Holley also bring quality to the table, with Performance and Racing Products available starting at $28.99, and at an average 4.2 stars rating.
With 528 customer reviews and counting, our 1972 Mercury Colony Park Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1972 Mercury Colony Park is always ready to roll. We’re committed to providing you with everything you need to keep your Colony Park in top shape, all in one place.
Start shopping confidently below for your 1972 Mercury Colony Park!
Best-Selling Performance Engines for 1972 Mercury Colony Parks
Enhance the driving experience in your Mercury with 126 quality Performance Engine components, starting at $8.99.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)
from
$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
- Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)
from
$30.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)
from
$51.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Weiand – High-Rise Dual Plane Intake Manifold for Maximum Torque (Part No.8012)
from
$399.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)
from
$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Weiand – Action +Plus; Intake Manifold (Part No.8010)
from
$386.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
Product Features:
See More
Product Features:
- Low Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$23.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Competition Cams – Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam (Part No.32-602-5)
from
$395.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)
from
$45.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Thick parallel ground washer provides more accurate, uniform torque
- Hex Prevents Socket Slippage
- Accurate And Uniform Torque
- Black Plated Finish
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Valve Cover Gasket Set (Part No.276)
from
$35.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)
from
$30.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 7 Piece Set (Part No.1240)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-82; w/2 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Water Neck (Part No.2664)
from
$35.99
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with gasket and mounting bolts
- Chrome plated
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)
from
$24.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Competition Cams – Valve Seals, Umbrella 11/32" 1 St (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)
from
$223.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1018)
from
$53.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1013)
from
$59.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7821)
from
$86.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
Most Popular 1972 Mercury Colony Park Performance Fuel Systems
Customize your Mercury with 9 Performance Fuel Systems products
like Performance Fuel Pumps and
Performance Carburetors, all
priced under $819.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Holley – Mechanical Fuel Pump (Part No.12-460-13)
from
$255.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 130 gph Free Flow
- Shutoff Pressure Pre-Set From 7.5 To 9 PSI
- Fuel Pressure Regulator Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Inlet And Outlet Tapped For 3/8 in. NPT
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Top Picks for 1972 Mercury Colony Park Performance Distributors
Upgrade Mercury Colony Parks with top-quality Performance Distributors parts, including 3 OEM and aftermarket selections for your 1972 model.
MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)
from
$635.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Simple And Clean Installation w/Only Three Wires To Connect
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Polished steel shaft is guided by a sealed ball bearing
MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)
from
$158.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
Mallory – Distributor Drive Gear (Part No.29420)
from
$81.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
In-Demand Performance Ignition Products for 1972 Mercury Colony Parks
Select from 9 premium Performance Ignition Products parts for your 1972 Mercury Colony Park, with prices ranging from $19.29 to $204.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Contact And Condenser Kit (Part No.8203)
from
$89.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)
from
$113.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Put And End To High Maintenance Point Ignitions
- Specialized Electronic Circuitry
- Stabalizes Ignition Timing From 1 To 10000 RPM
- Improves Performance And Fuel Efficiency
- Easy To Install With Hand Tools
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
MSD Ignition – Wire Set; Street Fire; Ford 351C-460; Socket (Part No.5542)
from
$80.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$53.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Mallory – Distributor Condenser (Part No.401)
from
$19.29
Distributor Condenser
Most Sold 1972 Mercury Colony Park Performance Exhaust Products
Explore our best-selling Mercury parts for the 1972 Colony Park among 7 OEM and aftermarket options starting from $28.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Product Features:
See More
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7262)
from
$30.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7228)
from
$29.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Top-Rated Performance and Racing Products Brands For Your 1972 Mercury Colony Park
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1972 Mercury Colony Parks. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, FEL-PRO Performance, and Holley, and more. Performance and Racing Products from these brands that fit a 1972 Colony Park start at just $28.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1972 Mercury Colony Park Performance and Racing Products
When it comes to maintaining or upgrading your 1972 Mercury Colony Park, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1972 Mercury Colony Park. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.99, with an average price of just $287.99. Plus, with over 12 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$437.99
(1)
Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR)
“works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not ”
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
Popular FEL-PRO Performance 1972 Mercury Colony Park Performance and Racing Products
FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1972 Mercury Colony Park owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1972 Colony Park, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Mercury in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $28.99 to $50.99, plus, with more than 6 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1972 Mercury Colony Park Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1972 Mercury Colony Parks?
Out of 162 Performance and Racing Products that fit 1972 Mercury Colony Parks, the following parts are the top sellers:
- Lower Intake Manifold Gasket Set: 11 Piece Set (5991277) – $35.99
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Intake Manifold Bolts (17360287) – $23.79
What’s the price range for 1972 Mercury Colony Park Performance and Racing Products?
Performance and Racing Product prices for the 1972 Mercury Colony Park start at $8.99 and go up to $1,245.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1972 Mercury Colony Park?
The average price for Performance and Racing Products for the 1972 Mercury Colony Park is $239.91. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Mercury Colony Park model years?
What are the cheapest Performance and Racing Products for my 1972 Mercury Colony Park?
The cheapest 1972 Mercury Colony Park Performance and Racing Products we carry in stock are:
- High Energy 8.616" Long, 5/16" Diameter Pushrod (50289318) – $8.99
- High Energy 7.870" Long, 5/16" Diameter Pushrod (50289329) – $8.99
- 10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
- 7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (50289506) – $10.99
- 7 Degree Steel Retainer for 11/32" Valve with 1.437"-1.500" Spring (50289120) – $10.99
What are the top-rated Performance and Racing Products that fit the 1972 Mercury Colony Park?
Out of 528 reviews by customers, our 1972 Mercury Colony Park Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1972 Mercury Colony Park and their top-rated products:
- Performance Fuel Systems
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Performance Ignition Products
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
What types of Performance and Racing Products do you sell for my 1972 Mercury Colony Park?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1972 Mercury Colony Park:
Can I get help with 1972 Mercury Colony Park Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Performance and Racing Products and more.
What is your return policy for Mercury Colony Park Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Mercury Colony Park Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
