1972 GMC C25/C2500 Pickup Drivetrains
More 1972 GMC C25/C2500 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1972 GMC C25/C2500 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1972 GMC C25/C2500 Pickup Drivetrains
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)
from
$174.99
Pump up kit, Zip Locker.
Product Features:
See More
Product Features:
- Tire pump up kit
- Includes hose, fittings, couplers and teflon tape
Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)
from
$288.99
Product Features:
See More
- Nodular iron for added strength
- Thick design
- Durable powder coat finish
- Magnetic drain plug
- Made in USA
- High strength stainless steel fasteners
Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)
Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)
from
$10.99
14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 10.5″ 14 bolt truck
- 4.11 and down ratio
- 1/2″ x 18 thread
- 2.085″ overall length
Yukon Gear – Bearing Race Driver (Part No.56020)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M802011 race
- All steel construction
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Driveworks – Ball Bearing (Part No.S-206-FF)
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Pro-King – Differential Pinion Nut (Part No.744A961)
from
$10.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline (Part No.28004)
from
$1204.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 with 30 spline axles
- 4.56 and up ratio only
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)
from
$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 10.5″ 14 bolt truck with Eaton positraction
- Carbon fiber clutches
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)
USA Standard Gear – Master Overhaul Kit for the ’88 and Older GM 10.5" 14T Differential (Part No.37044)
from
$349.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 1988 and down GM 10.5″ 14 bolt truck
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Yukon Gear – Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size (Part No.41029)
from
$266.99
Yukon forged replacement yoke for Dana 60, stronger than billet, with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Replacement Pinion Seal For Dana 44HD, Dana 60 & Dana 70 (Part No.30208)
from
$39.99
Replacement pinion seal for Dana 44HD, Dana 60 & Dana 70 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Pinion seal
- Fits Dana Spicer 44HD, 60, 70, 70U and 70HD
National – Bearings (Part No.LM501310)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Spartan Spring & Pin Kit, Fits Larger Designs (Part No.17010)
from
$26.99
Spartan spring & pin kit, fits larger designs.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Replacement alignment pin and spring kit
Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)
from
$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Includes carrier bearings and races and carrier shim kit
Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)
from
$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Popular 1972 GMC C25/C2500 Pickup Drivetrains Categories
1972 GMC C25/C2500 Pickup Drivetrains
You count on your 1972 GMC C25/C2500 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 257 Drivetrains ranging in price from $3.99 to $1,487.99, you’re sure to find everything you need for your 1972 GMC C25/C2500 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Spicer, and Felpro. 1972 GMC C25/C2500 Pickup Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,793 extensive product reviews on 1972 GMC C25/C2500 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Bearing with 3.4 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 2.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1972 GMC C25/C2500 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1972 GMC C25/C2500 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 GMC C25/C2500 Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, Spicer, Felpro, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Universal Joints. All are waiting to get your 1972 GMC C25/C2500 Pickup back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1972 GMC C25/C2500 Pickup, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1972 GMC C25/C2500 Pickup Drivetrains
What are the most purchased Drivetrains for the 1972 GMC C25/C2500 Pickup?
Out of 257 Drivetrains for the 1972 GMC C25/C2500 Pickup, the most popular in our inventory are:
What are the top-rated 1972 GMC C25/C2500 Pickup Drivetrains?
Top-rated Drivetrains for your 1972 GMC C25/C2500 Pickup based on customer reviews/ratings are:
