1972 Ford Pinto Drivetrains
More 1972 Ford Pinto Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1972 Ford Pinto, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1972 Ford Pinto Drivetrains
Motive Gear – Differential Pinion Shaft Support Block (Part No.D3SZ4211A)
from
$47.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)
USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Extra Short (Part No.17044)
from
$22.99
9″ FORD SPARTAN LOCKER EXTRA SHORT Cross Pin SHAFT .
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Ford 9″
Yukon Gear – Outer Axle Seal For 8" Ford (Part No.30031)
from
$43.99
Outer axle seal for 8″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Fits Ford 8″
Yukon Gear – Pinion Depth Shims For Ford 8" (Part No.55055)
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)
from
$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Pinion Install Kit For Ford 8" Differential (Part No.13040)
from
$229.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 8″
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)
Yukon Gear – Trac Loc Clutch Hub For 9" Ford With 28 Splines (Part No.16159)
from
$139.99
Trac Loc clutch hub for 9″ Ford with 28 splines.
Product Features:
See More
Product Features:
- Clutch hub
- Fits Ford 8″ and 9″ 28 spline Trac Loc
Yukon Gear – Crush Sleeve (Part No.33093)
from
$10.99
Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
- 0.495″ tall
Yukon Gear – Pinion Gear For 8" And 9" Ford (Part No.16160)
Yukon Gear – 8" Ford O-Ring (Part No.30027)
Dorman – Standard Spindle Nut 13/16 In.-20 Hex Size 1-1/8 In. (sold by each) (Part No.615-074)
from
$4.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Drive Axle Shaft Flange Gasket (Part No.4978)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – 7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver (Part No.30226)
from
$37.99
7.5″, 8″, 8.8″, 9″, 10.25″ Ford REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Ford 7.5″, 8.8″, 9″ and 10.25″
Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)
from
$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-013)
from
$1.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Trac Loc Ring Gear Bolt Washer For 8" And 9" Ford (Part No.33245)
from
$3.99
Trac Loc ring gear bolt washer for 8″ and 9″ Ford.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For Trac Loc positraction applications only
Yukon Gear – Good Used Yoke For Ford 8" With A 1310 U/Joint Size (Part No.41047)
from
$234.99
Good used Yukon yoke for Ford 8″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8″
- 25 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- U-bolt style
USA Standard Gear – Master Overhaul Kit for the Ford 8" Differential (Part No.37028)
from
$248.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Ford 8″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.RA310RAMK)
from
$129.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- FORD 8″ BRG MSTR KIT W/AUBURN & TRUETRAC
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8" In A 3.80 Ratio (Part No.24093)
from
$457.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Ford 8″
- 8.00″ ring gear diameter
- 25 spline pinion
- 10 ring gear bolts
- 3.80 ratio
Yukon Gear – Trac-Loc For Ford 8" With 28 Spline Axles – Aggressive Design (Part No.26001)
from
$909.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8″ with 28 spline axles
- Trac Loc positraction
- Clutch style positraction
- Aggressive design
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Powertrax – Grip LOK Traction System (Part No.LK109028)
from
$668.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Popular 1972 Ford Pinto Drivetrains Categories
1972 Ford Pinto Drivetrains
You count on your 1972 Ford Pinto to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 125 Drivetrains ranging in price from $1.99 to $941.99, you’re sure to find everything you need for your 1972 Ford Pinto.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Moog, DriveWorks, and National. 1972 Ford Pinto Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 987 extensive product reviews on 1972 Ford Pinto Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.9 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1972 Ford Pinto below to get started!
Top-Rated Drivetrains Brands For Your 1972 Ford Pinto
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 Ford Pinto running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, National, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1972 Ford Pinto back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1972 Ford Pinto, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1972 Ford Pinto Drivetrains
What are the most purchased Drivetrains for the 1972 Ford Pinto?
Out of 125 Drivetrains for the 1972 Ford Pinto, the most popular in our inventory are:
What are the top-rated 1972 Ford Pinto Drivetrains?
Top-rated Drivetrains for your 1972 Ford Pinto based on customer reviews/ratings are:
from
$28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
