1972 Ford F-250 Pickup Suspension Parts

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

• 150 PSI Pressurized Nitrogen Gas
• Multi Stage Velocity Sensitive Valving
• Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
• Bonded Iron Piston For Durability And Longer Shock Life
• Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
• Orifice Disk For Axle Control In Any Condition
• Red Polyurethane Bushings

Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whiteline’s superior formulation shock bushings enhance the performance of new and used shock absorbers.

Product Features:

• Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Heat Treated bushings
• No Squeak
• Reduces vibration

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

Ride-Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200 to 5,000 Pounds per set.

Product Features:

• Level The Vehicle Front-To-Rear And Side-To-Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

• Level The Vehicle Front-To-Rear And Side-To-Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Timbren Suspension Enhancement System – The Decision is Easy…Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Improve load handling Haul heavy loads with ease Eliminate sag and sway

Product Features:

• Eliminate Suspension Sag When Towing A Heavy Trailer Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway A Condition Which Occurs With Unbalanced Loads In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
• Limited Lifetime Warranty

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
• IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
• 1-3/8 inch (34.9 mm) bore (On most applications)
• 5/8-inch (15.9 mm) diameter piston rod (On most applications)

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:

• Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
• 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
• 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
• Protective boot included – Protects the shock rod and oil seal

Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic light trucks and vans
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available