1972 Dodge D100 Pickup Cooling and Climate Controls
More 1972 Dodge D100 Pickup Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1972 Dodge D100 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1972 Dodge D100 Pickup Cooling and Climate Controls
National – Bearings (Part No.5206-DD)
from
$52.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Mr. Gasket – Electric Water Pump Drive Kit (Part No.4333)
from
$136.99
The electric water pump drive kit was designed to alleviate the power drag produced by conventional pulley drive units. A heavy duty electric motor, turning at approximately 1,500 rpm, is more than adequate to fulfill cooling needs w/o draining horsepower from the engine. The unit can be turned on/off manually, even with the engine off. The kit is complete with motor, mounting brackets, extra long bolts, spline pulleys, drive belts, wiring and switch. You supply the fan of your choice.
Product Features:
See More
Product Features:
- No more power loss to parasitic drag
- All parts needed included
- Service parts available
Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84830)
from
$14.29
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- Coated with corrosion and rust inhibitor
- 100% leak tested
- Direct-fit replacement for ease of installation
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)
from
$125.99
Trimline Straight Blade Electric Fan
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13358)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35602)
from
$19.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Galvanized steel construction
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Set screw installation
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest – HVAC Blower Control Switch (Part No.BL3)
from
$22.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4830KT)
from
$14.79
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Carquest Premium – HVAC Cable Operated Open Non-Bypass Heater Valve (Part No.T74627)
from
$33.99
Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.
See More
Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)
from
$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Carquest Premium – A/C Filter Drier (Part No.T33259)
from
$35.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Felpro – Engine Water Pump Gasket (Part No.11730)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Factory Air – Green Round O-Ring (Part No.24608)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Blower Motor: Without Wheel (Part No.35555)
from
$48.49
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Factory Air – Compressor Discharge Port Gasket (Part No.24136)
from
$2.99
Steel construction; Compatible with R12 And R134A; High quality construction; Oil resistant; Universal applications
See More
Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle (Part No.902-3015)
from
$11.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Dorman – Help – Drain Cock-Brass-1/4 In. NPT (Part No.61106)
from
$5.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Carquest Premium – Universal Fan Clutch – 7" Thermal Regular Duty (Part No.215043)
from
$57.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Felpro – Engine Coolant Outlet Gasket (Part No.35063)
from
$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1097)
from
$16.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38844)
from
$34.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Popular 1972 Dodge D100 Pickup Cooling and Climate Controls Categories
1972 Dodge D100 Pickup Cooling and Climate Controls
You count on your 1972 Dodge D100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 73 Cooling and Climate Controls ranging in price from $0.99 to $569.99, you’re sure to find everything you need for your 1972 Dodge D100 Pickup.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 13 different brands like Carquest Premium, Permatex, and Motorad UltraStats. 1972 Dodge D100 Pickup Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 7,978 extensive product reviews on 1972 Dodge D100 Pickup Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 4.8 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1972 Dodge D100 Pickup below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1972 Dodge D100 Pickup
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 Dodge D100 Pickup running right for years to come. In our inventory you’ll find brands like Carquest Premium, Permatex, Motorad UltraStats, and even more.
Popular Felpro Cooling and Climate Controls
You’ll find popular Felpro brand products across Engine Cooling Parts. All are waiting to get your 1972 Dodge D100 Pickup back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Cooling and Climate Controls
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1972 Dodge D100 Pickup, and some of our most reviewed Carquest Premium parts include:
FAQs for 1972 Dodge D100 Pickup Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1972 Dodge D100 Pickup?
Out of 73 Cooling and Climate Controls for the 1972 Dodge D100 Pickup, the most popular in our inventory are:
What are the top-rated 1972 Dodge D100 Pickup Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1972 Dodge D100 Pickup based on customer reviews/ratings are:
from
$22.99
(35)
Adjustable Thermostatic Fan Control
“good price, but does not come with knob to set temp”
from
$55.99
(33)
Adjustable Thermostatic Fan Control
“If you read the instructions it’s pretty self explanatory.”
