1972 AMC Ambassador Engine Cooling Parts

Essential 1972 AMC Ambassador Engine Cooling Parts

Carquest Premium – Radiator Cap: 7 PSI (Part No.10328)

Radiator Cap: 7 PSI

from

$7.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14556)

Belt-Driven Fan Spacer Kit

from

$22.99
Belt-Driven Fan Spacer Kit

Carquest Premium – Universal Fan Clutch – 7" Thermal Regular Duty (Part No.215049)

Universal Fan Clutch - 7" Thermal Regular Duty

from

$49.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1168)

Temperature Sender With Gauge

from

$7.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13476)

Standard Thermostat: 160 Degrees

from

$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Edelbrock – Water Pump AMC Short Style 1968-72 (Part No.8831)

Water Pump AMC Short Style 1968-72

from

$337.99
Edelbrock #8831 Water Pump GMC short style 1968-72 ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pumps t

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 4.4375 in. Block To Hub Height
  • Satin Finish
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3088)

Engine Water Pump: New, Gasket/Seals Included

from

$71.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84815)

Coolant Housing/Water Outlet: Gasket Included

from

$17.79
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84809)

Coolant Housing/Water Outlet: Gasket Included

from

$18.49
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Felpro – Engine Water Pump Gasket (Part No.13877)

Engine Water Pump Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Trimline Straight Blade Electric Fan

from

$125.99
Trimline Straight Blade Electric Fan

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Electric Fan - 10" Diameter

from

$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 10″ Diameter
  • 650 CFM
  • Use as a pusher or puller fan
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35063)

Engine Coolant Outlet Gasket

from

$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35024)

Engine Coolant Outlet Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Factory Air – 16" Reversible Fan Kit (Part No.36898)

16" Reversible Fan Kit

from

$227.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • Motors built and tested to quality specifications
  • 16″ universal fit reversible fan
  • Includes mounting and relay kit
  • 2320 CFM
See More

Factory Air – 14" Reversible Fan Kit (Part No.36897)

14" Reversible Fan Kit

from

$164.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • Motors built and tested to quality specifications
  • 14″ universal fit reversible fan
  • Includes mounting and relay kit
  • 1350 CFM
See More

Flex A Lite – 400 Series Nylon Flex Fan (Part No.418)

400 Series Nylon Flex Fan

from

$34.99
400 Series Nylon Flex Fan

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Flex A Lite – Black Magic Electric Fan (Part No.180)

Black Magic Electric Fan

from

$367.99
Black Magic Electric Fan

Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)

X-Treme S-Blade Electric Fan

from

$519.99
X-Treme S-Blade Electric Fan

Imperial – 16" Electric Fan (Part No.226216)

16" Electric Fan

from

$115.99
Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Thin-line electric fan
  • 16″ diameter
  • 1,400 CFM
  • Use as a pusher or puller fan
See More

1972 AMC Ambassador Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1972 AMC Ambassador. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 40 different Engine Cooling Parts in our inventory ranging from $2.29 to $519.99. That means you can find the exact parts or products you need to keep that 1972 AMC Ambassador running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1972 AMC Ambassador. Permatex, Carquest Premium, and Motorad UltraStats are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1972 AMC Ambassador, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 17,814 reviews in this category, some of the top rated parts include Radiator Cap: 13 PSI with 4.5 stars and Radiator Cap: 13 PSI with 4.8 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1972 AMC Ambassador rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1972 AMC Ambassador Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 AMC Ambassador demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Ambassador the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Felpro Engine Cooling Parts

We carry Felpro parts in our stock across Thermostat and Water Outlet Gaskets categories, plus more. For a 1972 AMC Ambassador, our most popular Felpro Engine Cooling Parts include:
Engine Coolant Outlet Gasket
from $2.29
(9)
Engine Coolant Outlet Gasket
Thermostat and Water Outlet Gaskets

Top 1972 AMC Ambassador Engine Cooling Parts from Permatex

Permatex products are another trusted brand when it comes to Engine Cooling Parts for your 1972 AMC Ambassador. Popular Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 1972 AMC Ambassador Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1972 AMC Ambassador?

Out of 40 Engine Cooling Parts for the 1972 AMC Ambassador, the most popular in our inventory are:
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
Standard Thermostat: 180 Degrees
from $9.99
(36)
Standard Thermostat: 180 Degrees
Thermostats
Thermostat: 195 Degrees
from $18.29
This product is not rated
Thermostat: 195 Degrees
Thermostats

What are the top-rated 1972 AMC Ambassador Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1972 AMC Ambassador based on customer reviews/ratings are:
Radiator Cap: 13 PSI
from $9.79
(51)
Radiator Cap: 13 PSI
“It’s a radiator cap, it keeps the coolant in the radiator under pressure. Works as it should”
Radiator Cap: 13 PSI
from $10.49
(48)
Radiator Cap: 13 PSI
“Like the vent feature.”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”