1971 Jeep J-100 Performance and Racing Products
More 1971 Jeep J-100 Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1971 Jeep J-100, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1971 Jeep J-100 Performance and Racing Products
Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)
from
$424.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Not for Stock Motorcraft Spread Bore Carburetor
- Two Center Bolt Holes are Offset
Omix – Timing Chain (Part No.17453.07)
from
$109.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Omix – Piston Ring Set (Part No.17430.23)
from
$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- .060 Over
- Engine Work May Be Required To Install This Part
- Limited 5 Year Warranty
MSD Ignition – Distributor; 6-cyl. AMC Jeep 232-258; 4.0L (Part No.8516)
from
$512.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!
Product Features:
See More
Product Features:
- Designed For Street/Performance Use w/Mech or Vacuum Advance
- Must Be Used w/An MSD Ignition Control
- Supplied w/Socket Style Distributor Cap And Rotor
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
Accel – Distributor Cap And Rotor Kit (Part No.8120)
Rancho – Single Steering Damper Kit (Part No.RS97355)
from
$113.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for a variety of trucks and SUVs from Chevrolet®, GMC®, Ford®, Dodge®, Jeep®, Plymouth® and International®
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
Accel – High Performance Contact Set 32 Oz (Part No.110128)
from
$46.99
ACCEL high-performance 32 ounce points resist point float up to 6,500 RPM. Extra-thick contact arms prevent flexing. Large tungsten contacts provide crisp circuit-breaking for peak coil output. Phenolic rubbing blocks endure heavy spring loads.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Energy Suspension – Sway Bar Bushing Set (Part No.2.5105G)
from
$37.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.2.5103R)
from
$37.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Airaid – Air Filter (Part No.800-314)
from
$55.99
304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.
Product Features:
See More
Product Features:
- Multi-Layer Construction
- Most Durable Filters In The Industry
- Outperforms The Others In Clean Air Testing
- Assures Cleanest Air Possible From Washable Filter
- Washable And Reusable
- Made In The USA
- Lifetime No Hassle Warranty
Airaid – Replacement Air Filter (Part No.800-311)
from
$55.99
This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.
See More
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1007)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
Mr. Gasket – Radiator Cap (Part No.2481)
from
$16.99
Cap off your radiator with a gleaming chrome plated filler cap. Made to last.
Product Features:
See More
Product Features:
- Chrome radiator caps
- Made to last
- Skin packaged
Mr. Gasket – Thermocap Radiator Cap (Part No.2470S)
from
$54.99
Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps to prevent coolant injuries
- Integrated coolant reclamation valve
- Improves under hood appearance
- Fits most domestic vehicles
- Built in calibrated thermometer
Omix – Tie Rod End Tube (Part No.18046.03)
from
$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Wiring Harness (Part No.29349)
Omix – Exhaust Manifold (Part No.17624.12)
from
$264.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.
Product Features:
See More
Product Features:
- Right Side
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Exhaust Manifold (Part No.17624.06)
from
$261.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.30)
from
$123.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles and
Product Features:
See More
Product Features:
- Cast Steel
- Black Finish
Hooker Headers – Super Competition Header Gasket (Part No.10804HKR)
from
$18.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Omix – Exhaust Manifold Gasket Set (Part No.17451.08)
from
$37.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.
Product Features:
See More
Product Features:
- Aluminum
- Pair
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$36.99
Brake Bleeder Screws
Popular 1971 Jeep J-100 Performance and Racing Products Categories
1971 Jeep J-100 Performance and Racing Products
You count on your 1971 Jeep J-100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 37 Performance and Racing Products ranging in price from $16.99 to $512.99, you’re sure to find everything you need for your 1971 Jeep J-100.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 14 different brands like K&N, Accel, and Mr. Gasket. 1971 Jeep J-100 Performance and Racing Products start as low as $16.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 158 extensive product reviews on 1971 Jeep J-100 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Coil; Blaster 2; High Performance with 4.3 stars and Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1971 Jeep J-100 below to get started!
Top-Rated Performance and Racing Products Brands For Your 1971 Jeep J-100
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Jeep J-100 running right for years to come. In our inventory you’ll find brands like K&N, Accel, Mr. Gasket, and even more.
Popular Edelbrock Performance and Racing Products
You’ll find popular Edelbrock brand products across Performance Engines. All are waiting to get your 1971 Jeep J-100 back on the road. Some of the top-rated Edelbrock products in these categories are:
from
$424.99
(1)
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Performance Intake Manifolds
Top-Rated Accel Performance and Racing Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1971 Jeep J-100, and some of our most reviewed Accel parts include:
FAQs for 1971 Jeep J-100 Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1971 Jeep J-100?
Out of 37 Performance and Racing Products for the 1971 Jeep J-100, the most popular in our inventory are:
from
$17.99
(50)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
What are the top-rated 1971 Jeep J-100 Performance and Racing Products?
Top-rated Performance and Racing Products for your 1971 Jeep J-100 based on customer reviews/ratings are:
from
$102.99
(5)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“Seeing the commercials on the speed channel got me thinking about my 1996 Dodge Dakota 4×4 with V-6, with a lot of miles. Needed a boost of power and”
from
$512.99
(5)
Distributor; 6-cyl. AMC Jeep 232-258; 4.0L
“Work’s great. My problem was it would not shut off.”
