from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environment
PermaDryPlus water outlet gaskets utilize rigid carrier construction and silicone sealing beads to ensure a long-lasting seal, including those with warped housing flanges
Validated for fit, form, and function
Quality that you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$349.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$9.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$18.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.49

The engine coolant temperature sender, not to be confused with the engine coolant temperature sensor, is located anywhere within the engine cooling system, and contains a thermistor that changes in resistance value as the thermistors ambient temperature changes. The engine coolant temperature sender is fed 12 volts and is typically used in conjunction with a gauge in the instrument cluster to provide a visual representation of the engine coolant temperature condition.

Product Features:

Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Thermally conductive grease within the housing providing the most accurate temperature transfer from the engine to the thermistor.
Plated brass or aluminum housings to prevent housing corrosion, ensures effective heat distribution to thermal element, and ensure a secure and leak-free thread mount.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$4.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$23.99

Spectre’s Chevrolet V8 water neck fits 1955 – 1965 Chevy 265 – 454 V8 engines and 1956 – 1963 Chevy Corvette engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes the bolts and sealing O-ring.

Product Features:

Fits 1955 – 1965 Chevy 265 – 454 V8 engines and 1956 – 1963 Chevy Corvette engines
Includes bolts and sealing O-ring
Chrome plated
Designed for OEM fit
Easy to install

from

$92.99

Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan

from

$201.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$48.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$21.29

All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications

from

$596.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability
Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant

from

$47.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$7.99

Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:

Made from cellulose/nitrile composition
Provides excellent sealing and durability
These gaskets are die cut for precision
Can be trimmed for port modifications

from

$17.49

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$5.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Designed for the OE distributor as a direct replacement part

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$9.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$57.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$24.79

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$61.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$41.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$44.99

Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.

Product Features:

Indicates coolant temperature
Helps to prevent coolant injuries
Integrated coolant reclamation valve
Improves under hood appearance
Fits most domestic vehicles
Built in calibrated thermometer

from

$13.49

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$45.49

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features: