from

$1.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.99

AT OIL PUMP ORING

from

$141.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$309.99

The B&M converter lockup controller provides dash-mounted control to govern converter lockup at any speed between 30 and 90 mph. These kits eliminate converter lock and unlock cycling and premature unwanted converter lockup.

Product Features:

Dash Mounted Control For Speeds Between 30-90 mph
LED Indicates Locked OR Unlocked

from

$7.99

AT SEL SHAFT SEAL

from

$368.99

AT MSTR REP KIT PLUS

from

$5.99

AT SEAL

from

$8.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$65.99

These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Includes drain plug, gasket and hardware.

Product Features:

Overall Height: 2.0″
Stock Depth and Capacity
Includes: Drain Plug, Washer & Gasket

from

$10.99

AT OIL PUMP GASKET

from

$5.99

AT DPSTK TUBE SEAL

from

$18.99

Product Features:

Edelbrock Part # 8026 GM Transmission adapter is for use with 2004R, 700R4, 4L60 transmissions.
This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve style transmission (700R4, 2004R, 4L60).
The pin location is critical as the TV controls line pressure, shift points, shift firmness, and part throttle downshifts.

from

$5.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$25.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$43.99

B&M’s vacuum modulator is fully adjustable, this allows you to tailor your shift points to within a range of 2-4 mph. Comes preadjusted for normal shift points. For TH350 and TH400.

Product Features:

Fully Adjustable
Allows You To Tailor Shift Points
Comes Supplied Pre-Adjusted

from

$7.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$44.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$309.99

Features include NHRA/ IHRA reverse lockout, backup light switch, neutral safety switch, polished T-handle. Cable operated for quick installation and accurate shifting. For 2 and 3 speed applications.

Product Features:

Base Trims For Custom Fit
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements
Includes Neutral Safety Switch
Polished Aluminum. T-Handle and Cable

from

$25.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$109.99

This kit allows you to adjust the shift points of your transmission after it is installed in your vehicle. The Governor Recalibration Kit is very useful if you have a vehicle that is very light; has a low rear-end gear ratio.

Product Features:

Adjust Shift Points Of Transmission
Useful For Light Vehicles
For Low Rear End Gear Ratio
Or Useful If It Is Conversion

from

$28.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$299.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$14.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$44.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$193.99

AT BANNER KIT

from

$9.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 65-74; CHEV 57-84; GMC 67-84; OLDS 64-79; PONT 64-81;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1957-1984
Weight approx: 2 Lbs
HEIGHT: 1.8 INCH: 45.7 MM
ALL BOLT HOLES INLINE
BOLT CENTERLINE: 1.5 INCH: 38.1 MM

from

$19.79

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
Chevy 90░ V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
0.68″ Underhead Length
200,000 PSI

from

$18.99

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
0.725″ Underhead Length
200,000 PSI