1971 Ford M-400 Performance and Racing Products
Find Your Specific 1971 Ford M-400 Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1971 M-400. Advance Auto Parts has popular M-400 parts like Performance Ignition Products, Performance Radiators, Performance Valve Covers and more. You’ll also find aftermarket and OEM Performance and Racing Products for other M-400 model years including
1972
1973 and more. Select a category of 1971 Ford M-400 Performance and Racing Products below and start saving instantly.
Popular 1971 Ford M-400 Performance and Racing Products Categories
Essential Performance and Racing Products for 1971 Ford M-400s
Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.33-224-3)
from
$395.99
HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer 390 Intake Manifold for Ford FE, Satin Finish (Part No.2105)
from
$597.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)
from
$40.49
Brake Bleeder Screws
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-221-3)
from
$648.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-224-3)
from
$648.99
FE FORD HYDRAULIC CAM AND LIFTER KIT – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for FE Ford engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)
from
$113.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Put And End To High Maintenance Point Ignitions
- Specialized Electronic Circuitry
- Stabalizes Ignition Timing From 1 To 10000 RPM
- Improves Performance And Fuel Efficiency
- Easy To Install With Hand Tools
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$53.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Mr. Gasket – Dust Cap (Part No.2485)
from
$14.29
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mr. Gasket – Valve Cover (Part No.9412)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Upgrade your 1971 Ford M-400 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1971 Ford M-400, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your M-400 functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Performance and Racing Products for the 1971 Ford M-400, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Radiators
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1971 Ford M-400 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $10.99 to $648.99, with
an average price of $202.25.
Our 35 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1971 Ford M-400 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 Ford M-400, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, MSD Ignition, Competition Cams, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
MSD Ignition and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $33.99, and at an average 4.2 stars rating.
With 61 customer reviews and counting, our 1971 Ford M-400 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1971 Ford M-400 is always ready to roll. We’re committed to providing you with everything you need to keep your M-400 in top shape, all in one place.
Start shopping confidently below for your 1971 Ford M-400!
Best-Selling Performance Ignition Products for 1971 Ford M-400s
Enhance the driving experience in your Ford with 6 quality Performance Ignition Product components, starting at $34.49.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)
from
$113.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Put And End To High Maintenance Point Ignitions
- Specialized Electronic Circuitry
- Stabalizes Ignition Timing From 1 To 10000 RPM
- Improves Performance And Fuel Efficiency
- Easy To Install With Hand Tools
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$53.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Most Popular 1971 Ford M-400 Performance Radiators
Customize your Ford with 2 Performance Radiators products
like Performance Radiator Caps, all
priced under $55.99.
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Top Picks for 1971 Ford M-400 Performance Valve Covers
Upgrade Ford M-400s with top-quality Performance Valve Covers parts, including 1 OEM and aftermarket selections for your 1971 model.
Mr. Gasket – Valve Cover (Part No.9412)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
In-Demand Performance Engines for 1971 Ford M-400s
Select from 24 premium Performance Engines parts for your 1971 Ford M-400, with prices ranging from $10.99 to $648.99.
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Edelbrock – Performer 390 Intake Manifold for Ford FE, Satin Finish (Part No.2105)
from
$597.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-221-3)
from
$648.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-224-3)
from
$648.99
FE FORD HYDRAULIC CAM AND LIFTER KIT – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for FE Ford engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
Competition Cams – 10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring (Part No.741-100)
from
$637.99
10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring
Competition Cams – Magnum 248/248 Solid Flat Cam and Lifter Kit for Ford 352-428 (Part No.CL33-246-4)
from
$612.99
Magnum 248/248 Solid Flat Cam and Lifter Kit for Ford 352-428
Competition Cams – Magnum 236/236 Solid Flat Cam and Lifter Kit for Ford 352-428 (Part No.CL33-245-4)
from
$576.99
Magnum 236/236 Solid Flat Cam and Lifter Kit for Ford 352-428
Competition Cams – Magnum 2230/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-230-4)
from
$426.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – High Energy 212/212 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-222-3)
from
$404.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.33-224-3)
from
$395.99
HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – Magnum 248/248 Solid Flat Cam for Ford 352-428 (Part No.33-246-4)
from
$385.99
Magnum 248/248 Solid Flat Cam for Ford 352-428
Competition Cams – Adjustable Double Roller Timing Set for Ford 390-428 (Part No.3108KT)
from
$362.99
Adjustable Double Roller Timing Set for Ford 390-428
Competition Cams – Magnum 2230/230 Hydraulic Flat Cam (Part No.33-230-4)
from
$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – Magnum 253/253 Hydraulic Flat Cam (Part No.33-241-4)
from
$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – 7 Degree Steel Retainer Set of 16 for 11/32" Valves with 1.500"-1.550" Spring (Part No.782-16)
from
$80.99
7 Degree Steel Retainer Set of 16 for 11/32" Valves with 1.500"-1.550" Spring
Competition Cams – 7 Degree Steel Retainer Set of 16 for 3/8" Valve with 1.437"-1.500" Spring (Part No.744-16)
from
$80.99
7 Degree Steel Retainer Set of 16 for 3/8" Valve with 1.437"-1.500" Spring
Competition Cams – 7 Degree Steel Retainer Set of 16 for 3/8" Valves with 1.500"-1.550" Spring (Part No.780-16)
from
$80.99
7 Degree Steel Retainer Set of 16 for 3/8" Valves with 1.500"-1.550" Spring
Competition Cams – Engine Valve Spring (Part No.940-1)
from
$12.99
Engine Valve Spring
Competition Cams – 10 Degree Steel Retainer for 26120 Beehive Spring (Part No.795-1)
from
$10.99
10 Degree Steel Retainer for 26120 Beehive Spring
Competition Cams – 7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (Part No.780-1)
from
$10.99
7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring
Competition Cams – 7 Degree Steel Retainer for 11/32" Valves with 1.500"-1.550" Spring (Part No.782-1)
from
$10.99
7 Degree Steel Retainer for 11/32" Valves with 1.500"-1.550" Spring
Most Sold 1971 Ford M-400 Performance Wheels
Explore our best-selling Ford parts for the 1971 M-400 among 1 OEM and aftermarket options starting from $14.29.
Mr. Gasket – Dust Cap (Part No.2485)
from
$14.29
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
Top-Rated Performance and Racing Products Brands For Your 1971 Ford M-400
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1971 Ford M-400s. Below you’ll find some of our best rated Performance and Racing Products from Mallory, MSD Ignition, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1971 M-400 start at just $33.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1971 Ford M-400 Performance and Racing Products
When it comes to maintaining or upgrading your 1971 Ford M-400, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1971 Ford M-400. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular MSD Ignition 1971 Ford M-400 Performance and Racing Products
MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1971 Ford M-400 owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1971 M-400, Advance Auto Parts carries a full inventory of 1 MSD Ignition Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range up to $55.99, plus, with more than 20 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1971 Ford M-400 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1971 Ford M-400s?
Out of 35 Performance and Racing Products that fit 1971 Ford M-400s, the following parts are the top sellers:
- High Performance Thermostat (22903641) – $32.49
- Dust Cap (22901302) – $14.29
- Performer 390 Intake Manifold for Ford FE, Satin Finish (5026369) – $597.99
What’s the price range for 1971 Ford M-400 Performance and Racing Products?
Performance and Racing Product prices for the 1971 Ford M-400 start at $10.99 and go up to $648.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1971 Ford M-400?
The average price for Performance and Racing Products for the 1971 Ford M-400 is $202.25. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford M-400 model years?
What are the cheapest Performance and Racing Products for my 1971 Ford M-400?
The cheapest 1971 Ford M-400 Performance and Racing Products we carry in stock are:
- 10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
- 7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (50289506) – $10.99
- 7 Degree Steel Retainer for 11/32" Valves with 1.500"-1.550" Spring (50289132) – $10.99
- Engine Valve Spring (50286866) – $12.99
- Dust Cap (22901302) – $14.29
What are the top-rated Performance and Racing Products that fit the 1971 Ford M-400?
Out of 61 reviews by customers, our 1971 Ford M-400 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1971 Ford M-400 and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $95.99
- Blaster 2 Coil: High Performance Ignition Upgrade (17350171) – $55.99
- Kit:Ford V8Sngl Pnt Eliminator (22904816) – $113.99
- Performance Radiators
- Unilite Ignition Module (17350025) – $95.99
- Blaster 2 Coil: High Performance Ignition Upgrade (17350171) – $55.99
- Kit:Ford V8Sngl Pnt Eliminator (22904816) – $113.99
What types of Performance and Racing Products do you sell for my 1971 Ford M-400?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1971 Ford M-400:
Can I get help with 1971 Ford M-400 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford M-400 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford M-400 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
