1971 Ford F-100 Pickup Drive Shafts and Axles

More 1971 Ford F-100 Pickup Drive Shafts and Axles

Find your specific 1971 Ford F-100 Pickup original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1971 Ford F-100 Pickup Drive Shafts and Axles

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$145.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

(1 reviews)
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

National – Multi Purpose Seal (Part No.5131)

Multi Purpose Seal

from

$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

(20 reviews)
View Product

Driveworks – Oil Seal (Part No.S-5131)

Oil Seal

from

$9.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More
View Product

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(4 reviews)
View Product

National – Bearings (Part No.28580)

Bearings

from

$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)

Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford

from

$58.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.

Product Features:
  • Adapter washer
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88508-A)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(17 reviews)
View Product

Driveworks – Ball Bearing (Part No.S-HB-88107-A)

Ball Bearing

from

$19.99
Value-priced bearing meets all cataloged application requirements.
See More

(5 reviews)
View Product

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More
View Product

National – Shaft Repair Sleeve (Part No.99106)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

(1 reviews)
View Product

Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear)

from

$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:
  • Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
  • Intalls next to side gear
See More
View Product

Yukon Gear – Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub) (Part No.33266)

Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub)

from

$6.99
Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).

Product Features:
  • Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50
See More
View Product

Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)

Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes

from

$24.99
Product Features:
  • Axle bearing retainer for Ford 9″
  • Fits large and small bearing applications
  • 3/8″ bolt holes
  • 3 9/16″ x 2″ bolt pattern
See More
View Product

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)

Axle Bearing Retainer For Dana 44 Rear In Jeep TJ

from

$28.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 in Jeep TJ
  • 1 5/8″ x 3 3/16″ bolt pattern
  • 3/16″ bolt holes
See More
View Product

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More
View Product

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More
View Product

Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)

Fill Plug For Ford 9", 1/2" Thread

from

$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Fill plug
  • Fits Ford 9″
See More
View Product

Driveworks – Tapered Roller Bearing (Part No.S-A-9)

Tapered Roller Bearing

from

$22.79
Product Features:
  • Brand may vary by location
See More
View Product

National – Bearings (Part No.B-2610)

Bearings

from

$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing

from

$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:
  • Axle bearing
  • Fits Ford 9″
  • Conversion bearing to install small bearing axle into large bearing housing
  • 3.150″ O.D.
  • 1.377″ I.D.
See More
View Product

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint
View Product

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(12 reviews)
View Product

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

(1 reviews)
View Product

Yukon Gear – Drive Flange Cap For Dana 44, Engraved (Part No.32135)

Drive Flange Cap For Dana 44, Engraved

from

$103.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
  • Yukon engraved
See More
View Product

1971 Ford F-100 Pickup Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1971 Ford F-100 Pickup. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 43 different Drive Shafts and Axles in our inventory ranging from $4.99 to $187.99. That means you can find the exact parts or products you need to keep that 1971 Ford F-100 Pickup running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Ford F-100 Pickup. Spicer, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1971 Ford F-100 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 819 reviews in this category, some of the top rated parts include Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1971 Ford F-100 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1971 Ford F-100 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Ford F-100 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your F-100 Pickup the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1971 Ford F-100 Pickup, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

Top 1971 Ford F-100 Pickup Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1971 Ford F-100 Pickup. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Bearing
from $73.99
(17)
Multi Purpose Bearing
Drive Shaft Center Supports
Bearings
from $15.99
(9)
Bearings
Drive Shaft Bearings

FAQs for 1971 Ford F-100 Pickup Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1971 Ford F-100 Pickup?

Out of 43 Drive Shafts and Axles for the 1971 Ford F-100 Pickup, the most popular in our inventory are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Bearings
from $10.49
(4)
Bearings
Drive Shaft Bearings
Center Support Bearing Motor Mount: Center, 1 Piece
from $34.49
(1)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings

What are the top-rated 1971 Ford F-100 Pickup Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1971 Ford F-100 Pickup based on customer reviews/ratings are:
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”

More Popular Parts for All Makes