1971 Dodge D300 Pickup Differentials

Essential 1971 Dodge D300 Pickup Differentials

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Replacement Inner Slinger For Dana 60

from

$9.99
Product Features:
  • Inner oil slinger for Dana Spicer 60
See More

Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#42) Differential (Part No.13006)

Pinion Install Kit For Chrysler 8.75" (#42) Differential

from

$359.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 8.75″ ’42’ case
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Pro-King – Differential Bearing Cone (Part No.764A270)

Differential Bearing Cone

from

$35.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)

Master Overhaul Kit Dana 60 Front

from

$339.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 60 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings (Part No.14007)

Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings

from

$459.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Chrysler 8.75″ ’42’ case housing with LM104912 carrier races
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

Zip Locker Soleniod Valve

from

$99.99
Zip Locker soleniod valve.

Product Features:
  • Solenoid valve
See More

Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

9.25" Pinion Gear Thrust Washer

from

$12.99
9.25″ pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer for Chrysler 9.25″ rear
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Powr Lok Flat Drive Plate For Dana 44 (Part No.16172)

Powr Lok Flat Drive Plate For Dana 44

from

$31.99
Product Features:
  • Flat drive plate
  • Fits Dana Spicer 44 Powr Lok
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 70HD, 4.56 & Up (Part No.20037)

Replacement Standard Open Carrier Case For Dana 70HD, 4.56 & Up

from

$454.99
Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Dana Spicer 70HD
  • 4.56 and up ratio only
See More

Yukon Gear – Ring Gear Bolt For Chrysler 9.25" Rear (Part No.33033)

Ring Gear Bolt For Chrysler 9.25" Rear

from

$9.99
Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.

Product Features:
  • Ring gear bolt for Chrysler 9.25″ rear
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Carrier Installation Kit For Chrysler 9.25" Rear Differential (Part No.57001)

Carrier Installation Kit For Chrysler 9.25" Rear Differential

from

$173.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Chrysler 9.25″ rear differential. This kit contains carrier bearings and races.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Includes carrier bearings and races
See More

Yukon Gear – Differential (Part No.26044)

Differential

from

$1119.99
Differential

Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’79 And Older Chrysler 9.25" 2WD (Part No.21016)

1541H Alloy 5 Lug Rear Axle For '79 And Older Chrysler 9.25" 2WD

from

$316.99
Yukon 1541H alloy 5 lug rear axle for ’79 and older Chrysler 9.25″ 2WD with a length of 31-11/16″ and 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • 31 spline
  • 5 lug
  • 31 11/16″ long
  • Fits Chrysler 9.25″ in 1979 and down Dodge 2WD truck
See More

Motive Gear – Differential Pinion Seal (Part No.6808N)

Differential Pinion Seal

from

$24.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1106)

Differential Carrier Shim Kit

from

$18.99


Product Features:
  • CARRIER SHIM-DANA 60 & 70
See More

National – Bearings (Part No.HM88510)

Bearings

from

$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Powertrax – No-Slip Traction System (Part No.9203923125)

No-Slip Traction System

from

$579.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

    Seal Housing For Dana 60, Zip Locker, With O-Rings

    from

    $79.99
    Seal housing for Dana 60, Zip locker, with o-rings.

    Product Features:
    • Seal housing for Dana Spicer 60
    • Includes o-rings
    See More

    Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

    Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

    from

    $26.99
    Product Features:
    • Pinion nut
    • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
    See More

    Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)

    Steel Cover For Dana 60 Standard Rotation

    from

    $114.99
    Product Features:
    • Fits standard rotation Dana Spicer 60
    • Steel
    See More

    1971 Dodge D300 Pickup Differentials

    Maybe you’re in the middle of a full rebuild of that 1971 Dodge D300 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 192 different Differentials in our inventory ranging from $3.99 to $1,487.99. That means you can find the exact parts or products you need to keep that 1971 Dodge D300 Pickup running smoothly.

    Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Dodge D300 Pickup. National, Yukon Gear, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1971 Dodge D300 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 180 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Differential Ring and Pinion with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1971 Dodge D300 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1971 Dodge D300 Pickup Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Dodge D300 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your D300 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular National Differentials

    We carry National parts in our stock across Differential Pinion Pilot Bearings and Front Differential Pinion Bearings categories, plus more. For a 1971 Dodge D300 Pickup, our most popular National Differentials include:
    Shaft Repair Sleeve
    from $27.49
    (1)
    Shaft Repair Sleeve
    Differential Pinion Pilot Bearings
    Bearings
    from $9.99
    (8)
    Bearings
    Front Differential Pinion Bearings
    Bearings
    from $22.99
    (3)
    Bearings
    Differential Bearings

    Top 1971 Dodge D300 Pickup Differentials from National

    National products are another trusted brand when it comes to Differentials for your 1971 Dodge D300 Pickup. Popular National parts include:
    Taper Bearing Cone
    from $17.99
    (2)
    Taper Bearing Cone
    Differential Bearings

    FAQs for 1971 Dodge D300 Pickup Differentials

    What are the most purchased Differentials for the 1971 Dodge D300 Pickup?

    Out of 192 Differentials for the 1971 Dodge D300 Pickup, the most popular in our inventory are:
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Dana 60, Dana 70 & Dana 80 Cover Bolt
    from $5.99
    This product is not rated
    Dana 60, Dana 70 & Dana 80 Cover Bolt
    Differential Cover Bolts
    Differential Cover Gasket
    from $15.99
    (1)
    Differential Cover Gasket
    Front Housing Cover Gaskets

    What are the top-rated 1971 Dodge D300 Pickup Differentials?

    Top-rated Differentials for your 1971 Dodge D300 Pickup based on customer reviews/ratings are:
    DIFFERENTIAL GASKET
    from $8.29
    (4)
    DIFFERENTIAL GASKET
    “Great Product”
    Differential Ring and Pinion
    from $245.99
    (1)
    Differential Ring and Pinion
    “You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”