1971 Chevrolet Chevelle Performance and Racing Products

Essential 1971 Chevrolet Chevelle Performance and Racing Products

Mr. Gasket – Enhancement Products (Part No.2060)

Enhancement Products

from

$10.49
This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

Product Features:
  • Internally battled
  • High-porosity filter
  • Ideal for high performance
  • Includes rubber grommet
See More

Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)

Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet

from

$1009.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 64cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Hooker Headers – Competition Header (Part No.2466HKR)

Competition Header

from

$269.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Earls Performance Product – Solo Bleed (Part No.280021ERL)

Solo Bleed

from

$32.59


Product Features:
  • Prevents Air Inclusion
  • Direct Replacement
  • For OE Bleeders
  • One Person Bleeds Safely
  • Without The Mess
  • No Chance Of Air Bubbles
See More

Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15818)

Prebent Tailpipes - 3.00 in. Rear Exit - Pair

from

$247.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More

Competition Cams – Engine Valve Spring Kit (Part No.911-16)

Engine Valve Spring Kit

from

$759.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757

Product Features:
  • Seat pressure: 122 lbs. @ 1.900″, Open Pressure: 309 lbs. @ 1.400″
  • O.D.: 1.524″, I.D.: 1.110″
  • Single valve springs with damper
See More

MSD Ignition – Distributor; Chevy V8; Billet with Vacuum Advance (Part No.8361)

Distributor; Chevy V8; Billet with Vacuum Advance

from

$399.99
The street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any RPM. The street Pro-Billet relies on a magnetic pick-up to trigger the MSD Ignition control which delivers the powerful sparks to the coil. This pick-up is extremely accurate and never needs adjusting.

Product Features:
  • Designed for street/performance use w/mechanical or vacuum adv.
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/An HEI Style Distributor Cap And Rotor
  • Accepts Cap-A-Dapts
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
See More

Competition Cams – CAMSHAFT, SBC 268 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-210-2)

CAMSHAFT, SBC 268 HIGH ENERGY HYDRAULIC 1 EA

from

$537.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Energy Suspension – BodyMntBshKt (Part No.3.4170G)

BodyMntBshKt

from

$230.99
BodyMntBshKt

Mr. Gasket – Head Gasket (Part No.1052G)

Head Gasket

from

$75.99
Mr. Gasket Copper Head Gaskets are manufactured from dead soft solid copper that provides excellent stability and reduces cylinder bore distortion. They can be used with or without stainless steel o-rings. For supercharged, turbocharged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track applications.

Product Features:
  • Manufactured from dead soft copper
  • .020″ thick
  • Provides excellent sealing and durability
  • Conforms to and seals minor surface irregularities
  • For high performance street, drag race, oval track and turbocharged (extreme heat) applications
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.94)

Timing Cover Gasket Set

from

$21.79
Mr. Gasket Performance Gaskets are a low density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. Intended for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit.brbrThis Mr. Gasket Performance Timing Cover Gasket Kit includes the timing cover gasket and water pump gasket for your Gen IV or Gen V Chevy 396,402,427,454 Big Block.

Product Features:
  • Includes Timing Cover Gasket and Water Pump Gaskets
  • Won’t shrink or stick and provide an airtight leak proof seal
  • Engineered specifically for big block Chevys and ideal for high performance and race applications
  • Ensures optimum torque retention ideal crush resistance and excellent sheer strength using minimal clamp force yet still releases easily
See More

Edelbrock – C-26 Small Block Chevy Dual-Quad Intake Manifold (Part No.5425)

C-26 Small Block Chevy Dual-Quad Intake Manifold

from

$504.99
Product Features:
  • Designed for 1500 to 5500 RPM Performance
  • Low Profile for Hood Clearance on Most Vehicles
  • Air-Conditioning/Front Oil Tube Bosses Included
  • Stock Alternator Brackets Do Not Fit
  • Use Edelbrock Fuel Line Kit PN[8088] w/Our Carbs
  • Carburetor Center-to-Center Dimensions = 6-7/16 in
  • Use Edelbrock Linkage Kit PN[7094] w/Our Carbs
  • Best Matched with Edelbrock 500 cfm Carburetors
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

Energy Suspension – MotorMt (Part No.3.1149R)

MotorMt

from

$279.99
MotorMt

Mr. Gasket – Water Neck (Part No.9142G)

Water Neck

from

$64.99
Chrome water neck with a swivel top allows you to place your coolant hose where you want it to be, not just where the neck allows. Precision die cast for better fitment, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:
  • Chrome plated Aluminum
  • O-Ring Style To Prevent Leaks (o-ring included)
  • Swivels for Hard to Fit Applications
  • Comes With Allen Head Bolts
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Spectre – Valve Cover (Part No.5322)

Valve Cover

from

$20.99
Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 396-454 Big Block engines.

Product Features:
  • Designed for Chevrolet 396-454 Big Block engines
  • Features a triple chrome-plated finish
  • Constructed from heavy gauge steel
  • Engineered to improve valve cover seal
See More

B & M – Flexplate, 168 Tooth 400 CID (Part No.20232)

Flexplate, 168 Tooth 400 CID

from

$187.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955 to 1985 400ci small block Chevy V8 engines (externally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Mr. Gasket – Engine Sealing (Part No.6560)

Engine Sealing

from

$499.99
Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.

Product Features:
  • Made of high temp silicone or nitrile blend rubber
  • Torque limiters to prevent over tightening
  • One piece molded rubber
  • Fits left and right hand dipsticks
See More

Mr. Gasket – Timing Tab (Part No.4598)

Timing Tab

from

$15.99
Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing.

Product Features:
  • Bolts on using existing timing cover bolts
  • Chrome finish compliments chrome timing covers
  • Red adjustable pointer makes it easier to check timing
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Mr. Gasket – Intake Gasket (Part No.101B)

Intake Gasket

from

$28.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals and distributor gasket where applicable
  • For OE replacement, high performance street, drag race and oval track use
See More

MSD Ignition – Distributor Cap and Rotor; MSD/GM V8 Points (Part No.8442)

Distributor Cap and Rotor; MSD/GM V8 Points

from

$49.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Fits MSD/GM V8 Distributors
  • Made from high quality materials
  • Brass terminals
  • High dielectric properties
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1640)

Engine Valve Cover Gasket Set

from

$22.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – A/Tdipstick (Part No.9703G)

A/Tdipstick

from

$83.29
Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

Product Features:
  • Braided Stainless Steel
  • Firewall Mounting
  • Includes Oil Fill Tube
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

Richmond Gear – RngPnn (Part No.GM82411)

RngPnn

from

$185.99
RngPnn

Richmond Gear – MiniSpool (Part No.78-1230-1)

MiniSpool

from

$151.99
MiniSpool

Popular 1971 Chevrolet Chevelle Performance and Racing Products Categories

1971 Chevrolet Chevelle Performance and Racing Products

You count on your 1971 Chevrolet Chevelle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 368 Performance and Racing Products ranging in price from $5.99 to $1,009.99, you’re sure to find everything you need for your 1971 Chevrolet Chevelle.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 26 different brands like Mr. Gasket, Edelbrock, and K&N. 1971 Chevrolet Chevelle Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 15,868 extensive product reviews on 1971 Chevrolet Chevelle Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are High Performance 180 Degree Thermostat for Increased Flow with 4.2 stars and Ultra-Seal Intake Manifold Gasket with Silicone Beading with 4.3 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1971 Chevrolet Chevelle below to get started!

Top-Rated Performance and Racing Products Brands For Your 1971 Chevrolet Chevelle

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Chevrolet Chevelle running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Edelbrock, K&N, and even more.

Popular Flowtech Performance and Racing Products

You’ll find popular Flowtech brand products across Performance Exhaust Products. All are waiting to get your 1971 Chevrolet Chevelle back on the road. Some of the top-rated Flowtech products in these categories are:
Ceramic Header
from $549.99
(1)
Ceramic Header
Performance Exhaust Headers
Real-Seal; Header Gasket
from $85.39
(1)
Real-Seal; Header Gasket
Performance Exhaust Manifold Gaskets

Top-Rated Edelbrock Performance and Racing Products


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1971 Chevrolet Chevelle, and some of our most reviewed Edelbrock parts include:
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
from $26.99
(12)
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
Performance Engine Intake Manifold Gaskets

FAQs for 1971 Chevrolet Chevelle Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1971 Chevrolet Chevelle?

Out of 368 Performance and Racing Products for the 1971 Chevrolet Chevelle, the most popular in our inventory are:
High Performance Transmission Mount for Street & Racing Vehicles
from $41.99
(17)
High Performance Transmission Mount for Street & Racing Vehicles
Performance Engine and Transmission Mounts

What are the top-rated 1971 Chevrolet Chevelle Performance and Racing Products?

Top-rated Performance and Racing Products for your 1971 Chevrolet Chevelle based on customer reviews/ratings are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
“Installed in my 95 mustang perfect fit and working better than hopped or expected!!!”
Ultra-Seal Intake Manifold Gasket with Silicone Beading
from $31.99
(18)
Ultra-Seal Intake Manifold Gasket with Silicone Beading
“Can’t go wrong with Mr Gasket”
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
from $89.99
(14)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“I just installed a new crate 350 in my 1956 Bel Air. I’ve used K&N’s before and I’m looking forward to improved performance and long use with this fi”