1971 Chevrolet C10 Suburban Suspension Parts
Find Your Specific 1971 Chevrolet C10 Suburban Suspension Parts
Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 1971 C10 Suburban. Advance Auto Parts has popular C10 Suburban parts like Shocks and Struts, Air Suspension and Kits, Coil and Leaf Springs and more. You’ll also find aftermarket and OEM Suspension Parts for other C10 Suburban model years including
1967,
1968,
1969,
1970,
1972,
1973,
1974 and more. Select a category of 1971 Chevrolet C10 Suburban Suspension Parts below and start saving instantly.
Popular 1971 Chevrolet C10 Suburban Suspension Parts Categories
Essential Suspension Parts for 1971 Chevrolet C10 Suburbans
Rare Parts – U-Bolt Mounting Kit (Part No.RP19899)
from
$68.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Holds Round Lower Control Arm Shaft to the frame on Chevy & GMC Trucks
MOOG – Coil Spring Set (Part No.6101)
from
$174.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.CC603)
from
$188.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58527)
from
$123.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58241)
from
$138.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)
Hellwig – Leaf Spring Design, Rear Upper, 2500 Lb Load Capacity, Steel (Part No.61912)
from
$629.99
it is Patented Bolt-on Design, silent Ride Polyurethane Stability Blocks, Plated And Powder Coated Components And Easy To Follow Installation Instructions Make This The Helper Spring Of Choice For Do It Yourself And Professionals Alike. Manufactured With Heat Treated Alloy Spring Steel In Our California Based Facility, These Units Increase Your Vehicles Level Load Carrying Capacity Up To The manufacturer Gross Vehicle Weight Rating. With Its Progressive Rate Design This Helper Spring System Enables Trucks And Vans To Carry Loads With More Control And Stability. As Your Load Increases This Spring Automatically Increases Its Rate To Resist Sagging And Tail Dragging.
Product Features:
See More
Product Features:
- Manufactured With Heat Treated Alloy Spring Steel
- 2500 Pounds Level Load Capacity
- Progressive Rate Leaves Do Not Effect The Ride When Unloaded
- Never Needs Adjusting
- Silent Ride, With Unique Polyurethane Block Applies Tension To The U-bolts To Maintain A Quiet Ride, Also Stabilizes The Helper Spring In Reverse Or Rebound Mode
- Heavy-duty Hardware
- Simple Bolt-on Installation
Rare Parts – Spring Bushing (Part No.RP35207)
from
$36.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Heat Treated bushings
- No Squeak
- Reduces vibration
MOOG – Leaf Spring Bushing (Part No.SB351)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
KYB – Gas Shock (Part No.344068)
from
$66.99
Product Features:
See More
- KYB recommended OEM replacement shock
- Specifically calibrated to help restore the original handling and control characteristics of GM trucks
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59542)
from
$43.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
MOOG – Coil Spring Set (Part No.6082)
from
$177.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.6452)
from
$167.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)
from
$26.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)
from
$24.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Rare Parts – Control Arm Shaft Kit (Part No.RP16612)
from
$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
MOOG – Suspension Control Arm Shaft Kit (Part No.K6098)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
Rancho – Suspension Shock Absorber RS5000X (Part No.RS55118)
from
$90.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Rancho – RS7MT Suspension Shock Absorber (Part No.RS77118)
from
$101.99
Product Features:
See More
- PRECISE HANDLING AND PERFORMANCE: Deflective Disc Valving features digressive, linear or progressive tuning based on application requirements for precision handling and performance on- and off-road
- STRONG AND DURABLE: Features a 14mm hardened chrome piston rod to resist scuffs & corrosion, double-welded loops at stress areas, double strength closure method and hot form reserve tube
- HANDLES EXTREME TEMPERATURE CHANGES: Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
- REDUCES FADE: Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade
- SMOOTH PERFORMANCE: Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- THE RIGHT FIT: Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
- KEEPS DIRT AND DEBRIS OUT: Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
- BUILT TO LAST: Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling; for extra protection, purchase shock boot RS1952 or RS1961
- BOLD APPEARANCE: Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
- BUY WITH CONFIDENCE: Comes with Rancho’s Limited Warranty
KAI – Shock Mount Plate (Part No.GMK414372467L)
from
$41.99
New Goodmark Driver Side Lower Shock Mount Bracket, For 1/2 And 3/4 Ton Models
Product Features:
See More
Product Features:
- For 1/2 And 3/4 Ton Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Shock Mount Plate (Part No.GMK414372467R)
from
$41.99
New Goodmark Passenger Side Lower Shock Mount Bracket, For 1/2 And 3/4 Ton Models
Product Features:
See More
Product Features:
- For 1/2 And 3/4 Ton Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Driveworks – Control Arm Bushing (Part No.DW-K6138B)
from
$16.49
Control Arm Bushing
Dorman – Suspension Control Arm Bushing Kit (Part No.533-438)
from
$28.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – CONTROL ARM BUSHING (Part No.RP17070)
from
$31.99
CONTROL ARM BUSHING
MOOG – Coil Spring Set (Part No.6102)
from
$185.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.6454)
from
$185.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Upgrade your 1971 Chevrolet C10 Suburban with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1971 Chevrolet C10 Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your C10 Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Suspension Parts for the 1971 Chevrolet C10 Suburban, designed to meet your needs without breaking the bank.
From
Shocks and Strut
replacements to
Air Suspension and Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1971 Chevrolet C10 Suburban at great prices.
Our Suspension Parts inventory for this model
ranges from just $24.99 to $629.99, with
an average price of $103.18.
Our 35 Suspension Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1971 Chevrolet C10 Suburban without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 Chevrolet C10 Suburban, we stock popular OEM and aftermarket Suspension Parts from top names
like Valvoline, Moog, Monroe, and more.
Valvoline Suspension Parts
start at just $35.99 and boast an impressive 4.8 stars average rating from customers.
Moog and Monroe also bring quality to the table, with Suspension Parts available starting at $57.99, and at an average 4.5 stars rating.
With 1,491 customer reviews and counting, our 1971 Chevrolet C10 Suburban Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1971 Chevrolet C10 Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your C10 Suburban in top shape, all in one place.
Start shopping confidently below for your 1971 Chevrolet C10 Suburban!
Best-Selling Shocks and Struts for 1971 Chevrolet C10 Suburbans
Enhance the driving experience in your Chevrolet with 21 quality Shocks and Strut components, starting at $24.99.
Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34817)
from
$89.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – OESpectrum Suspension Shock Absorber (Part No.37049)
from
$83.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Monroe – Gas-Magnum Outer Suspension Shock Absorber (Part No.34944)
from
$79.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic Suspension Shock Absorber (Part No.59041)
from
$67.99
Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic light trucks and vans
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59542)
from
$43.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic LT Outer Suspension Shock Absorber (Part No.59571)
from
$38.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)
from
$26.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)
from
$24.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Rancho – Suspension Shock Absorber RS5000X (Part No.RS55118)
from
$90.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
KYB – Gas Shock (Part No.344068)
from
$66.99
Product Features:
See More
- KYB recommended OEM replacement shock
- Specifically calibrated to help restore the original handling and control characteristics of GM trucks
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
Monroe – OESpectrum Outer Suspension Shock Absorber (Part No.37040)
from
$79.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Rancho – RS5000X Suspension Shock Absorber (Part No.RS55120)
from
$90.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
- HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7083)
from
$71.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead
Product Features:
See More
Product Features:
- Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
- Multi Stage Velocity Sensitive Valving
- Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
- Bonded Iron Piston For Durability And Longer Shock Life
- Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
- Orifice Disk For Axle Control In Any Condition
- Red Polyurethane Bushings
Hellwig – Leaf Spring Design, Rear Upper, 2500 Lb Load Capacity, Steel (Part No.61912)
from
$629.99
it is Patented Bolt-on Design, silent Ride Polyurethane Stability Blocks, Plated And Powder Coated Components And Easy To Follow Installation Instructions Make This The Helper Spring Of Choice For Do It Yourself And Professionals Alike. Manufactured With Heat Treated Alloy Spring Steel In Our California Based Facility, These Units Increase Your Vehicles Level Load Carrying Capacity Up To The manufacturer Gross Vehicle Weight Rating. With Its Progressive Rate Design This Helper Spring System Enables Trucks And Vans To Carry Loads With More Control And Stability. As Your Load Increases This Spring Automatically Increases Its Rate To Resist Sagging And Tail Dragging.
Product Features:
See More
Product Features:
- Manufactured With Heat Treated Alloy Spring Steel
- 2500 Pounds Level Load Capacity
- Progressive Rate Leaves Do Not Effect The Ride When Unloaded
- Never Needs Adjusting
- Silent Ride, With Unique Polyurethane Block Applies Tension To The U-bolts To Maintain A Quiet Ride, Also Stabilizes The Helper Spring In Reverse Or Rebound Mode
- Heavy-duty Hardware
- Simple Bolt-on Installation
Rare Parts – Shock Absorber (Part No.RP51325)
from
$289.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle control & handling Reduces tire wear Increases the Life of Other Steering and Suspension Components
Rancho – Suspension Shock Absorber RS9000XL (Part No.RS999120)
from
$141.99
Get premium control and performance with Rancho RS9000XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on-road and off-road use, towing and more.
Product Features:
See More
Product Features:
- NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
- DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
- INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
- REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
- STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
- HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Rancho – RS7MT Suspension Shock Absorber (Part No.RS77118)
from
$101.99
Product Features:
See More
- PRECISE HANDLING AND PERFORMANCE: Deflective Disc Valving features digressive, linear or progressive tuning based on application requirements for precision handling and performance on- and off-road
- STRONG AND DURABLE: Features a 14mm hardened chrome piston rod to resist scuffs & corrosion, double-welded loops at stress areas, double strength closure method and hot form reserve tube
- HANDLES EXTREME TEMPERATURE CHANGES: Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
- REDUCES FADE: Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade
- SMOOTH PERFORMANCE: Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- THE RIGHT FIT: Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
- KEEPS DIRT AND DEBRIS OUT: Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
- BUILT TO LAST: Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling; for extra protection, purchase shock boot RS1952 or RS1961
- BOLD APPEARANCE: Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
- BUY WITH CONFIDENCE: Comes with Rancho’s Limited Warranty
Skyjacker – Black Max Shock Absorber (Part No.B8583)
from
$87.99
The performance specific internal components of Skyjacker shocks respond to the on and off road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.
Product Features:
See More
Product Features:
- Twin Tube Construction
- Advanced Foam Cell Technology
- Vehicle Specific Multi Stage Valving
- Increased Fluid Capacity For MAX Heat Dissipation
- 360 Degree Arc Welded End Mount And 180 Degree Directional Mounting
- Chrome Plated Shaft And Sintered Iron Piston
- Comes With Black Boot
KYB – High Pressure Monotube Gas Shock (Part No.KG5409)
from
$80.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- Components And Valving Designed Specifically For Gm Trucks
- Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
KAI – Shock Mount Plate (Part No.GMK414372467R)
from
$41.99
New Goodmark Passenger Side Lower Shock Mount Bracket, For 1/2 And 3/4 Ton Models
Product Features:
See More
Product Features:
- For 1/2 And 3/4 Ton Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Shock Mount Plate (Part No.GMK414372467L)
from
$41.99
New Goodmark Driver Side Lower Shock Mount Bracket, For 1/2 And 3/4 Ton Models
Product Features:
See More
Product Features:
- For 1/2 And 3/4 Ton Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Most Popular 1971 Chevrolet C10 Suburban Air Suspension and Kits
Customize your Chevrolet with 1 Air Suspension and Kits products
like Suspension Self-Leveling Unit Fluids, all
priced under $35.99.
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Top Picks for 1971 Chevrolet C10 Suburban Coil and Leaf Springs
Upgrade Chevrolet C10 Suburbans with top-quality Coil and Leaf Springs parts, including 8 OEM and aftermarket selections for your 1971 model.
MOOG – Coil Spring Set (Part No.6082)
from
$177.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58527)
from
$123.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58241)
from
$138.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)
Rare Parts – Spring Bushing (Part No.RP35207)
from
$36.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Heat Treated bushings
- No Squeak
- Reduces vibration
MOOG – Coil Spring Set (Part No.CC603)
from
$188.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.6102)
from
$185.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.6101)
from
$174.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Rare Parts – Spring Bushing (Part No.RP35985)
from
$42.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Heat Treated bushings
- No Squeak
- Reduces vibration
In-Demand Control Arms for 1971 Chevrolet C10 Suburbans
Select from 5 premium Control Arms parts for your 1971 Chevrolet C10 Suburban, with prices ranging from $26.99 to $74.99.
MOOG – Front Lower Suspension Control Arm Shaft Kit (Part No.K6147)
from
$74.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
MOOG – Suspension Control Arm Shaft Kit (Part No.K6098)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
Dorman – Suspension Control Arm (Part No.522-586)
from
$26.99
This suspension control arm shaft kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment control arm shafts on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – U-Bolt Mounting Kit (Part No.RP19899)
from
$68.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Holds Round Lower Control Arm Shaft to the frame on Chevy & GMC Trucks
Rare Parts – Control Arm Bushing (Part No.RP17422)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Top-Rated Suspension Parts Brands For Your 1971 Chevrolet C10 Suburban
Shop for the best-rated brands offering Suspension Parts and other products for your 1971 Chevrolet C10 Suburbans. Below you’ll find some of our best rated Suspension Parts from Valvoline, Moog, and Monroe, and more. Suspension Parts from these brands that fit a 1971 C10 Suburban start at just $35.99 and are rated as high as 4.8 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1971 Chevrolet C10 Suburban Suspension Parts
When it comes to maintaining or upgrading your 1971 Chevrolet C10 Suburban, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1971 Chevrolet C10 Suburban. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99. Plus, with over 17 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Moog 1971 Chevrolet C10 Suburban Suspension Parts
Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 1971 Chevrolet C10 Suburban owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1971 C10 Suburban, Advance Auto Parts carries a full inventory of 3 Moog Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Moog Suspension Parts range from $57.99 to $177.99, plus, with more than 3 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
FAQs for 1971 Chevrolet C10 Suburban Suspension Parts
Which Suspension Parts are best-sellers for 1971 Chevrolet C10 Suburbans?
Out of 35 Suspension Parts that fit 1971 Chevrolet C10 Suburbans, the following parts are the top sellers:
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Gas-Matic LT Suspension Shock Absorber (5900308) – $43.99
- Gas-Matic LT Outer Suspension Shock Absorber (5900334) – $38.99
What’s the price range for 1971 Chevrolet C10 Suburban Suspension Parts?
Suspension Part prices for the 1971 Chevrolet C10 Suburban start at $24.99 and go up to $629.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1971 Chevrolet C10 Suburban?
The average price for Suspension Parts for the 1971 Chevrolet C10 Suburban is $103.18. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Chevrolet C10 Suburban model years?
What are the cheapest Suspension Parts for my 1971 Chevrolet C10 Suburban?
The cheapest 1971 Chevrolet C10 Suburban Suspension Parts we carry in stock are:
- Shock-Mate Suspension Shock Absorber Bellows (5100009) – $24.99
- Suspension Control Arm (11469035) – $26.99
- Shock-Mate Suspension Shock Absorber Bellows (15740047) – $26.99
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Spring Bushing (20512922) – $36.99
What are the top-rated Suspension Parts that fit the 1971 Chevrolet C10 Suburban?
Out of 1,491 reviews by customers, our 1971 Chevrolet C10 Suburban Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1971 Chevrolet C10 Suburban and their top-rated products:
- Shocks and Struts
- Gas-Magnum Outer Suspension Shock Absorber (18570135) – $79.99
- Gas-Magnum Suspension Shock Absorber (18570124) – $89.99
- OESpectrum Suspension Shock Absorber (19710502) – $83.99
- Coil and Leaf Springs
- Gas-Magnum Outer Suspension Shock Absorber (18570135) – $79.99
- Gas-Magnum Suspension Shock Absorber (18570124) – $89.99
- OESpectrum Suspension Shock Absorber (19710502) – $83.99
- Control Arms
- Gas-Magnum Outer Suspension Shock Absorber (18570135) – $79.99
- Gas-Magnum Suspension Shock Absorber (18570124) – $89.99
- OESpectrum Suspension Shock Absorber (19710502) – $83.99
What types of Suspension Parts do you sell for my 1971 Chevrolet C10 Suburban?
As of 11/2/25, these are some of the most in-demand types of Suspension Parts for a 1971 Chevrolet C10 Suburban:
Can I get help with 1971 Chevrolet C10 Suburban Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.
What is your return policy for Chevrolet C10 Suburban Suspension Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet C10 Suburban Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
