1970 Ford Fairlane Exhaust Parts
More 1970 Ford Fairlane Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1970 Ford Fairlane, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1970 Ford Fairlane Exhaust Parts
Remflex – Flexible Graphite, Set Of 2, 1-9/16 Inch X 2-5/16 Inch Square Port Size (Part No.3008)
from
$44.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Taylor Gaskets – Header Gasket (Part No.66091)
from
$48.99
Header Gasket
Hooker Headers – Super Competition Header Gasket (Part No.10877HKR)
from
$23.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18230)
from
$95.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.52456)
from
$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Felpro – Exhaust Pipe Flange Gasket (Part No.9827)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.9802)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60985)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (Part No.03099)
from
$9.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Hooker Headers – Competition Header (Part No.6920-1HKR)
from
$753.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Patriot Exhaust – H8411 1 3/4" Full Length Header Ford Mustang 351C 67-70 Raw (Part No.H8411)
from
$309.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8411 1 3/4″ Full Length Header Ford Mustang 351C 67-70 Raw
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Patriot Exhaust – H8403-1 1 5/8" Full Length Header Ford Mustang Small Block Ford 64-73 Coated (Part No.H8403-1)
from
$585.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8403-1 1 5/8″ Full Length Header Ford Mustang Small Block Ford 64-73 Coated
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Patriot Exhaust – H8407-1 1 3/4" Full Length Header Ford Mustang 351C 64-70 Coated (Part No.H8407-1)
from
$496.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8407-1 1 3/4″ Full Length Header Ford Mustang 351C 64-70 Coated
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Felpro – Exhaust Manifold Heat Shield Set (Part No.MS 90256)
from
$36.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Heat Shield Set (Part No.MS 95000)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310070)
from
$85.99
Vibe Lock Header Bolt Kit
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
Mr. Gasket – Exhsthdrbolt (Part No.2231G)
from
$56.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 16 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Popular 1970 Ford Fairlane Exhaust Parts Categories
1970 Ford Fairlane Exhaust Parts
You count on your 1970 Ford Fairlane to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 51 Exhaust Parts ranging in price from $2.49 to $789.99, you’re sure to find everything you need for your 1970 Ford Fairlane.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Felpro, Walker, and Dorman. 1970 Ford Fairlane Exhaust Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,498 extensive product reviews on 1970 Ford Fairlane Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Sound Solution Muffler with 4.2 stars and Terminator; Exhaust Tips with 4.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1970 Ford Fairlane below to get started!
Top-Rated Exhaust Parts Brands For Your 1970 Ford Fairlane
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1970 Ford Fairlane running right for years to come. In our inventory you’ll find brands like Felpro, Walker, Dorman, and even more.
Popular Mr. Gasket Exhaust Parts
You’ll find popular Mr. Gasket brand products across Exhaust Gaskets. All are waiting to get your 1970 Ford Fairlane back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Top-Rated Taylor Gaskets Exhaust Parts
If Taylor Gaskets are what you’re looking for, our inventory holds plenty. We stock Taylor Gaskets brand Exhaust Parts for your 1970 Ford Fairlane, and some of our most reviewed Taylor Gaskets parts include:
FAQs for 1970 Ford Fairlane Exhaust Parts
What are the most purchased Exhaust Parts for the 1970 Ford Fairlane?
Out of 51 Exhaust Parts for the 1970 Ford Fairlane, the most popular in our inventory are:
What are the top-rated 1970 Ford Fairlane Exhaust Parts?
Top-rated Exhaust Parts for your 1970 Ford Fairlane based on customer reviews/ratings are:
from
$25.99
(3)
Exhaust Manifold Gasket Set
“These gaskets fit the bill for a 1970 Ford F100 with a 360 in it.”
