from

$41.99

Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:

PerTronix D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap for Flame-Thrower distributors.

from

$13.49

Distributor Cap and Rotor Kit

from

$41.99

Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:

PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$83.39

MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Interstitial carbide improves wear resistance/running properties
Melonite QPQ coated reduces friction and initial wear
Proprietary formulated ductile iron.
Micro Polished Surface For Smooth Contact

from

$42.49

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$19.29

This distributor drive gear is designed to match the fit, function and appearance of the original part on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this distributor drive gear matches the fit, function and appearance of the factory part on specified years, make and models
Ideal solution – this drive gear is a reliable replacement for an original part that has failed due to moisture infiltration or vibration
Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.49

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$46.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$48.49

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$18.99

Product Features:

PerTronix D702700 Vacuum Lockout Kit for PerTronix Flame-Thrower Clockwise Billet Distributor
Replacement Part (only) for PerTronix Flame Thrower Distributors

from

$46.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$9.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$1.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$762.99

The e-curve distributor will drop right in your Ford 289/302 and fire up its performance. The e-curve distributor features a digital control module that manages the timing curve replacing the centrifugal advance springs and weights. This module lets you select from nearly 100 different advance curves, including a vacuum advance by turning two rotary dials. You can also set an rpm limit that will protect your engine from overrev damage caused by a missed shift or driveline failure. These distributors are also fit with a high-output ignition module so there is no need to run an external ignition box. This combination makes these distributors ideal for restored muscle cars and street rods to keep a stock or clean appearance under the hood. The e-curve distributor is topped with MSD’s rynite molded cap and rotor and is supplied with a heavy-duty gear and a matching 3-pin weathertight wiring harness.

Product Features:

Digitally controlled; stand-alone distributor.
Adjustable Electronic Advance w/Vacuum Advance
Select up to 100 different curves through two rotary dials
High output ignition module for a powerful spark
Set a rev limit to protect your engine from overrev damage

from

$532.99

When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also QPQ-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place!

Product Features:

Drop in billet replacement for late model Ford TFI 5.8L dist.
Supplied w/steel gear to work w/factory roller camshafts
Factory style ignition module connector accepts factory wiring
CNC machined billet aluminum housing and billet aluminum base
QPQ coated polished steel shaft; guided by sealed ball bearings
Supplied w/Late Model Distributor Cap And Rotor
Legal to install in all 50 states

from

$379.99

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

PerTronix D130801 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$593.99

When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art computer numerical control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire RPM range of your engine. The shaft is also quip-coated for friction reduction and corrosion resistance. The Pro-Billet distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a special gear to work with the?factory camshafts.

Product Features:

Drop in billet replacement for late model Ford TFI 5.8L dist.
Supplied w/steel gear to work w/factory roller camshafts
Factory style ignition module connector accepts factory wiring
CNC machined billet aluminum housing and billet aluminum base
QPQ coated polished steel shaft; guided by sealed ball bearings
Supplied w/Late Model Distributor Cap And Rotor
Legal to install in all 50 states

from

$83.29

MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Interstitial carbide improves wear resistance/running properties
Melonite QPQ coated reduces friction and initial wear
Proprietary formulated ductile iron.
Micro Polished Surface For Smooth Contact

from

$27.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$131.99

A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$143.99

A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$73.29

Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:

Replacement Distributor Gear

from

$9.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$11.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$4.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$4.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features: