1969 Jaguar XJ Steering and Chassis Parts
More 1969 Jaguar XJ Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1969 Jaguar XJ, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1969 Jaguar XJ Steering and Chassis Parts
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36197)
from
$44.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rein – Power Steering Rack Boot Kit (Part No.BKK0141)
from
$10.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
Beck/Arnley – Steering Rack Boot Kit (Part No.103-2734)
from
$31.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Cardone – Power Steering Filter (Part No.20-0058F)
from
$42.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$41.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Pressure Hose Assembly (Part No.36214)
from
$82.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.18520)
from
$21.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
APA/URO Parts – Steering Rack Mount (Part No.M106037373APA)
from
$6.81
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Steel outer – neoprene inner – with steel center sleeve (as OE original) C29406 Washer May Also be Required
See More
Lemfoerder – OE Replacement Ball Joint (Part No.L202037407LEM)
from
$84.99
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
MTC – Subframe Mount (Part No.L100586463MTC)
from
$24.15
The MTC Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MTC – Subframe Mount (Part No.L100541441MTC)
from
$17.20
The MTC Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)
from
$5.99
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$33.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Lemfoerder – Tie Rod End (Part No.M3010380540LEM)
from
$88.23
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Rare Parts – Tie Rod End (Part No.RP28993)
from
$74.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Meyle – Tie Rod End (Part No.M3010945983MEY)
from
$49.48
Meyle tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Meyle tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Lemfoerder – Tie Rod End (Part No.M3010380539LEM)
from
$90.21
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Popular 1969 Jaguar XJ Steering and Chassis Parts Categories
1969 Jaguar XJ Steering and Chassis Parts
You count on your 1969 Jaguar XJ to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 21 Steering and Chassis Parts ranging in price from $2.49 to $84.99, you’re sure to find everything you need for your 1969 Jaguar XJ.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 11 different brands like Carquest Premium, Cardone, and National. 1969 Jaguar XJ Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 345 extensive product reviews on 1969 Jaguar XJ Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Subframe Mount with 4.3 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1969 Jaguar XJ below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1969 Jaguar XJ
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 Jaguar XJ running right for years to come. In our inventory you’ll find brands like Carquest Premium, Cardone, National, and even more.
Popular Carquest Premium Steering and Chassis Parts
You’ll find popular Carquest Premium brand products across Power Steering Parts. All are waiting to get your 1969 Jaguar XJ back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1969 Jaguar XJ, and some of our most reviewed Cardone parts include:
FAQs for 1969 Jaguar XJ Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1969 Jaguar XJ?
Out of 21 Steering and Chassis Parts for the 1969 Jaguar XJ, the most popular in our inventory are:
from
$5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
from
$2.49
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Reservoir Hoses
What are the top-rated 1969 Jaguar XJ Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1969 Jaguar XJ based on customer reviews/ratings are:
from
$24.15
(3)
Subframe Mount
“I bought one of these back in 2014 for my 2013 ZL1 and I still love it, it really makes the cars supercharger sound really aggressive when you add a l”
