1969 GMC G25/G2500 Van Drivetrains
More 1969 GMC G25/G2500 Van Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1969 GMC G25/G2500 Van, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1969 GMC G25/G2500 Van Drivetrains
Pro-King – Differential Pinion Shim Kit (Part No.742G202)
from
$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Multi Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)
from
$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Differential (Part No.26052)
from
$709.99
Differential
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Felpro – Differential Cover Gasket (Part No.RDS 55028-1)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Positraction Pinion Gear Thrust Washer With Step-Lip Inside For GM 12P And 12T – Fits New Eatons (Part No.33382)
from
$14.99
Positraction pinion gear thrust washer with step-lip inside for GM 12P and 12T. fits new Eatons.
Product Features:
See More
Product Features:
- Pinion gear thust washer for GM 12 bolt passenger car and truck
- Fits positraction designs only
- Has inside lip
Yukon Gear – Dura Grip Positraction For GM 12 Bolt Truck With 30 Spline Axles, 3.73 & Up (Part No.26035)
from
$859.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt truck with 30 spline axles
- 3.73 and up ratio only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)
from
$15.99
Standard open side gear thrust washer for 8.5″ GM.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 8.5″
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG Driveline Products – Universal Joint Strap Kit (Part No.492-10)
from
$15.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 330, 330A, 331 & 331A
- Contains two 1.66″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
Yukon Gear – Positraction Clutch Guide (Part No.33352)
from
$8.99
Positraction clutch guide.
Product Features:
See More
Product Features:
- Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
- Compatible with Dura Grip positractions only
Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)
from
$404.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Carbon fiber clutches
National – Bearings (Part No.HM89449)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Spider Gear Kit For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16043)
from
$207.99
Yukon standard open spider gear kit for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – GM 12 Bolt Truck Cover Gasket (Part No.23015)
Yukon Gear – Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design (Part No.41085)
from
$198.99
Yukon yoke for GM 12 bolt car & truck, 1310 u/joint size, u-bolt design. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
USA Standard Gear – Spartan Locker For GM 8.5" With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17041)
from
$649.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits GM 18.5″ with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Pro-King – Differential Pinion Seal (Part No.742G070)
from
$4.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)
from
$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck and 8.6″
- Includes carrier bearings and races and “super” carrier shim kit
Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)
from
$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
- Includes carrier bearings and races and “super” carrier shim kit
Popular 1969 GMC G25/G2500 Van Drivetrains Categories
1969 GMC G25/G2500 Van Drivetrains
You count on your 1969 GMC G25/G2500 Van to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 189 Drivetrains ranging in price from $4.49 to $1,674.99, you’re sure to find everything you need for your 1969 GMC G25/G2500 Van.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Moog, Valvoline, and National. 1969 GMC G25/G2500 Van Drivetrains start as low as $4.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,832 extensive product reviews on 1969 GMC G25/G2500 Van Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Bearings with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1969 GMC G25/G2500 Van below to get started!
Top-Rated Drivetrains Brands For Your 1969 GMC G25/G2500 Van
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 GMC G25/G2500 Van running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1969 GMC G25/G2500 Van back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1969 GMC G25/G2500 Van Drivetrains
What are the most purchased Drivetrains for the 1969 GMC G25/G2500 Van?
Out of 189 Drivetrains for the 1969 GMC G25/G2500 Van, the most popular in our inventory are:
What are the top-rated 1969 GMC G25/G2500 Van Drivetrains?
Top-rated Drivetrains for your 1969 GMC G25/G2500 Van based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
from
$16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
