1969 Ford LTD Fuel and Emissions Systems
Find Your Specific 1969 Ford LTD Fuel and Emissions Systems
Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 1969 LTD. Advance Auto Parts has popular LTD parts like Fuel Injectors, Fuel Pumps, Exhaust Gas Recirculation (EGR) Parts and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other LTD model years including
1983,
1984,
1985,
1986,
1987,
1988,
1989,
1990,
1991 and more. Select a category of 1969 Ford LTD Fuel and Emissions Systems below and start saving instantly.
Popular 1969 Ford LTD Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1969 Ford LTDs
Carquest Premium – Locking Fuel Tank Cap (Part No.10591)
from
$23.99
Product Features:
See More
- Protects your fuel from theft and vandalism
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Tank Cap (Part No.10582)
from
$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)
from
$10.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Independently tested for emission control
- Independently tested for emission control
- Protects your fuel from theft and vandalism
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Edelbrock – EGR Valve Spacer Plate #3898 For Ford Big-Block 4V (Part No.3898)
from
$20.99
Product Features:
See More
- Composite Material
- 4-Hole Gasket Type
- Includes 4-Hole Steel Plate-To-Intake Manifold Gasket
- Includes EGR Spacer-To-Four Hole Steel Plate Gasket
- For Use With Part #3721, 3723, 3771, 3781, And 3783
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35960 For Ford BB FE 390-428 (Part No.35960)
from
$2914.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35960 for Ford FE 390-428 C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35940 For Ford SB Windsor 289, 302 (Part No.35940)
from
$2571.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35940 for Small-Block Ford 289W-347W C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pf4 Fuel Injection Kit Sequential Port BBF 429/460 1968 To 1987 675Max Hp 42 Lbhr Injectors Satin (Part No.35680)
from
$2483.99
The Edelbrock Pro-Flo 4 EFI Kit No. 35680 for Ford big-block 429-460 engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors, wire harnesses and ECU are included along with a full-color installation manual. The Super Victor EFI manifold is designed with a larger cross-sectional area in the plenum with longer runners for high-horsepower and/or large cubic-inch applications. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35930 For Ford SB Windsor 289, 302 (Part No.35930)
from
$2542.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35930 for Small-Block Ford 289W-302W C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35950 For Ford SB Windsor 351 (Part No.35950)
from
$2542.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35950 for Small-Block Ford 351W C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Dorman – Fuel Pump Lock Ring (Part No.579-004)
from
$14.99
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Fuel Tank Lock Ring (Part No.LO1511469)
from
$21.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications.
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
Dorman – Help – Fuel Sending Unit Retainer Kit (Part No.55811)
from
$14.99
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Fuel Sending Unit Retainer Assortment (Part No.55812)
from
$17.29
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Fuel Pump Lock Ring (Part No.579-003)
from
$10.49
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Holley – Mechanical Fuel Pump (Part No.12-833)
from
$139.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Various Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Holley – Mechanical Fuel Pump (Part No.12-390-11)
from
$241.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 110 gph Free Flow
- Shutoff Pressure Pre-Set From 6.5 To 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
- Inlet/Outlet Tapped For 3/8 in. NPT
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.2541142)
from
$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Edelbrock – Victor Series fuel pump is for 289-351W Ford (Part No.1715)
from
$192.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Edelbrock – Performer RPM Series fuel pump is for 352-428 FE Ford (Part No.1724)
from
$190.99
Edelbrock part #1724 Performer RPM Series fuel pump is for 352-428 FE Ford designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage polis
See More
Delphi – Electric Fuel Pump: Extra Fitting, Formed Hose, Hose Clamps, Terminal Hardware (Part No.FD0013)
from
$119.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Upgrade your 1969 Ford LTD with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1969 Ford LTD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your LTD functioning at its best. At Advance Auto Parts, we offer a wide selection of 29 Fuel and Emissions Systems for the 1969 Ford LTD, designed to meet your needs without breaking the bank.
From
Fuel Injector
replacements to
Fuel Pumps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1969 Ford LTD at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $3.99 to $2,914.99, with
an average price of $305.84.
Our 29 Fuel and Emissions Systems in stock come from 7 trusted brands, so you’re sure to find the right part for your 1969 Ford LTD without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1969 Ford LTD, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Felpro Edelbrock, and more.
Felpro Fuel and Emissions Systems
start at just $3.99 and boast an impressive 4.6 stars average rating from customers.
With 427 customer reviews and counting, our 1969 Ford LTD Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1969 Ford LTD is always ready to roll. We’re committed to providing you with everything you need to keep your LTD in top shape, all in one place.
Start shopping confidently below for your 1969 Ford LTD!
Best-Selling Fuel Injectors for 1969 Ford LTDs
Enhance the driving experience in your Ford with 5 quality Fuel Injector components, starting at $2,483.99.
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35960 For Ford BB FE 390-428 (Part No.35960)
from
$2914.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35960 for Ford FE 390-428 C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35940 For Ford SB Windsor 289, 302 (Part No.35940)
from
$2571.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35940 for Small-Block Ford 289W-347W C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35950 For Ford SB Windsor 351 (Part No.35950)
from
$2542.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35950 for Small-Block Ford 351W C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35930 For Ford SB Windsor 289, 302 (Part No.35930)
from
$2542.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35930 for Small-Block Ford 289W-302W C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Edelbrock – Pf4 Fuel Injection Kit Sequential Port BBF 429/460 1968 To 1987 675Max Hp 42 Lbhr Injectors Satin (Part No.35680)
from
$2483.99
The Edelbrock Pro-Flo 4 EFI Kit No. 35680 for Ford big-block 429-460 engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors, wire harnesses and ECU are included along with a full-color installation manual. The Super Victor EFI manifold is designed with a larger cross-sectional area in the plenum with longer runners for high-horsepower and/or large cubic-inch applications. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Most Popular 1969 Ford LTD Fuel Pumps
Customize your Ford with 19 Fuel Pumps products
like Fuel Pumps and
Fuel Pump Block-Off Plate Gaskets, all
priced under $255.99.
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Holley – Mechanical Fuel Pump (Part No.12-289-11)
from
$185.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 110 gph Free Flow
- Shutoff Pressure Pre-Set From 6.5 To 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
- Inlet/Outlet Tapped For 3/8 in. NPT
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.2541147)
from
$33.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Holley – Mechanical Fuel Pump (Part No.12-833)
from
$139.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Various Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.3541144)
from
$27.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.3541157)
from
$34.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.2541145)
from
$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Holley – Mechanical Fuel Pump (Part No.12-460-11)
from
$204.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 110 gph Free Flow
- Shutoff Pressure Pre-Set From 6.5 To 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
- Inlet/Outlet Tapped For 3/8 in. NPT
Edelbrock – Victor Series fuel pump is for 289-351W Ford (Part No.1715)
from
$192.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Holley – Mechanical Fuel Pump (Part No.12-289-13)
from
$235.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 130+ gph Free Flow
- Shutoff Pressure Pre-Set From 7.5 To 9 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-289-20)
from
$255.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170+ gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
Holley – Mechanical Fuel Pump (Part No.12-390-11)
from
$241.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 110 gph Free Flow
- Shutoff Pressure Pre-Set From 6.5 To 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
- Inlet/Outlet Tapped For 3/8 in. NPT
Edelbrock – Victor Series fuel pump is for 429/460 Ford (Part No.1718)
from
$239.99
Edelbrock part #1715 Victor Series fuel pump is for 429/460 Ford. The Edelbrock Victor Series fuel pump is a must for drag racing, circle track racing, street machines or any application that demands a high-volume fuel delivery, these fuel pumps feature a
See More
Edelbrock – Performer RPM Series fuel pump is for 429/460 Ford (Part No.1726)
from
$227.99
Product Features:
See More
- Mechanical Operation
- Fuel Sending Unit Not Included
- For Big-Block 429-460 Ford Engines
- In Tank Mounting Type
- 110 GPH
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.3542725)
from
$201.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Edelbrock – Performer RPM Series fuel pump is for 352-428 FE Ford (Part No.1724)
from
$190.99
Edelbrock part #1724 Performer RPM Series fuel pump is for 352-428 FE Ford designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage polis
See More
Top Street Performance – Black Ford Small Block V8 (221-351W) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1007BK)
from
$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 80 GPH
- Pressure: 6 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 1/4 in NPT Female
Top Street Performance – Ford FE Big Block V8 (390-428) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1008C)
from
$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 80 GPH
- Pressure: 6 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 1/4 in NPT Female
Top Street Performance – Ford Small Block V8 (221-351W) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1007C)
from
$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.
Product Features:
See More
Product Features:
- Free Flow: 80 GPH
- Pressure: 6 PSI
- Housing Material: Aluminum
- Inlet and Outlet: 1/4 in NPT Female
Top Picks for 1969 Ford LTD Exhaust Gas Recirculation (EGR) Parts
Upgrade Ford LTDs with top-quality Exhaust Gas Recirculation (EGR) Parts parts, including 1 OEM and aftermarket selections for your 1969 model.
Edelbrock – EGR Valve Spacer Plate #3898 For Ford Big-Block 4V (Part No.3898)
from
$20.99
Product Features:
See More
- Composite Material
- 4-Hole Gasket Type
- Includes 4-Hole Steel Plate-To-Intake Manifold Gasket
- Includes EGR Spacer-To-Four Hole Steel Plate Gasket
- For Use With Part #3721, 3723, 3771, 3781, And 3783
In-Demand Gas Caps for 1969 Ford LTDs
Select from 2 premium Gas Caps parts for your 1969 Ford LTD, with prices ranging from $10.99 to $28.99.
Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10640)
from
$10.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Tank Cap (Part No.10491)
from
$28.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Most Sold 1969 Ford LTD Fuel Tanks
Explore our best-selling Ford parts for the 1969 LTD among 2 OEM and aftermarket options starting from $10.49.
Dorman – Fuel Pump Lock Ring (Part No.579-003)
from
$10.49
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
- Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Top-Rated Fuel and Emissions Systems Brands For Your 1969 Ford LTD
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1969 Ford LTDs. Below you’ll find some of our best rated Fuel and Emissions Systems from Felpro and Edelbrock, and more. Fuel and Emissions Systems from these brands that fit a 1969 LTD start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1969 Ford LTD Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1969 Ford LTD, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Fuel and Emissions Systems, specifically designed for the 1969 Ford LTD. With over 1 Felpro brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99. Plus, with over 26 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Edelbrock 1969 Ford LTD Fuel and Emissions Systems
Edelbrock auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1969 Ford LTD owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1969 LTD, Advance Auto Parts carries a full inventory of 1 Edelbrock Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Edelbrock Fuel and Emissions Systems range up to $20.99, plus, with more than 1 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
FAQs for 1969 Ford LTD Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1969 Ford LTDs?
Out of 29 Fuel and Emissions Systems that fit 1969 Ford LTDs, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Mechanical Fuel Pump: Includes Gasket (11763327) – $27.99
- Mechanical Fuel Pump: Includes Gasket (11764061) – $33.99
What’s the price range for 1969 Ford LTD Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1969 Ford LTD start at $3.99 and go up to $2,914.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1969 Ford LTD?
The average price for Fuel and Emissions Systems for the 1969 Ford LTD is $305.84. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford LTD model years?
What are the cheapest Fuel and Emissions Systems for my 1969 Ford LTD?
The cheapest 1969 Ford LTD Fuel and Emissions Systems we carry in stock are:
- Fuel Pump Mounting Gasket (5183804) – $3.99
- Fuel Pump Lock Ring (22972944) – $10.49
- Non-Locking Fuel Tank Cap (18481485) – $10.99
- Fuel Tank Cleaning Kit (11692237) – $12.49
- EGR Valve Spacer Plate #3898 For Ford Big-Block 4V (22340837) – $20.99
What are the top-rated Fuel and Emissions Systems that fit the 1969 Ford LTD?
Out of 427 reviews by customers, our 1969 Ford LTD Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1969 Ford LTD and their top-rated products:
- Exhaust Gas Recirculation (EGR) Parts
- EGR Valve Spacer Plate #3898 For Ford Big-Block 4V (22340837) – $20.99
- Gas Caps
- EGR Valve Spacer Plate #3898 For Ford Big-Block 4V (22340837) – $20.99
What types of Fuel and Emissions Systems do you sell for my 1969 Ford LTD?
As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 1969 Ford LTD:
Can I get help with 1969 Ford LTD Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.
What is your return policy for Ford LTD Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Ford LTD Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
