1969 Ford Galaxie Differentials

Name: Pilot Bearing Retainer For Ford 9"
Brand: Yukon Gear
SKU: 33255
Price: 11.99 USD

Find your specific 1969 Ford Galaxie original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1969 Ford Galaxie Differentials

from

$11.99

Pilot bearing retainer for Ford 9″.

Product Features:

Pilot bearing retainer for Ford 9″

from

$347.99

Product Features:

FRD 10BLT 9.0 R/P 6.33AX MGP

from

$4.99

Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:

Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″

from

$4.99

Trac Loc clutch guide for 9″ Ford.

Product Features:

Clutch guide
Fits Ford 8″ and 9″

from

$225.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Ford 9″ with Daytona pinion support
Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.

from

$10.99

Product Features:

Trac Loc spring plate for Ford 8″ and 9″

from

$198.99

Product Features:

Spider gear kit
Fits Ford 8″ and 9″ 28 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$5.99

This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
Required replacement – when servicing the differential
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$51.99

Flat side gear without hub for 8″ and 9″ Ford with 28 splines.

Product Features:

Side gear without hub
Fits Ford 8″ and 9″ Trac Loc positraction with 28 spline axles

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$264.99

9″ standard Open case, bare, 28 & 31 spline, 2 or 4 pinion.

Product Features:

Standard open carrier case
Fits Ford 9″ with 28 or 31 spline axles
Does not include spider gears

from

$43.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$31.99

Product Features:

MINI SPOOL 8″ & 9″ 31 SPLN STL 090431

from

$569.99

Ford 9″ pinion Support, 35 spline, 10 hole, no races included.

Product Features:

Fits Ford 9″ with 35 spline pinion
Larger inner pinion bearing reduces gear deflection under high load
6061 aluminum
10 bolt holes
Does not include races

from

$213.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 9″ with LM102910 carrier race
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, thread locker, marking compound with brush and gasket.

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$219.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M88010 race
All steel construction

from

$4.99

STAR washers, 3.062″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:

Star washer
Fits Ford 9″
3.062″ designs only

from

$16.99

Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.

Product Features:

Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
Fits standard open differentials only
0.750″ diameter

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$324.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses carrier bearings & races with an I.D. of 1.780″ and an O.D. of 3.062″. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Ford 9″ with LM603011 carrier races
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, pilot bearing, thread locker, marking compound with brush, and gasket.

from

$789.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:

Fits Ford 9″ with 31 spline axles
Trac Loc positraction
Clutch style positraction
Street design
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$15.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

Popular 1969 Ford Galaxie Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Bearings

Differential Pinion Pilot Bearings

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Mini Spools

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Pinion Supports

Rear Differential Pinion Bearings

Differential Spools

Differential Lock Springs

Differential Carrier Bearing Adjusters

Automatic Transmission Differential Cover Gaskets

Differential Pinion Bearing Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Lock Washers

Differential Pinion Bearing Spacers

Differential Bearing Adjuster Nut Lock Bolts

Differential Carrier Bearing Races

Maybe you’re in the middle of a full rebuild of that 1969 Ford Galaxie. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 326 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1969 Ford Galaxie running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Ford Galaxie. Driveworks, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1969 Ford Galaxie, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 78 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and Bearings with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1969 Ford Galaxie rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1969 Ford Galaxie Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Ford Galaxie demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Galaxie the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1969 Ford Galaxie, our most popular Felpro Differentials include:

from $8.49

(9)

Differential Carrier Gasket

Automatic Transmission Differential Cover Gaskets

Top 1969 Ford Galaxie Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1969 Ford Galaxie. Popular Driveworks parts include:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $4.29

(1)

Oil Seal

Differential Pinion Seals

from $4.79

(1)

Oil Seal

Differential Pinion Seals

FAQs for 1969 Ford Galaxie Differentials

What are the most purchased Differentials for the 1969 Ford Galaxie?

Out of 326 Differentials for the 1969 Ford Galaxie, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $23.99

(7)

Bearings

Front Differential Pinion Bearings

from $5.99

This product is not rated

Pinion Crush Sleeves

Differential Crush Sleeves

What are the top-rated 1969 Ford Galaxie Differentials?

Top-rated Differentials for your 1969 Ford Galaxie based on customer reviews/ratings are:

from $15.79

(3)

Multi Purpose Seal

“good quality”

from $38.49

(2)

Bearings

“nice finish and function. Should perform well.”

from $551.99

(1)

No-Slip Traction System

“Installed, no issues, works great.”

1969 Ford Galaxie Differentials

More 1969 Ford Galaxie Differentials

Essential 1969 Ford Galaxie Differentials

Yukon Gear – Pilot Bearing Retainer For Ford 9" (Part No.33255)

Motive Gear – Performance Differential Ring and Pinion (Part No.F890633AX)

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)

Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

USA Standard Gear – Standard Spider Gear Set For Ford 8" & 9", 28 Spline, 2-Pinion Design (Part No.39017)

Dorman – Help – Pinion Crush Sleeves (Part No.81056)

Yukon Gear – Flat Side Gear Without Hub For 8" And 9" Ford With 28 Splines (Part No.16164)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – Standard Open Carrier Case – Ford 9" (Part No.20078)

National – Shaft Repair Sleeve (Part No.99193)

National – Bearings (Part No.M802048)

National – Bearings (Part No.M86610)

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Yukon Gear – Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included (Part No.32165)

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM102910 Differential, with Solid Spacer (Part No.37034)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Bearing Race Driver (Part No.56023)

Yukon Gear – Star Washers, 3.062" Ford 9" Drop Out New Design Only (Part No.32143)

Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Master Overhaul Kit For Ford 9" Lm603011 Differential And Crush Sleeve Eliminator (Part No.14157)

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Street Design (Part No.26010)

Felpro – Differential Carrier Gasket (Part No.RDS 13270)

Motive Gear – Differential Pinion Shim Kit (Part No.WAA4663)

Popular 1969 Ford Galaxie Differentials Categories