1964 Ford Galaxie Differentials

Essential 1964 Ford Galaxie Differentials

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)

Pinion Install Kit For Ford Daytona 9" Differential

from

$225.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with Daytona pinion support
  • Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design (Part No.39018)

Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design

from

$249.99
Product Features:
  • Spider gear kit
  • Fits Ford 9″ 31 spline open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
See More

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Aggressive Design (Part No.26009)

Trac Loc For Ford 9" Wtih 31 Spline Axles - Aggressive Design

from

$784.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Aggressive design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Trac Loc Spring For Ford 9" & 8"

from

$8.99
Product Features:
  • Trac Loc spring for Ford 8″ and 9″
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1011-B)

RngPnnInstlKt

from

$48.99
RngPnnInstlKt

Yukon Gear – Extra HD 3.062" Nodular Iron Dropout For Ford 9" (Part No.32099)

Extra HD 3.062" Nodular Iron Dropout For Ford 9"

from

$615.99
Yukon Extra HD 3.062″ nodular Iron dropout for Ford 9″. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Rated up to 1200HP!

Product Features:
  • Fits Ford 9″
  • 3.062″ carrier race diameter
  • Nodular iron for added strength
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – Pinion Depth Shims For Ford 9" (Part No.55056)

Pinion Depth Shims For Ford 9"

from

$26.99
Pinion depth shim kit 9″ Ford.

Product Features:
  • Pinion depth shims for Ford 9″
See More

USA Standard Gear – Spartan Locker For Ford 9", 28 Or 31 Spline (Part No.17042)

Spartan Locker For Ford 9", 28 Or 31 Spline

from

$579.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit uses the factory side gears.

Product Features:
  • Fits Ford 8″ and 9″ with 28 or 31 spline axles
  • Made from 9310 steel for added strength
  • Works with stock side gears in standard carrier case
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Star Washers, 3.062" Ford 9" Drop Out New Design Only (Part No.32143)

Star Washers, 3.062" Ford 9" Drop Out New Design Only

from

$4.99
STAR washers, 3.062″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:
  • Star washer
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Motive Gear – PRO Gear Lightweight Differential Ring And Pinion – Small Pinion (Part No.F990543SP)

PRO Gear Lightweight Differential Ring And Pinion - Small Pinion

from

$441.99


Product Features:
  • R&P FORD 9″ 5.43, 9310 SMALL PIN 28 SPL. PRO
See More

USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Long (Part No.17021)

9" Ford Spartan Locker Cross Pin, Long

from

$49.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Ford 9″
  • Works with Spartan Locker or standard open spider gears
  • Long shaft
See More

Pro-King – Differential Clutch Pack (Part No.763A119)

Differential Clutch Pack

from

$119.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

FAG US – SHAFT SEAL (Part No.SS2865)

SHAFT SEAL

from

$15.99
SHAFT SEAL

Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)

Pinion Support Bolt For 8" And 9" Ford

from

$6.99
Pinion support bolt for 8″ and 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 8″ and 9″
  • 3/8″ x 24 thread
  • 1.0″ long
See More

Powertrax – No-Slip Traction System (Part No.9206902800)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Felpro – Differential Carrier Gasket (Part No.RDS 55074)

    Differential Carrier Gasket

    from

    $8.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $10.49


    Product Features:
    • SOLID SPACER FORD 8.8″ & 9″
    See More

    Powertrax – Grip LS Traction System (Part No.LS109031)

    Grip LS Traction System

    from

    $451.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    USA Standard Gear – Standard Spider Gear Set For Ford 8" & 9", 28 Spline, 2-Pinion Design (Part No.39017)

    Standard Spider Gear Set For Ford 8" & 9", 28 Spline, 2-Pinion Design

    from

    $198.99
    Product Features:
    • Spider gear kit
    • Fits Ford 8″ and 9″ 28 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    1964 Ford Galaxie Differentials

    Maybe you’re in the middle of a full rebuild of that 1964 Ford Galaxie. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 321 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1964 Ford Galaxie running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Ford Galaxie. Driveworks, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1964 Ford Galaxie, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 227 reviews in this category, some of the top rated parts include Shaft Repair Sleeve with 5.0 stars and Bearings with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1964 Ford Galaxie rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1964 Ford Galaxie Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Ford Galaxie demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Galaxie the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1964 Ford Galaxie, our most popular Felpro Differentials include:
    Differential Carrier Gasket
    from $8.49
    (9)
    Differential Carrier Gasket
    Automatic Transmission Differential Cover Gaskets

    Top 1964 Ford Galaxie Differentials from Driveworks

    Driveworks products are another trusted brand when it comes to Differentials for your 1964 Ford Galaxie. Popular Driveworks parts include:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings
    Oil Seal
    from $4.29
    (1)
    Oil Seal
    Differential Pinion Seals

    FAQs for 1964 Ford Galaxie Differentials

    What are the most purchased Differentials for the 1964 Ford Galaxie?

    Out of 321 Differentials for the 1964 Ford Galaxie, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $9.49
    This product is not rated
    Bearings
    Rear Differential Pinion Bearings
    Multi Purpose Seal
    from $15.79
    (3)
    Multi Purpose Seal
    Differential Pinion Seals

    What are the top-rated 1964 Ford Galaxie Differentials?

    Top-rated Differentials for your 1964 Ford Galaxie based on customer reviews/ratings are:
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    “As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”
    Bearings
    from $38.49
    (2)
    Bearings
    “nice finish and function. Should perform well.”
    No-Slip Traction System
    from $551.99
    (1)
    No-Slip Traction System
    “Installed, no issues, works great.”