1969 Ford F-100 Pickup Brake Parts

Essential 1969 Ford F-100 Pickup Brake Parts

Carquest Wearever – Disc Brake Caliper Guide Pin (Part No.7071)

Disc Brake Caliper Guide Pin

from

$9.49
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Contains all the necessary hardware for easy installation
  • Manufactured to restrain high tolerances with quality materials
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA80976)

Brake Hose Assembly: Copper Washers Included

from

$26.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Braking Brake Strut Spring (Part No.1338-2A)

Braking Brake Strut Spring

from

$3.79
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured to meet your expectations for a perfect fit, form and function
  • Prevents uneven braking
  • Restores brakes to like new performance
See More

Carquest Wearever – Drum Adjuster Kit (Part No.2544)

Drum Adjuster Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Contains all the necessary hardware for easy installation
  • Manufactured to restrain high tolerances with quality materials
  • Maintains safe movement and effective stopping performance
  • Helps deliver a quieter, more efficient braking system
  • Coated to eliminate heat and corrosion deterioration
See More

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Felpro – Drive Axle Shaft Flange Gasket (Part No.55021)

Drive Axle Shaft Flange Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Wearever – Drum Brake Wheel Cylinder Link (Part No.1414-2A)

Drum Brake Wheel Cylinder Link

from

$5.49
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • Increases the Life Span and Improves the Performance of the Drum Brakes
  • Eliminates heat and corrosion deterioration
  • Restores brakes to like-new performance
See More

Carquest Wearever – Drum Brake Self Adjuster Cable (Part No.H2090-2)

Drum Brake Self Adjuster Cable

from

$5.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span and maximizes performance of the Drum Brakes
  • Manufactured with quality materials to suppress high stress levels
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Drum Adjuster Cable Axle (Part No.2112-2)

Drum Adjuster Cable Axle

from

$4.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • Manufactured to restrain high tolerances with quality materials
  • Helps deliver a quieter, more efficient braking system
  • Maintains safe movement and effective stopping performance
  • This part matches Original Equipment (OE) quality specifications
See More

Yukon Gear – Trac Loc Clutch Hub For 9" Ford With 31 Splines (Part No.16158)

Trac Loc Clutch Hub For 9" Ford With 31 Splines

from

$139.99
Trac Loc clutch hub for 9″ Ford with 31 splines.

Product Features:
  • Clutch hub
  • Fits Ford 9″ Trac Loc with 31 spline axles
See More

Carquest Wearever – Brake Shoes (Part No.S169)

Brake Shoes

from

$33.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Drum Brake Adjusting Lever (Part No.2035-2)

Drum Brake Adjusting Lever

from

$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals to prevent comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured to meet your expectations for a perfect fit, form and function
  • Minimizes drag to improve gas mileage
  • Eliminates heat and corrosion deterioration
  • Restores brakes to like-new performance
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1107-2)

Brake Spring Hold-Down Pin

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

Wagner – Return Spring Kit (Part No.H111)

Return Spring Kit

from

$10.49
Wagner Brake Products provide the latest innovations in braking technologies and complete coverage for passenger vehicles and medium-duty commercial applications. Wagner Brake Products continue to set industry standards with engineering expertise and a commitment to ensuring that Wagner parts deliver original equipment fit, form and function to deliver superior braking performance. With comprehensive coverage, Wagner Brake offers all the components necessary for a complete brake repair. Wagner premium products offer exceptional quality for all the latest applications.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1386)

Remanufactured Brake Master Cylinder

from

$41.49
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-37781)

Remanufactured Brake Master Cylinder

from

$29.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74201)

Vacuum Brake Booster: Without Master Cylinder

from

$116.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-73009)

Vacuum Brake Booster: Without Master Cylinder

from

$95.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – Parking Brake Washers (Part No.1177-2)

Parking Brake Washers

from

$4.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Prevents noise and premature wear
  • Manufactured with quality materials to suppress high stress levels
  • Restores brakes to like-new performance
See More

Carquest Standard – BRAKE PAD SET-SILVER (Part No.MKD91)

BRAKE PAD SET-SILVER

from

$31.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
See More

Carquest Wearever – Brake Shoes (Part No.S282)

Brake Shoes

from

$49.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA41718)

WHEEL CYLINDER

from

$18.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA59240)

WHEEL CYLINDER

from

$13.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA18291)

Drum Brake Wheel Cylinder

from

$20.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly (Part No.1522)

Drum Brake Adjusting Screw Assembly

from

$5.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Direct replacement for a proper fit
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1521)

Drum Brake Adjusting Screw Assembly with Tip

from

$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Drum Adjusting screws with tip (Part No.H1500)

Drum Adjusting screws with tip

from

$6.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

1969 Ford F-100 Pickup Brake Parts

You count on your 1969 Ford F-100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 41 Brake Parts ranging in price from $2.49 to $139.99, you’re sure to find everything you need for your 1969 Ford F-100 Pickup.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 6 different brands like Carquest, Cardone, and Wearever. 1969 Ford F-100 Pickup Brake Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,854 extensive product reviews on 1969 Ford F-100 Pickup Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Shoes with 4.5 stars and Brake Hold-Down Spring Cup with 5.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1969 Ford F-100 Pickup below to get started!

Top-Rated Brake Parts Brands For Your 1969 Ford F-100 Pickup

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 Ford F-100 Pickup running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Wearever, and even more.

Popular Wearever Brake Parts

You’ll find popular Wearever brand products across Brake Boosters. All are waiting to get your 1969 Ford F-100 Pickup back on the road. Some of the top-rated Wearever products in these categories are:
Vacuum Brake Booster: Without Master Cylinder
from $86.99
(1)
Vacuum Brake Booster: Without Master Cylinder
Power Brake Boosters

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1969 Ford F-100 Pickup, and some of our most reviewed Carquest Wearever parts include:
Disc Brake Caliper Guide Pin
from $9.49
(49)
Disc Brake Caliper Guide Pin
Brake Hardware Kits
Drum Adjuster Kit
from $15.29
(28)
Drum Adjuster Kit
Brake Self Adjuster Kits
Drum Adjuster Kit
from $15.29
(22)
Drum Adjuster Kit
Brake Self Adjuster Kits

FAQs for 1969 Ford F-100 Pickup Brake Parts

What are the most purchased Brake Parts for the 1969 Ford F-100 Pickup?

Out of 41 Brake Parts for the 1969 Ford F-100 Pickup, the most popular in our inventory are:
Wheel Cylinder
from $13.99
(20)
Wheel Cylinder
Brake Wheel Cylinders
Wheel Cylinder
from $13.99
(22)
Wheel Cylinder
Brake Wheel Cylinders
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

What are the top-rated 1969 Ford F-100 Pickup Brake Parts?

Top-rated Brake Parts for your 1969 Ford F-100 Pickup based on customer reviews/ratings are:
Brake Shoes
from $35.99
(22)
Brake Shoes
“Handy being able to order the parts online and then pick them up at the store later.”
Brake Hold-Down Spring Cup
from $3.79
(5)
Brake Hold-Down Spring Cup
“worked great”
Drum Brake Wheel Cylinder
from $18.99
(4)
Drum Brake Wheel Cylinder
“Fit fine, works okay.”