1968 Ford LTD Clutch Systems
More 1968 Ford LTD Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1968 Ford LTD, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1968 Ford LTD Clutch Systems
ATP – Automatic Transmission Flex Plate (Part No.Z-127)
from
$70.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Flywheels (Part No.12-060)
from
$169.99
Flywheels
ATP – Automatic Transmission Flex Plate (Part No.Z-157)
from
$79.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Dorman – Clutch Pilot Bearing .596 In. x .829 In. Type E, Length .586 In. (sold by each) (Part No.690-044)
from
$3.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.FC-65354)
from
$8.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Pilot Bearing, Needle Bearing (Part No.S-FC65662)
LuK – Clutch Kit: 10 15/16" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-027)
from
$171.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Dorman – Clutch Pilot Bushing (sold by each) (Part No.690-028)
from
$4.99
Our Clutch Pilot Bushing extends the life of the transmission and helps ensures smooth, reliable shift quality. Replacement recommended during clutch replacement
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- High quality metal construction
- Ensures transmission longevity
- Replacement reduces driveline noise and vibration
Dorman – Clutch Pilot Bushing .673 In. x 1.379 In. Type A, Length .565 In. (sold by each) (Part No.690-039)
from
$6.49
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-502)
from
$37.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – M/T FLYL RNG GR (Part No.ZA-579)
from
$98.99
M/T FLYL RNG GR
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-542)
from
$50.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – M/T FLYL RNG GR (Part No.ZA-559)
from
$28.99
M/T FLYL RNG GR
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-501)
from
$26.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – AT CLUTCH PLATE (Part No.FC-4)
from
$13.99
AT CLUTCH PLATE
Popular 1968 Ford LTD Clutch Systems Categories
1968 Ford LTD Clutch Systems
You count on your 1968 Ford LTD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 28 Clutch Systems ranging in price from $6.49 to $1,210.00, you’re sure to find everything you need for your 1968 Ford LTD.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 6 different brands like National, ATP, and LuK. 1968 Ford LTD Clutch Systems start as low as $6.49!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 81 extensive product reviews on 1968 Ford LTD Clutch Systems.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1968 Ford LTD below to get started!
Top-Rated Clutch Systems Brands For Your 1968 Ford LTD
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Ford LTD running right for years to come. In our inventory you’ll find brands like National, ATP, LuK, and even more.
Popular ATP Clutch Systems
You’ll find popular ATP brand products across Flywheels. All are waiting to get your 1968 Ford LTD back on the road. Some of the top-rated ATP products in these categories are:
Top-Rated Clutch Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Clutch Systems for your 1968 Ford LTD, and some of our most reviewed parts include:
FAQs for 1968 Ford LTD Clutch Systems
What are the most purchased Clutch Systems for the 1968 Ford LTD?
Out of 28 Clutch Systems for the 1968 Ford LTD, the most popular in our inventory are:
from
$171.99
This product is not rated
Clutch Kit: 10 15/16" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline
Clutch Sets
