1968 Chevrolet K10 Drivetrains
More 1968 Chevrolet K10 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1968 Chevrolet K10, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1968 Chevrolet K10 Drivetrains
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)
from
$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 2.030″ I.D.
- 8 bent over tabs
National – Shaft Repair Sleeve (Part No.99170)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM (Part No.32238)
from
$61.99
Chrome Moly cross pin shaft for Mini-Spool for 8.5″ GM HD.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.5″
- Chromoly steel for added strength
USA Standard Gear – Spartan Locker for Dana 44 Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17001)
from
$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Yukon Gear – 4340 Chrome-Moly Left Hand Inner Axle For Dana 44, ’67-’71 Ford Bronco, ’69-’80 GM, 5-760 (Part No.21353)
from
$298.99
Yukon 4340 Chrome-Moly left hand inner replacement axle for Dana 44, ’67-’71 Ford Bronco, ’69-’80 GM with a length of 18.5″ and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.
Product Features:
See More
Product Features:
- Fits 1971-1977 Bronco and 1969-1980 Gm half ton front
- 4340 Chromoly
- Left hand inner axle
- 18 3/8″ from end of splines to center of u-joint bore
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)
National – Bearings (Part No.N-1211-L)
from
$94.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)
from
$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for GM 8.5″ and 8.6″
- Fits standard open differentials only
- 0.795″ I.D.
Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
MOOG Driveline Products – Double Cardan CV H Yoke (Part No.647)
from
$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Pro-King – Differential Pinion Seal (Part No.742G070)
from
$4.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Richmond Gear – Differential Cross Shaft (Part No.CSPGM12)
from
$27.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
National – Bearings (Part No.B-2610)
from
$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)
from
$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle Redi-sleeve
- Fits Dana Spicer 44
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts (Part No.32282)
from
$251.99
Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 1310 u-joint size
- Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
USA Standard Gear – Ring & Pinion Gear Set For GM 8.5" In A 3.42 Ratio (Part No.36213)
from
$287.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- 8.50″ ring gear diameter
- 30 spline pinion
- 10 ring gear bolts
- 3.42 ratio
Yukon Gear – Star Washer For GM 12 Bolt Posi Cross Pin Bolt (Part No.33348)
from
$5.99
Star washer for GM 12 bolt posi cross pin bolt.
Product Features:
See More
Product Features:
- Star washer
- Fits GM 12 bolt passenger car
Popular 1968 Chevrolet K10 Drivetrains Categories
1968 Chevrolet K10 Drivetrains
You count on your 1968 Chevrolet K10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 528 Drivetrains ranging in price from $3.99 to $1,674.99, you’re sure to find everything you need for your 1968 Chevrolet K10.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and National. 1968 Chevrolet K10 Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,200 extensive product reviews on 1968 Chevrolet K10 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1968 Chevrolet K10 below to get started!
Top-Rated Drivetrains Brands For Your 1968 Chevrolet K10
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Chevrolet K10 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1968 Chevrolet K10 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1968 Chevrolet K10 Drivetrains
What are the most purchased Drivetrains for the 1968 Chevrolet K10?
Out of 528 Drivetrains for the 1968 Chevrolet K10, the most popular in our inventory are:
What are the top-rated 1968 Chevrolet K10 Drivetrains?
Top-rated Drivetrains for your 1968 Chevrolet K10 based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$14.99
(20)
Multi Purpose Seal
“THIS WAS a project to install because of where it is located in the shift housing. go on this site:[@] click on axle tech. this was a big help. but s”
