1968 Chevrolet C30 Pickup Performance and Racing Products

Essential 1968 Chevrolet C30 Pickup Performance and Racing Products

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

MSD Ignition – Distributor; Tall Block Chevy V8; Low Profile (Part No.8558)

Distributor; Tall Block Chevy V8; Low Profile

from

$471.99
The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark plugs. The high voltage carrying capabilities are the result of several features which have been designed into these low-profile distributors. This includes a large diameter cap with wide spaced terminals and an injection molded Rynite rotor with thick vanes to stir up the air inside the cap. The high dielectric Rynite base also prevents arcing to the billet housing. Since these distributors are used primarily in racing applications, an oversized steel shaft is responsible for delivering the sparks. This shaft is QPQ coated for friction reduction and receives guidance from a sealed ball-bearing assembly and an extra long, precision sintered bushing for smooth operation. Note: must be used with an MSD crank trigger and ignition control.

Product Features:
  • Designed to fit low in the block to clear firewall/intake combos
  • Supplied w/Bronze Gear
  • Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
  • Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Oversized Polished Steel Shaft w/QPQ Coating
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9730)

Performer Series Retainer (Qty 16)

from

$99.99
Product Features:
  • Use W/ Valve Springs Part #5703, 5794
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

MSD Ignition – Distributor Cap; Alkyd; MSD Chevy V8 Distributor (Part No.8437)

Distributor Cap; Alkyd; MSD Chevy V8 Distributor

from

$48.49
All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.

Product Features:
  • Update The GM Points Cap w/MSD Performance
  • High Quality; Voltage Insulating Material
  • Low Resistance
  • Performance replacement part
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4107G)

Body Cab Mount Set

from

$103.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Mr. Gasket – Intake Gasket Set – Standard Duty – Big Block Chevy With Stock Rectangle Ports – 1.75"W X 2.50"H (Part No.108)

Intake Gasket Set - Standard Duty - Big Block Chevy With Stock Rectangle Ports - 1.75"W X 2.50"H

from

$29.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals & distributor gaskets if applicable
  • For OE replacement, high performance street, drag race and oval track use
See More

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$85.09
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8

from

$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Accel – Custom Fit Spark Plug Wire Set (Part No.8842)

Custom Fit Spark Plug Wire Set

from

$115.99
Custom Fit Spark Plug Wire Set

Mr. Gasket – Alternator (Part No.5122)

Alternator

from

$288.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability. This 10SI style 80 amp alternator can be used as an original equipment replacement OR as a 1-wire alternator.

Product Features:
  • Fits Most 1973-1983 GM Vehicles
  • Bolt Spacing 6.6″
  • 80 Amps
  • GM 10SI Style Alternator
  • Chrome Plated Finish
  • 1-Groove V-belt pulley – included
  • Internal Regulator
See More

Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)

Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet

from

$1009.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 64cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Energy Suspension – Track Arm Bushing Set (Part No.3.7116G)

Track Arm Bushing Set

from

$19.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Spectre – Water Neck; Chevy 90 Degree (Part No.4933)

Water Neck; Chevy 90 Degree

from

$50.99
Spectre’s Chevrolet water neck fits Chevy V8 engines and features a 90 degree neck with a 360 degree swivel design for a custom look and fit. This water neck has been designed around the OEM specifications, has a height of 2-7/8 inches and has a polished aluminum finish for a lasting look that fits great. This water neck includes the allen bolts and sealing O-ring.

Product Features:
  • Fits Chevy V8 engines
  • 90 degree neck with a 360 degree swivel design
  • 2-7/8 inch height
  • Includes sealing O-ring and allen bolts
  • Polished aluminum finish
  • Easy to install
See More

Edelbrock – Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9913)

Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$427.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Annular Booster Type
  • Electric Choke Type
  • 750 cfm Maximum Flow Rating
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13120R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6086)

Oil Pan Bolt Kit

from

$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Competition Cams – CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT (Part No.CL12-206-2)

CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT

from

$323.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Mr. Gasket – Intake Bolt Kit (Part No.5004)

Intake Bolt Kit

from

$61.99
Finish your custom engine job with these show quality grade 5 chromed bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1-1/4 inch bolts and (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
  • Ideal For Street Rods/Machines
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.90)

Timing Cover Gasket Set

from

$21.99
Mr. Gasket Performance Timing Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Solid Motor Mount (Part No.3671)

Solid Motor Mount

from

$59.19
Mr. Gasket Solid Steel Motor Mounts are recommended only for competition applications. This .180 inch thick, zinc dichromate plated solid mounts do not have the flexing present in rubber or even polyurethane engine mounts. This prevents lateral engine movement or twisting in high horsepower and torque applications. Nor will steel mounts break as easily as stock rubber mounts can. Engine movement in applications like this can cause contact of engine components into places they do not need to be (like headers hitting the frame of the car). Also engine twisting can cause severe drivetrain misalignment affecting shifting or even power transmission to the ground. However, without the insulative effect of rubber, vibration can be substantial and thus solid mounts are not recommended for the street.

Product Features:
  • .180 inch thick solid steel minimizes engine movement
  • Solid steel less prone to breakage than stock rubber mounts
  • Prevent driveline misalignment that can affect accurate shifting and power transmission
  • Prevents engine accessories from coming in contact with frame due to movement
  • Recommended for competition use
  • Sold as a LH/RH pair
See More

Spectre – Chevrolet Small Block V8 Harmonic Balancer Bolt Kit (Part No.4699)

Chevrolet Small Block V8 Harmonic Balancer Bolt Kit

from

$7.99
Spectre’s Harmonic Balancer Bolt Kit is designed to fit Chevrolet Small Block 265-400 V8 engines. This grade 8 bolt is 2-1/2 inches long, and features a plated finish for corrosion resistance. This kit also includes a security lock washer.

Product Features:
  • Fits Chevrolet Small Block 265-400 V8 engines
  • Features a corrosion resistant plated finish
  • Gold iridite finish
  • Grade 8 bolt, 7/16 inch-20 by 2-1/2 inches
  • Includes security lock washer
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6081)

Super Intake Manifold Bolts

from

$38.99
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Mr. Gasket – Timing Tab (Part No.4598)

Timing Tab

from

$15.99
Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing.

Product Features:
  • Bolts on using existing timing cover bolts
  • Chrome finish compliments chrome timing covers
  • Red adjustable pointer makes it easier to check timing
See More

Popular 1968 Chevrolet C30 Pickup Performance and Racing Products Categories

1968 Chevrolet C30 Pickup Performance and Racing Products

You count on your 1968 Chevrolet C30 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 264 Performance and Racing Products ranging in price from $5.99 to $1,009.99, you’re sure to find everything you need for your 1968 Chevrolet C30 Pickup.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 20 different brands like Mr. Gasket, Edelbrock, and K&N. 1968 Chevrolet C30 Pickup Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 994 extensive product reviews on 1968 Chevrolet C30 Pickup Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Ultra-Seal Intake Manifold Gasket with Silicone Beading with 4.3 stars and Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration with 4.9 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1968 Chevrolet C30 Pickup below to get started!

Top-Rated Performance and Racing Products Brands For Your 1968 Chevrolet C30 Pickup

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Chevrolet C30 Pickup running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Edelbrock, K&N, and even more.

Popular Energy Suspension Performance and Racing Products

You’ll find popular Energy Suspension brand products across Performance Steering Products. All are waiting to get your 1968 Chevrolet C30 Pickup back on the road. Some of the top-rated Energy Suspension products in these categories are:
Tie Rod Dust Boot
from $8.99
(1)
Tie Rod Dust Boot
Performance Tie Rod End Boots

Top-Rated Edelbrock Performance and Racing Products


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1968 Chevrolet C30 Pickup, and some of our most reviewed Edelbrock parts include:
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
from $195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
Performance Intake Manifolds

FAQs for 1968 Chevrolet C30 Pickup Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1968 Chevrolet C30 Pickup?

Out of 264 Performance and Racing Products for the 1968 Chevrolet C30 Pickup, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

What are the top-rated 1968 Chevrolet C30 Pickup Performance and Racing Products?

Top-rated Performance and Racing Products for your 1968 Chevrolet C30 Pickup based on customer reviews/ratings are:
Ultra-Seal Intake Manifold Gasket with Silicone Beading
from $31.99
(18)
Ultra-Seal Intake Manifold Gasket with Silicone Beading
“Can’t go wrong with Mr Gasket”
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
from $89.99
(14)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“I just installed a new crate 350 in my 1956 Bel Air. I’ve used K&N’s before and I’m looking forward to improved performance and long use with this fi”
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
from $20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
“Put new headers on motor”