1968 BMW 1800 Cooling and Climate Controls
More 1968 BMW 1800 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1968 BMW 1800, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1968 BMW 1800 Cooling and Climate Controls
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – Integrated Thermostat Housing: 180 Degrees (Part No.13578)
from
$34.99
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
National – Bearings (Part No.206-FF)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Mr. Gasket – Thermocap Radiator Cap (Part No.2471B)
from
$46.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$47.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$47.19
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Carquest Premium – Radiator Cap: 13 PSI (Part No.10329)
from
$10.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Popular 1968 BMW 1800 Cooling and Climate Controls Categories
1968 BMW 1800 Cooling and Climate Controls
You count on your 1968 BMW 1800 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 13 Cooling and Climate Controls ranging in price from $16.99 to $99.99, you’re sure to find everything you need for your 1968 BMW 1800.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 5 different brands like Imperial, Factory Air, and Mr. Gasket. 1968 BMW 1800 Cooling and Climate Controls start as low as $16.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 132 extensive product reviews on 1968 BMW 1800 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Thermocap Radiator Cap with 3.2 stars and Bearings with 2.3 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1968 BMW 1800 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1968 BMW 1800
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 BMW 1800 running right for years to come. In our inventory you’ll find brands like Imperial, Factory Air, Mr. Gasket, and even more.
Popular Factory Air Cooling and Climate Controls
You’ll find popular Factory Air brand products across Air Conditioning Parts. All are waiting to get your 1968 BMW 1800 back on the road. Some of the top-rated Factory Air products in these categories are:
Top-Rated Imperial Cooling and Climate Controls
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Cooling and Climate Controls for your 1968 BMW 1800, and some of our most reviewed Imperial parts include:
FAQs for 1968 BMW 1800 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1968 BMW 1800?
Out of 13 Cooling and Climate Controls for the 1968 BMW 1800, the most popular in our inventory are:
What are the top-rated 1968 BMW 1800 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1968 BMW 1800 based on customer reviews/ratings are:
from
$47.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”
from
$17.99
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
from
$62.99
(2)
Thermostatic Fan Control – Adjustable
“Need to find brass bushings to fit sensor to intake.Very easy to install!”
