1967 Oldsmobile Cutlass Supreme Drivetrains

Essential Drivetrains for 1967 Oldsmobile Cutlass Supremes

USA Standard Gear – Bearing Kit For ’81-’99 GM 7.5" & 7.625" Rear (Part No.58015)

Bearing Kit For '81-'99 GM 7.5" & 7.625" Rear

from

$159.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Powertrax – No-Slip Traction System (Part No.9207822801)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Neapco – Universal Joint (Part No.1-0025)

    Universal Joint

    from

    $2.59
    Universal Joint Strap Kit
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

    1310 Lifetime U/Joint

    from

    $57.99
    1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
    See More

    Driveworks – Oil Seal Kit (Part No.S-5200)

    Oil Seal Kit

    from

    $6.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – 8.5" GM Extra HD Standard Open Case (Uses Larger Bearings) (Part No.20084)

    8.5" GM Extra HD Standard Open Case (Uses Larger Bearings)

    from

    $232.99
    8.5″ GM EXTRA HD standard Open case (uses larger bearings).

    Product Features:
    • Standard open carrier case
    • Fits GM 8.5″ with 28 or 30 spline axles
    • 2.73 and up ratio only
    • Does not include spider gears
    • Has larger carrier carrier bearing journals for high strength
    See More

    National – Shaft Repair Sleeve (Part No.99125)

    Shaft Repair Sleeve

    from

    $24.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Multi Purpose Seal (Part No.2146)

    Multi Purpose Seal

    from

    $18.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

    High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

    from

    $12.99
    High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

    Product Features:
    • Better Wear Protection
    • Increased Protection against Low Speed Pre-Ignition
    • Increased Fuel Efficiency
    • Better Protection for Vehicle Exhaust Emissions Equipment
    • Improved Compatibility with Fuels Containing Ethanol
    • Superior Corrosion Protection
    • Made in USA
    See More

    Felpro – Drive Axle Shaft Flange Gasket (Part No.55010)

    Drive Axle Shaft Flange Gasket

    from

    $3.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Multi Purpose Seal (Part No.8460N)

    Multi Purpose Seal

    from

    $13.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.5200)

    Multi Purpose Seal

    from

    $12.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Dorman – Rear Differential Cover (Part No.697-701)

    Rear Differential Cover

    from

    $20.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    FAG US – SHAFT SEAL (Part No.SS2569)

    SHAFT SEAL

    from

    $5.19
    SHAFT SEAL

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    FAG US – CUP (Part No.LM67010)

    CUP

    from

    $6.69
    CUP

    Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)

    Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal

    from

    $25.99
    Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

    Product Features:
    • 27 spline
    • 8.31″ long
    • Fits Dana Spicer 30 in 1987-1994 Wrangler
    • Outer stub
    • 5-760X U-joint size
    • 4340 Chromoly
    • For WARN hub conversion only
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    National – Bearings (Part No.M804010)

    Bearings

    from

    $25.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    USA Standard Gear – Ring & Pinion Gear Set For GM 7.5" In A 3.42 Ratio (Part No.36195)

    Ring & Pinion Gear Set For GM 7.5" In A 3.42 Ratio

    from

    $344.99
    USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

    Product Features:
    • Fits GM 7.5″ and 7.6″
    • 7.50″ ring gear diameter
    • 27 spline pinion
    • 10 ring gear bolts
    • 3.42 ratio
    See More

    USA Standard Gear – Ring & Pinion "Thick" Gear Set For GM 7.5" In A 3.42 Ratio (Part No.36196)

    Ring & Pinion "Thick" Gear Set For GM 7.5" In A 3.42 Ratio

    from

    $319.99
    USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

    Product Features:
    • Fits GM 7.5″ and 7.6″
    • 7.50″ ring gear diameter
    • 27 spline pinion
    • 10 ring gear bolts
    • 3.42 ratio
    • Thick gear for 3.23 and down carrier
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1019-B)

    RngPnnInstlKt

    from

    $39.49
    RngPnnInstlKt

    Motive Gear – Differential Gear Install Kit (Part No.GM12IKC)

    Differential Gear Install Kit

    from

    $64.49


    Product Features:
    • MINI INSTALL KIT GM 12BLT 8.875 CAR
    See More

    Yukon Gear – Ring Gear Bolt (Part No.33049)

    Ring Gear Bolt

    from

    $6.99
    Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
    • 7/16″ x 20
    See More

    ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

    For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

    from

    $37.99
    The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

    Product Features:
    • Forged From Premium Grade 8740 Chrome Moly Steel
    • Heat Treated
    • Nominally Rated At 200,000 Psi Tensile Strength
    • Specially Hardened, Precision Ground Washers
    • 3/8″-24 RH Thread Size
    • 0.8″ Underhead Length
    • 200,000 PSI
    See More

    Upgrade your 1967 Oldsmobile Cutlass Supreme with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1967 Oldsmobile Cutlass Supreme, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Drivetrains are key to keeping your Cutlass Supreme functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Drivetrains for the 1967 Oldsmobile Cutlass Supreme, designed to meet your needs without breaking the bank. From Differential replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1967 Oldsmobile Cutlass Supreme at great prices. Our Drivetrains inventory for this model ranges from just $3.29 to $1,566.99, with an average price of $136.48. Our 52 Drivetrains in stock come from 12 trusted brands, so you’re sure to find the right part for your 1967 Oldsmobile Cutlass Supreme without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 Oldsmobile Cutlass Supreme, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Moog, National, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Moog and National also bring quality to the table, with Drivetrains available starting at $7.99, and at an average 4 stars rating. With 318 customer reviews and counting, our 1967 Oldsmobile Cutlass Supreme Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1967 Oldsmobile Cutlass Supreme is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Supreme in top shape, all in one place. Start shopping confidently below for your 1967 Oldsmobile Cutlass Supreme!

    Best-Selling Differentials for 1967 Oldsmobile Cutlass Supremes

    Enhance the driving experience in your Oldsmobile with 32 quality Differential components, starting at $3.99.

    Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    from

    $14.49
    Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

    Product Features:
    • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Driveworks – Oil Seal (Part No.S-2043)

    Oil Seal

    from

    $7.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 13410)

    Differential Cover Gasket

    from

    $11.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Motive Gear – Pinion Seal (Part No.8610)

    Pinion Seal

    from

    $3.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    National – Bearings (Part No.M804049)

    Bearings

    from

    $38.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1104)

    Differential Pinion Shim Kit

    from

    $12.99


    Product Features:
    • KIT SHIM
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885488)

    Performance Differential Ring and Pinion

    from

    $232.99


    Product Features:
    • GM 10BL 8.5 R/P 4.88 FRT/REAR MGP
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Powertrax – Lock Right Locker (Part No.1940-LR)

    Lock Right Locker

    from

    $441.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.BP882411)

    Performance Differential Ring and Pinion

    from

    $322.99


    Product Features:
    • BOP R/P 8.2″ 10BLT 4.11
    See More

    ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

    For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

    from

    $37.99
    The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

    Product Features:
    • Forged From Premium Grade 8740 Chrome Moly Steel
    • Heat Treated
    • Nominally Rated At 200,000 Psi Tensile Strength
    • Specially Hardened, Precision Ground Washers
    • 3/8″-24 RH Thread Size
    • 0.8″ Underhead Length
    • 200,000 PSI
    See More

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.5PR)

    Differential Bearing Kit - Koyo

    from

    $94.49
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • BRG & SEAL KIT-10 BOLT “P” AXLE
    See More

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    Powertrax – No-Slip Traction System (Part No.9207822801)

    No-Slip Traction System

    from

    $544.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
    See More

    Richmond Gear – RngPnn (Part No.49-0082-1)

    RngPnn

    from

    $491.99
    RngPnn

    Powertrax – Grip LS Traction System (Part No.LS201028)

    Grip LS Traction System

    from

    $463.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)

    Performance Differential Ring and Pinion

    from

    $343.99


    Product Features:
    • GM 10BL 8.5 R/P 4.56 FRT/REAR MGP
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.BP882373)

    Performance Differential Ring and Pinion

    from

    $319.99


    Product Features:
    • BOP R/P 8.2″ 10BLT 3.73
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885513)

    Performance Differential Ring and Pinion

    from

    $231.99


    Product Features:
    • GM 10BL 8.5 R/P 5.13 FRT/REAR MGP
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885410)

    Performance Differential Ring and Pinion

    from

    $222.99


    Product Features:
    • GM 10BL 8.5 R/P 4.10 FRT/REAR MGP
    See More

    Spectre – Differential Cover (Part No.60879)

    Differential Cover

    from

    $189.99
    Spectre’s Polished Aluminum Differential Covers feature a finned design and 10 bolt assembly for optimum fit and function. Includes 10 SAE standard bolts for installation. You’ll need to supply your own bolts if your vehicle uses metric bolts. Manufactured using high quality materials this product was designed to perform as well as they look.

    Product Features:
    • Polished aluminum
    • 10 bolt cover with finned design
    • Gasket included
    • 10 gold Iridite 3/8 inch -18 x 3/4 inch differential cover bolts included
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1040-1)

    RngPnnInstlKt

    from

    $182.99
    RngPnnInstlKt

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.5PRMKT)

    Differential Master Bearing Kit - Timken

    from

    $111.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • MASTER KIT GM 10 BOLT ‘P’ AXLE
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.5PRMK)

    Differential Master Bearing Kit - Koyo

    from

    $109.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • BRNG & SEAL MASTER KIT-10 BOLT “P”
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.R8.5PRT)

    Differential Bearing Kit - Timken

    from

    $94.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG & SEAL GM 8.5″ ‘P’ AXLE
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM8.5PIK)

    Differential Gear Install Kit

    from

    $59.99


    Product Features:
    • 8.5 “P” AXLE MINI INSTALL KIT
    See More

    FAG US – SHAFT SEAL (Part No.SS2983)

    SHAFT SEAL

    from

    $14.29
    SHAFT SEAL

    Most Popular 1967 Oldsmobile Cutlass Supreme Drive Shafts and Axles

    Customize your Oldsmobile with 2 Drive Shafts and Axles products like Axle Shaft Seals and Axle Flange Gaskets, all priced under $42.99.

    Felpro – Drive Axle Shaft Flange Gasket (Part No.55010)

    Drive Axle Shaft Flange Gasket

    from

    $3.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Outer Axle Seal For Set9, Fits.490" Wide 8.2" Buick, Oldsmobile, And Pontiac (Part No.30169)

    Outer Axle Seal For Set9, Fits.490" Wide 8.2" Buick, Oldsmobile, And Pontiac

    from

    $42.99
    Outer axle seal for set9, fits.490″ wide 8.2″ Buick, Oldsmobile, and Pontiac applications only.Yukon Mighty seal.

    Product Features:
    • Outer axle seal
    • Fits 8.2″ Buick, Oldsmobile and Pontiac
    • 0.490″ wide
    See More

    Top Picks for 1967 Oldsmobile Cutlass Supreme Transfer Cases

    Upgrade Oldsmobile Cutlass Supremes with top-quality Transfer Cases parts, including 11 OEM and aftermarket selections for your 1967 model.

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.9449)

    Multi Purpose Seal

    from

    $9.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.5200)

    Multi Purpose Seal

    from

    $12.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Shaft Repair Sleeve (Part No.99199)

    Shaft Repair Sleeve

    from

    $37.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    National – Multi Purpose Seal (Part No.9613S)

    Multi Purpose Seal

    from

    $7.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.7412S)

    Multi Purpose Seal

    from

    $14.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Oil Seal Kit (Part No.S-5200)

    Oil Seal Kit

    from

    $6.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Bearings (Part No.M804010)

    Bearings

    from

    $25.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Shaft Repair Sleeve (Part No.99125)

    Shaft Repair Sleeve

    from

    $24.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    FAG US – SHAFT SEAL (Part No.SS2960)

    SHAFT SEAL

    from

    $9.59
    SHAFT SEAL

    In-Demand Universal Joints for 1967 Oldsmobile Cutlass Supremes

    Select from 7 premium Universal Joints parts for your 1967 Oldsmobile Cutlass Supreme, with prices ranging from $11.99 to $41.99.

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

    Greaseable Premium Universal Joint

    from

    $26.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

    Universal Joint Strap Kit

    from

    $11.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 355, 372 & 534G
    • Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

    Greaseable Super Strength Universal Joint

    from

    $36.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

    Greaseable Super Strength Universal Joint

    from

    $34.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

    Non-Greaseable Super Strength Universal Joint

    from

    $41.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    Top-Rated Drivetrains Brands For Your 1967 Oldsmobile Cutlass Supreme

    Shop for the best-rated brands offering Drivetrains and other products for your 1967 Oldsmobile Cutlass Supremes. Below you’ll find some of our best rated Drivetrains from Valvoline, Moog, and National, and more. Drivetrains from these brands that fit a 1967 Cutlass Supreme start at just $7.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Valvoline 1967 Oldsmobile Cutlass Supreme Drivetrains

    When it comes to maintaining or upgrading your 1967 Oldsmobile Cutlass Supreme, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1967 Oldsmobile Cutlass Supreme. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
    from
    $14.49

    (2)

    DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    “I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
    I pu”

    Popular Moog 1967 Oldsmobile Cutlass Supreme Drivetrains

    Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1967 Oldsmobile Cutlass Supreme owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1967 Cutlass Supreme, Advance Auto Parts carries a full inventory of 7 Moog Drivetrains. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Moog Drivetrains range from $11.99 to $41.99, plus, with more than 278 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Greaseable Premium Universal Joint
    from
    $26.99

    (89)

    Greaseable Premium Universal Joint

    “Great moog u joints”

    Non-Greaseable Super Strength Universal Joint
    from
    $32.99

    (22)

    Non-Greaseable Super Strength Universal Joint

    “Moog products are always great quality. Perfect fit”

    Universal Joint Strap Kit
    from
    $11.99

    (35)

    Universal Joint Strap Kit

    “Fit on my 99 gmc sierra 1500 z71 perfect”

    FAQs for 1967 Oldsmobile Cutlass Supreme Drivetrains

    Which Drivetrains are best-sellers for 1967 Oldsmobile Cutlass Supremes?

    Out of 52 Drivetrains that fit 1967 Oldsmobile Cutlass Supremes, the following parts are the top sellers:

    What’s the price range for 1967 Oldsmobile Cutlass Supreme Drivetrains?

    Drivetrain prices for the 1967 Oldsmobile Cutlass Supreme start at $3.29 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1967 Oldsmobile Cutlass Supreme?

    The average price for Drivetrains for the 1967 Oldsmobile Cutlass Supreme is $136.48. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Oldsmobile Cutlass Supreme model years?

    Yes, we currently carry Drivetrains for 30 model years of Oldsmobile Cutlass Supremes between 1968 and 1997. Drivetrains are bought most frequently for the following model years: 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, and 1989.

    What are the cheapest Drivetrains for my 1967 Oldsmobile Cutlass Supreme?

    The cheapest 1967 Oldsmobile Cutlass Supreme Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1967 Oldsmobile Cutlass Supreme?

    Out of 318 reviews by customers, our 1967 Oldsmobile Cutlass Supreme Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1967 Oldsmobile Cutlass Supreme and their top-rated products:

    What types of Drivetrains do you sell for my 1967 Oldsmobile Cutlass Supreme?

    Can I get help with 1967 Oldsmobile Cutlass Supreme Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Drivetrains and more.

    What is your return policy for Oldsmobile Cutlass Supreme Drivetrains?

    Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Supreme Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.