1967 Oldsmobile Cutlass Supreme Differentials

Essential 1967 Oldsmobile Cutlass Supreme Differentials

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Aluminum Girdle Cover For GM 7.5" & 7.625" (Part No.32118)

Aluminum Girdle Cover For GM 7.5" & 7.625"

from

$379.99
Product Features:
  • Fits GM 7.5″ and 7.625″
  • Aluminum girdle cover
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

FAG US – SHAFT SEAL (Part No.SS2588)

SHAFT SEAL

from

$27.49
SHAFT SEAL

Driveworks – Oil Seal (Part No.S-8460N)

Oil Seal

from

$6.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.5OR)

Differential Bearing Kit - Koyo

from

$73.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • BRG & SEAL KIT 10 BOLT “O” AXLE 1968-70
See More

USA Standard Gear – Bearing Kit For GM 8.5" Rear (Part No.58011)

Bearing Kit For GM 8.5" Rear

from

$136.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 8.5″ rear
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

National – Shaft Repair Sleeve (Part No.99193)

Shaft Repair Sleeve

from

$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99152)

Shaft Repair Sleeve

from

$38.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up (Part No.20106)

Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up

from

$399.99
GM 7.5″ & 7.6″ DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 7.5″ and 7.625″
  • 3.23 and up ratios only
See More

Powertrax – Grip LS Traction System (Part No.LS201028)

Grip LS Traction System

from

$463.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Ring Gear Bolt (Part No.33049)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:
  • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
  • 7/16″ x 20
See More

Motive Gear – Ring Gear Bolt (Part No.14066913)

Ring Gear Bolt

from

$2.49


Product Features:
  • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
See More

Yukon Gear – Set Up Bearing (Part No.56043)

Set Up Bearing

from

$119.99
HM89249 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits HM89249 pinion bearing
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
See More

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

USA Standard Gear – Ring & Pinion Gear Set For GM 7.5" In A 3.42 Ratio (Part No.36195)

Ring & Pinion Gear Set For GM 7.5" In A 3.42 Ratio

from

$344.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 7.5″ and 7.6″
  • 7.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 3.42 ratio
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 8.5" & 8.6" In A 5.13 Ratio (Part No.24163)

High Performance Ring & Pinion Gear Set For GM 8.5" & 8.6" In A 5.13 Ratio

from

$389.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This gear set does not have an ABS provision on the pinion.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 8.50″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 5.13 ratio
See More

Powertrax – Lock Right Locker (Part No.1940-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – No-Slip Traction System (Part No.9207822801)

    No-Slip Traction System

    from

    $544.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Gear Install Kit (Part No.GM8.5OIK)

    Differential Gear Install Kit

    from

    $62.99


    Product Features:
    • 8.5 “O” AXLE MINI INSTALLATION KIT
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM8.5PIK)

    Differential Gear Install Kit

    from

    $59.99


    Product Features:
    • 8.5 “P” AXLE MINI INSTALL KIT
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 13410)

    Differential Cover Gasket

    from

    $11.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    1967 Oldsmobile Cutlass Supreme Differentials

    Maybe you’re in the middle of a full rebuild of that 1967 Oldsmobile Cutlass Supreme. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 32 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1967 Oldsmobile Cutlass Supreme running smoothly.

    Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Oldsmobile Cutlass Supreme. Valvoline, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1967 Oldsmobile Cutlass Supreme, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 7 reviews in this category, some of the top rated parts include Differential Cover Gasket with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1967 Oldsmobile Cutlass Supreme rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1967 Oldsmobile Cutlass Supreme Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Oldsmobile Cutlass Supreme demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Cutlass Supreme the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1967 Oldsmobile Cutlass Supreme, our most popular Driveworks Differentials include:
    Oil Seal
    from $7.79
    (1)
    Oil Seal
    Differential Pinion Seals

    Top 1967 Oldsmobile Cutlass Supreme Differentials from National

    National products are another trusted brand when it comes to Differentials for your 1967 Oldsmobile Cutlass Supreme. Popular National parts include:
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    Differential Pinion Pilot Bearings

    FAQs for 1967 Oldsmobile Cutlass Supreme Differentials

    What are the most purchased Differentials for the 1967 Oldsmobile Cutlass Supreme?

    Out of 32 Differentials for the 1967 Oldsmobile Cutlass Supreme, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Pinion Nut
    from $8.49
    (1)
    Pinion Nut
    Differential Pinion Shaft Nuts

    What are the top-rated 1967 Oldsmobile Cutlass Supreme Differentials?

    Top-rated Differentials for your 1967 Oldsmobile Cutlass Supreme based on customer reviews/ratings are:
    Differential Cover Gasket
    from $11.49
    (1)
    Differential Cover Gasket
    “Correct for 64-69 factory installed rear axle”