1967 Ford Thunderbird Drivetrains
More 1967 Ford Thunderbird Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1967 Ford Thunderbird, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1967 Ford Thunderbird Drivetrains
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Short (Part No.17022)
from
$26.99
9″ Ford Spartan locker cross pin, short.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Ford 9″
- Works with Spartan Locker or standard open spider gears
- Short shaft for four pinion designs
Powertrax – Grip LOK Traction System (Part No.LK444430)
from
$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Grizzly Locker For Ford 9" With 31 Spline Axles (Part No.28009)
from
$929.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 31 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – 9" Ford Pinion Nut, 35 Spline Large Pinion Oversize (Part No.33161)
from
$26.99
9″ Ford pinion nut, 35 spline Large pinion oversize.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Ford 9″ with 35 spline pinion
Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)
from
$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.
Product Features:
See More
Product Features:
- Adapter washer
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Dorman – Prevailing Torque Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-098)
from
$13.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.6930)
from
$28.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1310 U/Joint Size (Part No.41056)
from
$319.99
Yukon yoke (short, for Daytona support) for Ford 9″ with 28 spline pinion and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. 4″ length. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″
- 28 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)
USA Standard Gear – Spool For Ford 9", 35 Spline (Part No.59025)
from
$294.99
9″ FORD 35Spline SPOOL 30deg (EXCL M.WLMS) 2-3/16″ DECK , 2″ Journal .
Product Features:
See More
Product Features:
- Fits Ford 9″ with 35 spline axles
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford (Part No.33296)
from
$10.99
Standard Open & TracLoc pinion gear thrust washer for 7.5″ Ford.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Ford 7.5″
Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline (Part No.20069)
Yukon Gear – Extra HD 3.062" Nodular Iron Dropout For Ford 9" (Part No.32099)
from
$615.99
Yukon Extra HD 3.062″ nodular Iron dropout for Ford 9″. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Rated up to 1200HP!
Product Features:
See More
Product Features:
- Fits Ford 9″
- 3.062″ carrier race diameter
- Nodular iron for added strength
Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)
from
$4.99
Trac Loc clutch guide for 9″ Ford.
Product Features:
See More
Product Features:
- Clutch guide
- Fits Ford 8″ and 9″
USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support (Part No.37039)
from
$249.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM104911 carrier races and Daytona pinion support
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, pilot bearing, thread locker, marking compound with brush and gasket.
National – Bearings (Part No.LM501310)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99155)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Driveworks – Tapered Roller Bearing (Part No.S-25520)
Motive Gear – Differential Ring and Pinion (Part No.F9-350A)
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Mini Spool (Part No.MS88-31)
Pro-King – Differential Clutch Pack (Part No.762B119)
from
$133.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Richmond Gear – Differential Cross Shaft (Part No.CSPF9)
from
$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Popular 1967 Ford Thunderbird Drivetrains Categories
1967 Ford Thunderbird Drivetrains
You count on your 1967 Ford Thunderbird to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 357 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1967 Ford Thunderbird.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, Driveworks, and National. 1967 Ford Thunderbird Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,248 extensive product reviews on 1967 Ford Thunderbird Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.0 stars and Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1967 Ford Thunderbird below to get started!
Top-Rated Drivetrains Brands For Your 1967 Ford Thunderbird
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1967 Ford Thunderbird running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1967 Ford Thunderbird back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1967 Ford Thunderbird, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1967 Ford Thunderbird Drivetrains
What are the most purchased Drivetrains for the 1967 Ford Thunderbird?
Out of 357 Drivetrains for the 1967 Ford Thunderbird, the most popular in our inventory are:
What are the top-rated 1967 Ford Thunderbird Drivetrains?
Top-rated Drivetrains for your 1967 Ford Thunderbird based on customer reviews/ratings are:
from
$4.59
(10)
Universal Joint
“The part was a great mach. it fit real nice and I personally believe it may be better than the OE part because, It has the grease fitting which means ”
