from

$16.49

TAPERED ROLLER BEARI

from

$8.99

Product Features:

Trac Loc spring for Ford 8″ and 9″

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$304.99

Yukon yoke for Ford 9″ with 35 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 9″
35 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$301.99

Yukon standard open spider gear kit for 9″ Ford with 31 spline axles and 2-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Ford 9″ open differential with 31 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$249.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 8″ with aftermarket positraction
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$309.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses carrier bearings & races with an I.D. of 2.000″ and an O.D. of 3.250″. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Ford 9″ with LM104949 carrier races
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush, and gasket.

from

$11.99

8″ dropout housing gasket.

Product Features:

Dropout gasket
Fits Ford 8″

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$46.99

Flat side gear without hub for 9″ Ford with 31 splines.

Product Features:

Side gear without hub
Fits Ford 8″ and 9″ Trac Loc positraction with 31 spline axles

from

$61.99

Chrome Moly cross pin shaft for Mini-Spool for 9″ Ford HD.

Product Features:

Cross pin shaft
Fits Ford 9″
Chromoly steel for added strength

from

$94.99

3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:

Side adjuster
Fits Ford 9″
3.062″ designs only

from

$4.99

Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:

Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$9.99

8″ Ford O-ring.

Product Features:

Pinion support o-ring
Fits Ford 8″

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$284.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Ford 9″ with Daytona pinion support
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$789.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8″ with 31 spline axles
Trac Loc positraction
Clutch style positraction
Aggressive design
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$3.99

Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:

Side adjuster lock bolt

from

$40.99

9.25 Chrysler FRONT PINION KIT , 03 & UP DODGE TRUCK .

Product Features:

Pilot bearing
Fits Ford 8″

from

$68.99

9″ Ford 2 piece solid preload pinion spacer, Daytona or standard.

Product Features:

Crush sleeve eliminator kit for Ford 9″ with 28 spline pinion

from

$4.99

STAR washers, 3.062″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:

Star washer
Fits Ford 9″
3.062″ designs only

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$4.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$11.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$139.99

Trac Loc clutch hub for 9″ Ford with 28 splines.

Product Features:

Clutch hub
Fits Ford 8″ and 9″ 28 spline Trac Loc

from

$877.99

Yukon Extra HD 3.250″ nodular Iron dropout for Ford 9″ with load bolt. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Load bolt design prevents gear deflection under heavy loads. Rated up to 1400HP!

Product Features:

Fits Ford 9″
3.250″ carrier race diameter
Nodular iron for added strength
Load-bolt design reduces ring gear deflection under high horsepower

1967 Ford Falcon Differentials

More 1967 Ford Falcon Differentials

Essential 1967 Ford Falcon Differentials

FAG US – TAPERED ROLLER BEARI (Part No.KT5)

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Yoke For Ford 9" With 35 Spline Pinion And A 1350 U/Joint Size (Part No.41058)

Yukon Gear – Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 2-Pinion Design (Part No.16033)

USA Standard Gear – Master Overhaul Kit for the Ford 8" Differential w/ HD Posi (Part No.37029)

Yukon Gear – Master Overhaul Kit For Ford 9" LM104911 Differential (Part No.14055)

Yukon Gear – 8" Dropout Housing Gasket (Part No.23010)

Felpro – Differential Cover Gasket (Part No.RDS 13073)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – Flat Side Gear Without Hub For 9" Ford With 31 Splines (Part No.16162)

Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 9" Ford (Part No.32235)

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Felpro – Differential Carrier Gasket (Part No.RDS 13270)

Yukon Gear – 8" Ford O-Ring (Part No.30027)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13045)

Yukon Gear – Trac-Loc For Ford 8" Wtih 31 Spline Axles – Aggressive Design (Part No.26003)

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Yukon Gear – Pilot Bearing For Ford 8" (Part No.18043)

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 9" (Part No.55041)

Yukon Gear – Star Washers, 3.062" Ford 9" Drop Out New Design Only (Part No.32143)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Driveworks – Oil Seal (Part No.S-7044NA)

National – Bearings (Part No.HM89410)

Yukon Gear – Trac Loc Clutch Hub For 9" Ford With 28 Splines (Part No.16159)

Yukon Gear – Extra HD 3.250" Nodular Iron Dropout For Ford 9" With Load Bolt (Part No.32151)

Popular 1967 Ford Falcon Differentials Categories

1967 Ford Falcon Differentials

Differentials Brands To Make Your 1967 Ford Falcon Last

Popular Felpro Differentials

Top 1967 Ford Falcon Differentials from Driveworks

FAQs for 1967 Ford Falcon Differentials

What are the most purchased Differentials for the 1967 Ford Falcon?

What are the top-rated 1967 Ford Falcon Differentials?

More Popular Parts for All Makes