1967 Ford Fairlane Performance Exhaust Products

Essential 1967 Ford Fairlane Performance Exhaust Products

Hooker Headers – Super Comp. Header (Part No.6210HKR)

Super Comp. Header

from

$999.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Hooker Headers – Competition Header (Part No.6901HKR)

Competition Header

from

$283.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – Super Comp. Header (Part No.6201HKR)

Super Comp. Header

from

$944.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Hooker Headers – Super Comp. Header (Part No.6116-1HKR)

Super Comp. Header

from

$1317.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Hooker Headers – Competition Header (Part No.6901-2HKR)

Competition Header

from

$824.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

from

$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)

40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)

50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

from

$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowtech – Power Steering Pump Bracket (Part No.10041FLT)

Power Steering Pump Bracket

from

$38.49


Product Features:
  • Chrome Plated
  • Show Quality
  • For Custom Installations
See More

Mr. Gasket – Alternator Bracket (Part No.5185)

Alternator Bracket

from

$38.49
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.

Product Features:
  • Fits Small Block Ford 1965-’69 – OEM Style
  • Polished To High Luster
  • Chrome Plated For Lasting Beauty
See More

Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7262)

Exhaust Manifold Gasket Set for Ford

from

$28.99
Product Features:
  • Designed To Match Port Openings Of Cylinder Heads
  • Excellent Free-Flowing Seal
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)

Exhaust Manifold Gasket Set

from

$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Aluminum Exhaust Gasket (Part No.7410G)

Aluminum Exhaust Gasket

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Reusable header, exhaust manifold and collector flange gaskets
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)

Exhaust Manifold Gasket Set

from

$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)

Exhaust Manifold Gasket Set

from

$26.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7160)

Copper Seal: Exhaust Gasket Set

from

$60.29
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

Product Features:
  • Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
  • Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
  • .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
  • Provides excellent sealing and durability
  • Conforms to and seals minor surface irregularities
  • For high performance street, drag race, oval track and turbocharged (extreme heat) applications
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1419)

Exhaust Manifold Gasket Set

from

$26.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Exhaust Gasket Set (Part No.254G)

Exhaust Gasket Set

from

$35.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Precision Die Cut
See More

Flowmaster Inc. – Header-back System – Dual Rear Exit – American Thunder – Moderate Sound (Part No.17289)

Header-back System - Dual Rear Exit - American Thunder - Moderate Sound

from

$875.99
For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More

1967 Ford Fairlane Performance Exhaust Products

Maybe you’re in the middle of a full rebuild of that 1967 Ford Fairlane. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 20 different Performance Exhaust Products in our inventory ranging from $29.49 to $875.99. That means you can find the exact parts or products you need to keep that 1967 Ford Fairlane running smoothly.

Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Ford Fairlane. Mr. Gasket, Hooker Headers, and Flowmaster Inc. are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Exhaust Products for your 1967 Ford Fairlane, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1967 Ford Fairlane rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Exhaust Products Brands To Make Your 1967 Ford Fairlane Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Ford Fairlane demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Fairlane the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.

Popular Mr. Gasket Performance Exhaust Products

We carry Mr. Gasket parts in our stock across Performance Exhaust Manifold Gaskets categories, plus more. For a 1967 Ford Fairlane, our most popular Mr. Gasket Performance Exhaust Products include:
Aluminum Exhaust Gasket
from $42.99
(1)
Aluminum Exhaust Gasket
Performance Exhaust Manifold Gaskets
Exhaust Gasket Set
from $29.49
(1)
Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
Ultra Seal: Exhaust Gasket Set
from $37.49
(1)
Ultra Seal: Exhaust Gasket Set
Performance Exhaust Manifold Gaskets

Top 1967 Ford Fairlane Performance Exhaust Products from Flowmaster Inc.

Flowmaster Inc. products are another trusted brand when it comes to Performance Exhaust Products for your 1967 Ford Fairlane. Popular Flowmaster Inc. parts include:

FAQs for 1967 Ford Fairlane Performance Exhaust Products

What are the most purchased Performance Exhaust Products for the 1967 Ford Fairlane?

Out of 20 Performance Exhaust Products for the 1967 Ford Fairlane, the most popular in our inventory are:
Competition Header
from $283.99
This product is not rated
Competition Header
Performance Exhaust Headers
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
from $123.99
This product is not rated
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
Copper Seal: Exhaust Gasket Set
from $60.29
This product is not rated
Copper Seal: Exhaust Gasket Set
Performance Exhaust Manifold Gaskets