1967 Ford Custom Performance Engines

Essential 1967 Ford Custom Performance Engines

Edelbrock – TIMING CHAIN (Part No.7844)

TIMING CHAIN

from

$29.99
Product Features:
  • Timing Chain Only
See More

Mr. Gasket – Rear Main Seal Gasket (Part No.1963)

Rear Main Seal Gasket

from

$42.49
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Silicone Rubber to Withstand Extreme Engine Oil Temperatures
  • Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
  • Injection Molded for Precise Fit
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.31-238-3)

Xtreme Energy 218/224 Hydraulic Flat Cam

from

$257.99
HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, stock converter, 3.23-4.10 gear.

Product Features:
  • HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, stock converter, 3.23-4.10 gear.
  • 262/270 Advertised Duration, 218/224 Duration @ .050″, .493″/.500″ Lift, 110 Lobe Separation
  • Valve spring upgrade required
  • 289-302 Firing Order
See More

Mr. Gasket – Intake Manifold Bolts (Part No.958G)

Intake Manifold Bolts

from

$19.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers

Product Features:
  • Hex Head
  • Zinc Plated
  • Ideal For Minimal Space
  • 12-Point Head And Flange
  • Zinc Plated For Protection
See More

Edelbrock – RPM Air-Gap Small Block Ford 351W Intake Manifold (Part No.7581)

RPM Air-Gap Small Block Ford 351W Intake Manifold

from

$468.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Improve performance on the street or race track. Larger cross-sectional area and taller card flange. Compatibility with large displacement 351W based engines. For 4 bbl carbs. Available in cast, polished and endurashine finish.

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed For 1500 To 6500 RPM
  • Designed For Street And High Performance
  • Larger Cross Sectional Area
  • Taller Carb Flange
  • Compatibility w/Large Displacement 351W Based Eng.
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6683)

Ultra Seal: Oil Pan Gasket

from

$59.19
High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:
  • Steel core provides rigidity, durability and prevents gasket push out
  • Molded rubber coating seals minor irregularities in pan surface
  • One piece design is easier to install and even less prone to leak
  • Direct replacement suitable for all uses – street, racing, heavy duty
  • Include both gasket and new oil pan bolts
  • No Cork Particles
  • Easy Removal For Disassembly
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1018)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$49.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Mr. Gasket – Cam Change Gaskets (Part No.4410)

Cam Change Gaskets

from

$63.09
If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.

Product Features:
  • Contains all the gaskets needed to change out your camshaft
  • Fuel Injector O-Ring Not Included
  • Meets Performance Standards
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Mr. Gasket – Intake Gasket (Part No.223)

Intake Gasket

from

$35.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits 1977-1997 Ford Small Block 351 Windsor 2 or 4-barrel.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)

Ultra Seal: Intake Gasket

from

$42.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5870)

Ultra Seal: Valve Cover Gasket Set

from

$36.49
Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are .187 inch thick.

Product Features:
  • Manufactured from high-density cork /rubber blend gasket material
  • A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
  • Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
  • For OE replacement, high performance street, drag race and oval track
  • .187″ thick
  • Handles Ex Flange Pressure
  • Forms Leak Proof Seal
  • Black Latex Coating
See More

Mr. Gasket – Valve Cover Gasket Set (Part No.278)

Valve Cover Gasket Set

from

$41.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

289-302 Ford Head Bolt Kit

from

$107.99


Product Features:
  • Highest Quality Head Bolts
  • Cold-Formed/Heat Treated
  • Ensures Molecular Integrity
  • Reduced Diameter Bolt Heads
  • Hardened/Parallel-Ground Washers Included
  • Rated At 170000 psi
  • Manufactured By ARP
See More

Spectre – Water Neck; Ford 429-460 (Part No.4734)

Water Neck; Ford 429-460

from

$54.99
Spectre’s Ford V8 water neck fits Ford 429 – 460 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes sealing O-ring, and has a 3/8 inch NPT threaded hole for the Ford temp sensor.

Product Features:
  • Fits Ford 429 – 460 engines
  • Has a 3/8 inch NPT threaded hole for temperature sensor
  • Includes sealing O-ring
  • Chrome plated
  • Easy to install
  • Hardware not included
See More

Spectre – Water Neck; 351C (Part No.4735)

Water Neck; 351C

from

$28.99
Spectre’s Ford water neck fits Ford 351 Cleveland engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts and sealing O-ring.

Product Features:
  • Fits Ford 351 Cleveland
  • Includes sealing O-ring and bolts
  • Chrome plated
  • Easy to install
See More

Edelbrock – Water Pump for Small-Block Ford in Polished Finish (Part No.8846)

Water Pump for Small-Block Ford in Polished Finish

from

$381.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Water Pump for Small-Block Ford 351W in Black Finish (Part No.88433)

Water Pump for Small-Block Ford 351W in Black Finish

from

$358.99
Edelbrock #88433 Water Pump Ford 1970-78 302 & 1970-87 351w v8 black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cool

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 5.70 in. Block To Hub Height
  • Black Finish
See More

Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

Pushrod Set for Small Block Ford 289-302

from

$210.99
Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Edelbrock – Pushrod Set for Ford 351M/400 (Part No.9633)

Pushrod Set for Ford 351M/400

from

$188.99
Product Features:
  • 9.5 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More

Mr. Gasket – Precision Timing Tape (Part No.1594)

Precision Timing Tape

from

$21.79
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:
  • 6 3¿8″ diameter
  • 6 3┐8″ diameter
  • 289-302-351 cu. in.
  • Increased Performance
  • Set Valve Lash At Proper Time
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Edelbrock – NHRA Legal Ford FE 428 Cylinder Head (Part No.60058)

NHRA Legal Ford FE 428 Cylinder Head

from

$567.99


Product Features:
  • Out-of-the-Box Bolt-On Performance
  • Valves Promote Excellent Flow For Streetable Power
  • NHRA Accepted For Stock And Super Stock
  • Thicker Deck Surfaces than Other Brands
  • NHRA Accepted for Stock/Super Stock
See More

Edelbrock – Performer Small-Block Ford 2.02" Cylinder Head Hydraulic Flat Tappet (Part No.60359)

Performer Small-Block Ford 2.02" Cylinder Head Hydraulic Flat Tappet

from

$893.99
Product Features:
  • Made of aluminum with a natural finish
  • 60cc chambers with 170cc intake ports
  • 2.02 in. intake and 1.60 in. exhaust valves
  • Includes intake valves, exhaust valve, valve springs, retainers, locks, guide plate and valve stem seals
  • Does not include damper spring, rocker arms, nuts and drilled steam holes
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST

from

$237.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:
  • Cost effective aluminum construction provides superior strength to weight ratio
  • Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
  • Durable design increases valve lift while withstanding the rigors of moderate race use
  • Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
See More

Competition Cams – Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud (Part No.19043-16)

Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud

from

$427.99
These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Ford V8 289-302-351W applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

Product Features:
  • CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
  • Designed for high performance street and race engines
  • Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
  • Additional clearance, up to 1.650″ O.D. valve spring
See More

1967 Ford Custom Performance Engines

Maybe you’re in the middle of a full rebuild of that 1967 Ford Custom. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 53 different Performance Engines in our inventory ranging from $19.99 to $1,035.99. That means you can find the exact parts or products you need to keep that 1967 Ford Custom running smoothly.

Performance Engines are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Ford Custom. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1967 Ford Custom, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 39 reviews in this category, some of the top rated parts include Ultra Seal: Valve Cover Gasket Set with 4.7 stars and Engine Valve Cover Gasket Set with 5.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1967 Ford Custom rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1967 Ford Custom Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Ford Custom demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Custom the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Spectre Performance Engines

We carry Spectre parts in our stock across Performance Water Outlets categories, plus more. For a 1967 Ford Custom, our most popular Spectre Performance Engines include:
Water Neck; Ford 390-428
from $47.99
(1)
Water Neck; Ford 390-428
Performance Water Outlets

FAQs for 1967 Ford Custom Performance Engines

What are the most purchased Performance Engines for the 1967 Ford Custom?

Out of 53 Performance Engines for the 1967 Ford Custom, the most popular in our inventory are:
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
Intake Manifold Bolts
from $19.99
(1)
Intake Manifold Bolts
Performance Intake Manifold Hardware
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $51.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets

What are the top-rated 1967 Ford Custom Performance Engines?

Top-rated Performance Engines for your 1967 Ford Custom based on customer reviews/ratings are:
Ultra Seal: Valve Cover Gasket Set
from $36.49
(3)
Ultra Seal: Valve Cover Gasket Set
“Excellent product. Highly recommend. Easy to install. Quick delivery of order.”
Engine Valve Cover Gasket Set
from $46.99
(1)
Engine Valve Cover Gasket Set
“good”
Intake Manifold Gasket for 1963-1996 Small-Block Fords
from $28.99
(1)
Intake Manifold Gasket for 1963-1996 Small-Block Fords
“Minor fitment corrections to line up with my AFR185 heads and Victor Jr Intake.”