1967 Buick LeSabre Performance and Racing Products

Essential 1967 Buick LeSabre Performance and Racing Products

Motive Gear – Differential Mini Spool (Part No.MS10C-28)

Differential Mini Spool

from

$98.99


Product Features:
  • MINI SPOOL GM 10 BOLT 8.2″ 28 SPLINE
See More

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-300-400+ Hp) (Part No.70056)

Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-300-400+ Hp)

from

$1243.99
Designed for carburetor V8 engines. Power increases from 200 to 400 horsepower. Simple to install. Shorter spray bars. More even distribution across the plenum. A more balanced air and fuel ratio. Quicker response time.

Product Features:
  • Designed For Carbureted V8 Engines
  • Power Increases From 200-400_ HP
  • Simple To Install
  • Shorter Spray Bars
  • More Even Distribution Across The Plenum
  • A More Balanced Air/Fuel ratio
  • Quicker Response Time
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)

Unilite Breakerless Ignition Conversion Kit

from

$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Accel – Distributor Cap And Rotor Kit (Part No.8123)

Distributor Cap And Rotor Kit

from

$40.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3167R)

Control Arm Bushing Set

from

$55.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

B & M – Traveler Converter (Part No.30423)

Traveler Converter

from

$375.99
Torque Converter – Traveler Converter (SUV and Light Truck) for GM 1968 to 1981 TH350, TH375B APPLICATION: GM 1968 to 1981 TH350, TH375B (6) (will not fit TH-350C) Provides slightly higher stall speed than stock to improve pulling power at low speeds. New

Product Features:
  • Ideal For Motor Homes
  • Ideal For Towing Applications
  • Precision Pump Drive Tube
  • Heavy Duty Needle Bearings
  • Furnace Brazed
See More

Accel – High Performance Contact Set 32 Oz (Part No.110128)

High Performance Contact Set 32 Oz

from

$46.99
ACCEL high-performance 32 ounce points resist point float up to 6,500 RPM. Extra-thick contact arms prevent flexing. Large tungsten contacts provide crisp circuit-breaking for peak coil output. Phenolic rubbing blocks endure heavy spring loads.

Product Features:
  • Extra Thick Contact Arms
  • Large Radius Tungsten Contacts
  • High Strength Phenolic Rubbing Blocks
  • Prevents Points Float
  • Moisture-Proof Buna-N Condenser
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5183G)

Sway Bar Bushing Set

from

$29.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Track Arm Bushing Set (Part No.3.7111G)

Track Arm Bushing Set

from

$24.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

Automatic Shifter, Light Truck Megashifter

from

$467.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

Product Features:
  • Universal Floor Mount Application
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • NHRA/IHRA Reverse Lockout Meets Requirements
  • Use w/Reverse Pattern Valve Body
  • Includes Neutral Safety Switch
  • Includes Backup Light Switch
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Accel – Adjustable Vacuum Advance, GM V8 Point Distributor (Part No.31034)

Adjustable Vacuum Advance, GM V8 Point Distributor

from

$46.99
Comes with detailed instructions. Permits infinite adjustment. Instantly increase your horsepower. Maximum possible spark advance. Not legal for sale or use in CA.

Product Features:
  • Adjustable Vacuum Advance
  • Increases Horsepower And Throttle Response
  • Includes Allen Wrench For Adjustments
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3132G)

Control Arm Bushing Set

from

$154.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)

Coil; Blaster 2; High Performance

from

$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:
  • Improved output coil for electronic ignitions
  • Works w/Blaster Ignition Or MSD 5/6/7 Series
  • Ballast Resistor Required If Used w/Stock Points Ignition
  • Alkyd tower w/high dielectric properties lessens carbon tracking
See More

Energy Suspension – Strut Rod Bushing Set (Part No.3.7114G)

Strut Rod Bushing Set

from

$23.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Strut Rod Bushing Set (Part No.3.7114R)

Strut Rod Bushing Set

from

$22.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Mr. Gasket – Alternator Bracket (Part No.4954)

Alternator Bracket

from

$16.99
Dress up your engine. These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:
  • Heavy gauge steel
  • Polished to high luster
  • Chrome plated for lasting beauty
See More

Mr. Gasket – Side Mount Alternator Bracket (Part No.9852)

Side Mount Alternator Bracket

from

$22.99
Side mount header bracket. Made from heavy gauge chrome plated steel, these brackets are used to mount the alternator on small block Chevy applications.

Product Features:
  • Heavy gauge
  • Chrome plated steel
See More

Accel – Points Eliminator Kit (Part No.2010)

Points Eliminator Kit

from

$98.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • More Accurate Ignition Timing
  • Improves Performance And Fuel Economy
  • Provides More Accurate Ignition Timing
  • Easy To Install w/Hand Tools
  • Reduced Maintenance
  • Thermal Clad Based Surface Mount Construction
  • Utilizes Specialized Electronic Circuitry
  • Ignition Timing Is Stable From 1 To 10000rpm
See More

Edelbrock – Performer RPM; Nitrous Systems (Part No.70092)

Performer RPM; Nitrous Systems

from

$766.99


Product Features:
  • Designed For Carbureted V8s
  • Power Increases From 100-250 HP
  • Precision EDM Machined Spray Bars
  • Simple To Install
See More

Edelbrock – Nitrous Performer EFI Wet System (Part No.71820)

Nitrous Performer EFI Wet System

from

$730.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Mr. Gasket – Throttle Cable Bracket (Part No.9885)

Throttle Cable Bracket

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More

Hays – Street; Clutch Kit (Part No.85-111)

Street; Clutch Kit

from

$701.99
Matched assembly for maximum reliability. An excellent choice for high performance street applications.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
  • Designed for Street And Street Strip Applications
See More

Hays – Street/Strip; Clutch Kit (Part No.85-103)

Street/Strip; Clutch Kit

from

$483.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
See More

Hays – Street; Clutch Kit (Part No.85-112)

Street; Clutch Kit

from

$563.99
Matched assembly for maximum reliability. An excellent choice for high performance street applications.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
  • Designed for Street And Street Strip Applications
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$36.99
Brake Bleeder Screws

1967 Buick LeSabre Performance and Racing Products

You count on your 1967 Buick LeSabre to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 43 Performance and Racing Products ranging in price from $5.99 to $1,243.99, you’re sure to find everything you need for your 1967 Buick LeSabre.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 10 different brands like Energy Suspension, Accel, and Earls Performance Product. 1967 Buick LeSabre Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 41 extensive product reviews on 1967 Buick LeSabre Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Distributor Cap And Rotor Kit with 4.3 stars and Automatic Shifter, Unimatic Shifter with 4.3 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1967 Buick LeSabre below to get started!

Top-Rated Performance and Racing Products Brands For Your 1967 Buick LeSabre

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1967 Buick LeSabre running right for years to come. In our inventory you’ll find brands like Energy Suspension, Accel, Earls Performance Product, and even more.

Popular Mallory Performance and Racing Products

You’ll find popular Mallory brand products across Performance Ignition Products. All are waiting to get your 1967 Buick LeSabre back on the road. Some of the top-rated Mallory products in these categories are:
Unilite Breakerless Ignition Conversion Kit
from $113.99
(1)
Unilite Breakerless Ignition Conversion Kit
Performance Ignition Parts

Top-Rated Performance and Racing Products


If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 1967 Buick LeSabre, and some of our most reviewed parts include:
Coil; Blaster 2; High Performance
from $71.99
(20)
Coil; Blaster 2; High Performance
Performance Coils

FAQs for 1967 Buick LeSabre Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1967 Buick LeSabre?

Out of 43 Performance and Racing Products for the 1967 Buick LeSabre, the most popular in our inventory are:
Sway Bar End Link Kit
from $25.99
(7)
Sway Bar End Link Kit
Performance Sway Bar Link Kits
Tie Rod Dust Boot
from $9.99
(1)
Tie Rod Dust Boot
Performance Tie Rod End Boots
Tie Rod Dust Boot
from $5.99
This product is not rated
Tie Rod Dust Boot
Performance Tie Rod End Boots

What are the top-rated 1967 Buick LeSabre Performance and Racing Products?

Top-rated Performance and Racing Products for your 1967 Buick LeSabre based on customer reviews/ratings are:
Distributor Cap And Rotor Kit
from $40.99
(3)
Distributor Cap And Rotor Kit
“the distributer cap has copper electrodes not like the cheeper aluminum electrodes you get in other distributer caps. the rotor had no screws. had to ”
Automatic Shifter, Unimatic Shifter
from $259.99
(3)
Automatic Shifter, Unimatic Shifter
“Super easy to install, works nice.”
Contact And Condenser Kit
from $51.99
(1)
Contact And Condenser Kit
“.”