1966 Pontiac Grand Prix Cooling and Climate Controls

Name: Engine Coolant Thermostat Gasket
Brand: Victor Reinz
SKU: 71-13549-00
Price: 5.79 USD

Below you will find various in-demand Pontiac Cooling and Climate Controls, components and accessories for your 1966 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Blower Motor and Related Products, Engine Cooling Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Grand Prix model years including 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and more. Select a category of 1966 Pontiac Grand Prix Cooling and Climate Controls below and start saving instantly.

Popular 1966 Pontiac Grand Prix Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Radiator Fan Clutch

Engine Coolant Thermostat Housing Caps

Radiator Caps

AC Compressor Without Clutch

Coolant Temperature Sensors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Water Outlets

AC Line O-Rings

Thermostat Housing Gaskets

Thermostat and Water Outlet Gaskets

Temperature Switch and Senders

Water Pump Gaskets

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

AC Compressor Switch Connectors

Coolant Temp Sending Unit Switch Connectors

Radiator Cap Adapters

AC Compressor Thrust Bearings

HVAC Blower Motor Relay Connector

Essential Cooling and Climate Controls for 1966 Pontiac Grand Prixes

from

$5.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$25.52

An ACDelco Professional, premium aftermarket Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is the ideal high quality replacement for your GM vehicle. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This premium aftermarket replacement engine coolant thermostat is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
Professional, premium aftermarket replacement engine coolant thermostat
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$181.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$478.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability

from

$31.99

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$16.79

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$9.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$31.99

Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:

Edge Molded Rubber Water Outlet Gasket Is Reusable
Requires No Gasket Sealer
Solid Aluminum Carrier For Strength/rigidity
Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled

from

$14.79

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$2.04

Water Pump Hsng Gask

from

$124.50

ACDelco GM Original Equipment Blower Motors and Wheels are electrical motor and fan assemblies that push air through your vehicle’s heating and air conditioning system and are GM-recommended replacements for your vehicle’s original components. These original equipment blower motors and wheel assemblies have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Permanently lubricated, self-aligning bearings designed for long life and dependable performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$347.99

Black Magic Electric Fan

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$82.97

Coupling #9125615 is needed when replacing earlier version #1259327 Heater Valve. Vehicle manufactures often use several sources for heater valves on a particular model. For that reason the replacement valve supplied may not always look exactly like the valve being replaced. In these instances the part supplied will fit and function to O.E. specifications.

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$60.99

New Goodmark Correct Reproduction RC-15 Radiator Cap

Product Features:

Rc-15,Correct Reproduction
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$7.29

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$54.99

BEARING

from

$168.99

New Platinum Pro Radiator, 3.1 Liter, 3.4 Liter And 3.8 Liter Engines, With 5/8 Inch Thick Core

Product Features:

3.1 Liter, 3.4 Liter And 3.8 Liter Engines, With 5/8 Inch Thick Core, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$80.99

GM Genuine Parts A/C Compressor Clutches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C compressor clutches are what engage and disengage the compressor. The compressor clutch consists off a pulley, pressure plate and electromagnetic coil. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Engages compressor
Consists of pulley, pressure plate, and electromagnetic coil
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$7.03

Dorman offers a variety of Radiator Drain Petcocks for a range of applications. The high-quality design ensures effective draining of the cooling system. Features and Benefits

Product Features:

Available in several styles, including standard, screw-in, and push-in with captive thread
Direct replacement Radiator Drain Petcocks available (where applicable) to ensure a proper fit
Durably engineered for a long service life
Easy to use, no need to disconnect any of the radiator hoses

from

$52.99

An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Product Features:

All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
Thoroughly tested for reliable, leak-free performance
Coated seals support seal longevity and durability
Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
High-quality bearings are permanently sealed and lubricated for greater durability and long life
Come with premium, high-quality replacement components needed for trouble-free and accurate installation
Uniform wall sections and smooth coolant-flow cavities for efficient operation
Cast-iron or aluminum design, depending on vehicle application

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Upgrade your 1966 Pontiac Grand Prix with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1966 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 70 Cooling and Climate Controls for the 1966 Pontiac Grand Prix, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1966 Pontiac Grand Prix at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.79 to $569.99, with an average price of $70.04. Our 70 Cooling and Climate Controls in stock come from 17 trusted brands, so you’re sure to find the right part for your 1966 Pontiac Grand Prix without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Pontiac Grand Prix, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, FELPRO, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $3.99, and at an average 5 stars rating. With 2,090 customer reviews and counting, our 1966 Pontiac Grand Prix Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1966 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place. Start shopping confidently below for your 1966 Pontiac Grand Prix!

Best-Selling Blower Motor and Related Products for 1966 Pontiac Grand Prixes

Enhance the driving experience in your Pontiac with 6 quality Blower Motor and Related Product components, starting at $5.29.

show more show less

from

$34.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$49.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$29.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$18.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Galvanized steel construction
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$19.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Galvanized steel construction
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$5.29

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Popular 1966 Pontiac Grand Prix Engine Cooling Parts

Customize your Pontiac with 48 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $569.99.

show more show less

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$9.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$86.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$10.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$2.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$22.99

Belt-Driven Fan Spacer Kit

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$9.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$14.29

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$13.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$85.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$319.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$47.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$25.49

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$18.29

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$15.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$35.99

ACDelco Professional Engine Coolant Temperature Sender is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sender is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$9.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$21.99

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications. Feature a brass and copper valve assembly with a stainless steel body for durability. This 180 Deg F thermostat is a bolt-on OEM style replacement that measu

Product Features:

53mm Diameter
Rated For 180 Degrees
High Flow Type
OE Style
Made in The USA

from

$27.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$46.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$14.29

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$21.99

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications. Feature a brass and copper valve assembly with a stainless steel body for durability. This 160 Deg F thermostat is a bolt-on OEM style replacement that measu

Product Features:

54mm Diameter
Rated For 160 Degrees
High Flow Type
OE Style
Made in The USA

from

$125.99

Product Features:

Designed, tested, and built by application
OE performance, fit, and appearance
Precision machined
Out of box installation

from

$7.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$21.99

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$4.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$60.99

New Goodmark Correct Reproduction RC-15 Radiator Cap

Product Features:

Rc-15,Correct Reproduction
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$569.99

27 in. Electric Fan

from

$519.99

X-Treme S-Blade Electric Fan

from

$125.99

Trimline Straight Blade Electric Fan

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$23.99

The engine coolant temperature sender, not to be confused with the engine coolant temperature sensor, is located anywhere within the engine cooling system, and contains a thermistor that changes in resistance value as the thermistors ambient temperature changes. The engine coolant temperature sender is fed 12 volts and is typically used in conjunction with a gauge in the instrument cluster to provide a visual representation of the engine coolant temperature condition.

Product Features:

Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Thermally conductive grease within the housing providing the most accurate temperature transfer from the engine to the thermistor.
Plated brass or aluminum housings to prevent housing corrosion, ensures effective heat distribution to thermal element, and ensure a secure and leak-free thread mount.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.

from

$19.79

Belt-Driven Fan Spacer Kit

from

$19.49

Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Thermally conductive grease within the housing providing the most accurate temperature transfer from the engine to the thermistor.
Plated brass or aluminum housings to prevent housing corrosion, ensures effective heat distribution to thermal element, and ensure a secure and leak-free thread mount.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.

from

$17.99

Belt-Driven Fan Spacer Kit

from

$5.29

Premium quality materials for longer service life
Designed for the OE distributor as a direct replacement part

from

$2.79

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top Picks for 1966 Pontiac Grand Prix Heating Parts

Upgrade Pontiac Grand Prixes with top-quality Heating Parts parts, including 3 OEM and aftermarket selections for your 1966 model.

show more show less

from

$70.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$69.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$27.49

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

In-Demand Air Conditioning Parts for 1966 Pontiac Grand Prixes

Select from 13 premium Air Conditioning Parts parts for your 1966 Pontiac Grand Prix, with prices ranging from $4.99 to $478.99.

show more show less

from

$22.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Precision machined ports

from

$349.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$281.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$22.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$303.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$478.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability

from

$43.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$16.79

from

$6.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

New GM Frigidaire/Harrison A6 Radial Clutch Assembly w/ Coil

from

$136.99

Product Features:

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$54.99

BEARING

from

$4.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top-Rated Cooling and Climate Controls Brands For Your 1966 Pontiac Grand Prix

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1966 Pontiac Grand Prixes. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 1966 Grand Prix start at just $3.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1966 Pontiac Grand Prix Cooling and Climate Controls

When it comes to maintaining or upgrading your 1966 Pontiac Grand Prix, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1966 Pontiac Grand Prix. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular FELPRO 1966 Pontiac Grand Prix Cooling and Climate Controls

FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1966 Pontiac Grand Prix owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 1966 Grand Prix, Advance Auto Parts carries a full inventory of 1 FELPRO Cooling and Climate Controls. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range up to $3.99, plus, with more than 100 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$3.99

(100)

Engine Coolant Outlet Gasket

“Perfect fit”

FAQs for 1966 Pontiac Grand Prix Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1966 Pontiac Grand Prixes?

Out of 70 Cooling and Climate Controls that fit 1966 Pontiac Grand Prixes, the following parts are the top sellers:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Engine Coolant Outlet Gasket (5185300) – $3.99
Standard Thermostat: 180 Degrees (5653053) – $9.99

What’s the price range for 1966 Pontiac Grand Prix Cooling and Climate Controls?

Cooling and Climate Control prices for the 1966 Pontiac Grand Prix start at $2.79 and go up to $569.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1966 Pontiac Grand Prix?

The average price for Cooling and Climate Controls for the 1966 Pontiac Grand Prix is $70.04. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Pontiac Grand Prix model years?

Yes, we currently carry Cooling and Climate Controls for 46 model years of Pontiac Grand Prixes between 1962 and 2008. Cooling and Climate Controls are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, and 2000.

What are the cheapest Cooling and Climate Controls for my 1966 Pontiac Grand Prix?

The cheapest 1966 Pontiac Grand Prix Cooling and Climate Controls we carry in stock are:

Engine Coolant Outlet Gasket (12547712) – $2.79
Drain Cock-Brass-Screw In Style-1/8 In. NPT (5013119) – $2.99
Engine Coolant Outlet Gasket (5185300) – $3.99
Radiator Drain Cocks (5702720) – $4.99
HVAC Power Servo Connector (12447179) – $4.99

What are the top-rated Cooling and Climate Controls that fit the 1966 Pontiac Grand Prix?

Out of 2,090 reviews by customers, our 1966 Pontiac Grand Prix Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1966 Pontiac Grand Prix and their top-rated products:

Air Conditioning Parts
- A/C TXV O-Ring Expansion Valve (5892465) – $22.99
- Reman GM A6 Compressor w/ Clutch (5880599) – $349.99
- Reman GM A6 Compressor w/ Clutch (5890632) – $281.99
Blower Motor and Related Products
- A/C TXV O-Ring Expansion Valve (5892465) – $22.99
- Reman GM A6 Compressor w/ Clutch (5880599) – $349.99
- Reman GM A6 Compressor w/ Clutch (5890632) – $281.99
Engine Cooling Parts
- A/C TXV O-Ring Expansion Valve (5892465) – $22.99
- Reman GM A6 Compressor w/ Clutch (5880599) – $349.99
- Reman GM A6 Compressor w/ Clutch (5890632) – $281.99

What types of Cooling and Climate Controls do you sell for my 1966 Pontiac Grand Prix?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1966 Pontiac Grand Prix:

Can I get help with 1966 Pontiac Grand Prix Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Cooling and Climate Controls and more.

What is your return policy for Pontiac Grand Prix Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1966 Pontiac Grand Prix Cooling and Climate Controls

Victor Reinz – Engine Coolant Thermostat Gasket (Part No.71-13549-00)

ACDelco – Professional Engine Coolant Thermostat (Part No.G4000204537ACD)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-961)

Carquest Premium – New Compressor with Clutch, GM A6 (Part No.T58098)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84841)

Carquest Premium – A/C Harness Connector (Part No.T37201)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle (Part No.902-2027)

Mahle – Water Pump Hsng Gask (Part No.G3031212899MAH)

ACDelco – GM Original Equipment Heating and Air Conditioning Blower Motor (Part No.R2031304373ACD)

Flex A Lite – Black Magic Electric Fan (Part No.160)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Professional Parts Sweden – Heater Valve (Part No.R302064589PPS)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

KAI – Radiator Cap (Part No.GMK404030657)

Carquest – Engine Coolant Temperature Switch (Part No.WT357)

Felpro – Engine Water Pump Gasket (Part No.5152)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Carquest Premium – A/C Dark Grey Porous Orifice Tube (Part No.T38645)

FAG US – BEARING (Part No.5908-VAW)

KAI – Radiator (Part No.RAD1519)

GM Genuine Parts – Air Conditioning Compressor Clutch (Part No.15-4685)

Dorman – Radiator Drain Petcocks (Part No.G10051333557DOR)

ACDelco – Water Pump Kit (Part No.252-721)

Dorman – 5-Wire Style Relay (Part No.85170)

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Carquest Premium – Blower Motor: With Wheel (Part No.35334)

Carquest Premium – Blower Motor: With Wheel (Part No.35345)

Carquest Premium – Blower Motor: Without Wheel (Part No.35588)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35601)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35602)

Carquest Premium – A/C Compressor Clutch Relay Connector (Part No.PTA1269)

Felpro – Engine Coolant Outlet Gasket (Part No.35062)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13358)

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13356)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Heavy Duty Fan Clutch – Thermal 7" Standard Rotation (Part No.215046)

Carquest Premium – Standard Thermostat: 205 Degrees (Part No.13352)

Dorman – Help – Drain Cock-Brass-Screw In Style-1/8 In. NPT (Part No.61103)

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14556)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13359)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Motorad UltraStats – Thermostat: 180 Degrees (Part No.5200-180)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10330)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4062)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.433165)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84843)

Motorad UltraStats – Thermostat: 195 Degrees (Part No.5200-195)

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1045)

ACDelco – Engine Coolant Temperature Sensor (Part No.G1852)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10226)

Edelbrock – High Performance 180 Degree Thermostat for Improved Engine Efficiency (Part No.8604)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471B)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Edelbrock – High Performance Thermostat (53mm) – 160 Deg (Part No.8603)

Carquest Premium – Universal Standard Rotation Thermal Heavy Duty Fan Clutch (Part No.216087)

Dorman – Help – Radiator Drain Cocks (Part No.61132)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-2024)

Dorman – Help – Radiator Drain Cocks (Part No.61122)

KAI – Radiator Cap (Part No.GMK404030657)

Flex A Lite – 27 in. Electric Fan (Part No.295)

Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – Engine Coolant Temperature Switch (Part No.WTA1137)

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14544)

Carquest Premium – Engine Coolant Temperature Switch (Part No.WTA1105)